target/linux/ramips/dts/NW718.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netcore,nw718", "ralink,rt3050-soc";
  10         model = "Netcore NW718";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 cpu {
  16                         label = "nw718:amber:cpu";
  17                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 usb {
  21                         label = "nw718:amber:usb";
  22                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 wps {
  26                         label = "nw718:amber:wps";
  27                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  28                 };
  29         };
  30
  31         gpio-keys-polled {
  32                 compatible = "gpio-keys-polled";
  33                 #address-cells = <1>;
  34                 #size-cells = <0>;
  35                 poll-interval = <20>;
  36
  37                 reset {
  38                         label = "reset";
  39                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  40                         linux,code = <KEY_RESTART>;
  41                 };
  42
  43                 wps {
  44                         label = "wps";
  45                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_WPS_BUTTON>;
  47                 };
  48         };
  49 };
  50
  51 &spi0 {
  52         status = "okay";
  53
  54         m25p80@0 {
  55                 #address-cells = <1>;
  56                 #size-cells = <1>;
  57                 compatible = "jedec,spi-nor";
  58                 reg = <0>;
  59                 spi-max-frequency = <25000000>;
  60
  61                 partition@0 {
  62                         label = "u-boot";
  63                         reg = <0x0 0x30000>;
  64                         read-only;
  65                 };
  66
  67                 partition@30000 {
  68                         label = "config";
  69                         reg = <0x30000 0x20000>;
  70                         read-only;
  71                 };
  72
  73                 factory: partition@50000 {
  74                         label = "factory";
  75                         reg = <0x50000 0x10000>;
  76                         read-only;
  77                 };
  78
  79                 partition@60000 {
  80                         label = "firmware";
  81                         reg = <0x60000 0x3a0000>;
  82                 };
  83         };
  84 };
  85
  86 &pinctrl {
  87         state_default: pinctrl0 {
  88                 gpio {
  89                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  90                         ralink,function = "gpio";
  91                 };
  92         };
  93 };
  94
  95 &ethernet {
  96         mtd-mac-address = <&factory 0x4>;
  97 };
  98
  99 &esw {
 100         mediatek,portmap = <0x2f>;
 101 };
 102
 103 &wmac {
 104         ralink,mtd-eeprom = <&factory 0>;
 105 };
 106
 107 &otg {
 108         status = "okay";
 109 };