target/linux/ramips/dts/PBR-M1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   7         model = "PBR-M1";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x10000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,115200";
  16         };
  17
  18         sdhci@10130000 {
  19                 status = "okay";
  20                 pinctrl-names = "default";
  21                 pinctrl-0 = <&sdhci_pins>;
  22         };
  23
  24         xhci@1E1C0000 {
  25                 status = "okay";
  26         };
  27
  28         palmbus@1E000000 {
  29                 spi@b00 {
  30                         status = "okay";
  31
  32                         m25p80@0 {
  33                                 #address-cells = <1>;
  34                                 #size-cells = <1>;
  35                                 compatible = "jedec,spi-nor";
  36                                 reg = <0 0>;
  37                                 linux,modalias = "m25p80";
  38                                 spi-max-frequency = <10000000>;
  39
  40                                 partition@0 {
  41                                         label = "u-boot";
  42                                         reg = <0x0 0x30000>;
  43                                         read-only;
  44                                 };
  45
  46                                 partition@30000 {
  47                                         label = "u-boot-env";
  48                                         reg = <0x30000 0x10000>;
  49                                         read-only;
  50                                 };
  51
  52                                 factory: partition@40000 {
  53                                         label = "factory";
  54                                         reg = <0x40000 0x10000>;
  55                                         read-only;
  56                                 };
  57
  58                                 partition@50000 {
  59                                         label = "firmware";
  60                                         reg = <0x50000 0xfb0000>;
  61                                 };
  62
  63                         };
  64                 };
  65
  66                 i2c@900 {
  67                         compatible = "ralink,i2c-mt7621";
  68                         reg = <0x900 0x100>;
  69                         #address-cells = <1>;
  70                         #size-cells = <0>;
  71                         pinctrl-names = "default";
  72                         pinctrl-0 = <&i2c_pins>;
  73                         status = "okay";
  74
  75                         pcf8563: rtc@51 {
  76                                 status = "okay";
  77                                 compatible = "nxp,pcf8563";
  78                                 reg = <0x51>;
  79                         };
  80                 };
  81         };
  82
  83         pcie@1e140000 {
  84                 status = "okay";
  85
  86                 pcie0 {
  87                         mt76@0,0 {
  88                                 reg = <0x0000 0 0 0 0>;
  89                                 device_type = "pci";
  90                                 mediatek,mtd-eeprom = <&factory 0x8000>;
  91                                 mediatek,2ghz = <0>;
  92                         };
  93                 };
  94
  95                 pcie1 {
  96                         mt76@1,0 {
  97                                 reg = <0x0000 0 0 0 0>;
  98                                 device_type = "pci";
  99                                 mediatek,mtd-eeprom = <&factory 0x0000>;
 100                                 mediatek,5ghz = <0>;
 101                         };
 102                 };
 103         };
 104
 105         ethernet@1e100000 {
 106                 mtd-mac-address = <&factory 0xe000>;
 107         };
 108
 109         gpio-leds {
 110                 compatible = "gpio-leds";
 111
 112                 power {
 113                         label = "pbr-m1:blue:power";
 114                         gpios = <&gpio0 31 1>;
 115                 };
 116
 117                 sys {
 118                         label = "pbr-m1:blue:sys";
 119                         gpios = <&gpio1 0 1>;
 120                 };
 121
 122                 internet {
 123                         label = "pbr-m1:blue:internet";
 124                         gpios = <&gpio0 29 1>;
 125                 };
 126
 127                 wlan2g {
 128                         label = "pbr-m1:blue:wlan2g";
 129                         gpios = <&gpio1 1 1>;
 130                 };
 131
 132                 wlan5g {
 133                         label = "pbr-m1:blue:wlan5g";
 134                         gpios = <&gpio0 28 1>;
 135                 };
 136         };
 137
 138         gpio-keys-polled {
 139                 compatible = "gpio-keys-polled";
 140                 #address-cells = <1>;
 141                 #size-cells = <0>;
 142                 poll-interval = <20>;
 143
 144                 reset {
 145                         label = "reset";
 146                         gpios = <&gpio0 18 1>;
 147                         linux,code = <0x198>;
 148                 };
 149         };
 150
 151         gpio_export {
 152                 compatible = "gpio-export";
 153                 #size-cells = <0>;
 154
 155                 power_usb2 {
 156                         gpio-export,name = "power_usb2";
 157                         gpio-export,output = <1>;
 158                         gpios = <&gpio0 22 0>;
 159                 };
 160
 161                 power_usb3 {
 162                         gpio-export,name = "power_usb3";
 163                         gpio-export,output = <1>;
 164                         gpios = <&gpio0 25 0>;
 165                 };
 166
 167                 power_sata {
 168                         gpio-export,name = "power_sata";
 169                         gpio-export,output = <1>;
 170                         gpios = <&gpio0 27 0>;
 171                 };
 172         };
 173
 174         beeper: beeper {
 175                 compatible = "gpio-beeper";
 176                 gpios = <&gpio0 26 1>;
 177         };
 178
 179         pinctrl {
 180                 state_default: pinctrl0 {
 181                         gpio {
 182                                 ralink,group = "wdt", "rgmii2", "jtag", "mdio";
 183                                 ralink,function = "gpio";
 184                         };
 185                 };
 186         };
 187 };