target/linux/ramips/dts/NCS601W.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "NCS601W", "ralink,rt5350-soc";
   7         model = "Wansview NCS601W";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         m25p80@0 {
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16                 compatible = "jedec,spi-nor";
  17                 reg = <0>;
  18                 spi-max-frequency = <10000000>;
  19
  20                 partition@0 {
  21                         label = "u-boot";
  22                         reg = <0x0 0x30000>;
  23                         read-only;
  24                 };
  25
  26                 partition@30000 {
  27                         label = "u-boot-env";
  28                         reg = <0x30000 0x10000>;
  29                         read-only;
  30                 };
  31
  32                 factory: partition@40000 {
  33                         label = "factory";
  34                         reg = <0x40000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 partition@50000 {
  39                         label = "firmware";
  40                         reg = <0x50000 0x7b0000>;
  41                 };
  42         };
  43 };
  44
  45 &pinctrl {
  46         state_default: pinctrl0 {
  47                 gpio {
  48                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  49                         ralink,function = "gpio";
  50                 };
  51         };
  52 };
  53
  54 &ethernet {
  55         mtd-mac-address = <&factory 0x4>;
  56 };
  57
  58 &esw {
  59         mediatek,portmap = <0x2f>;
  60 };
  61
  62 &wmac {
  63         ralink,mtd-eeprom = <&factory 0>;
  64 };
  65
  66 &ehci {
  67         status = "okay";
  68 };
  69
  70 &ohci {
  71         status = "okay";
  72 };