target/linux/ramips/dts/NBG-419N2.dts

   1 /dts-v1/;
   2
   3 #include "rt3352.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "NBG-419N2", "ralink,rt3352-soc";
   9         model = "ZyXEL NBG-419N v2";
  10
  11         palmbus@10000000 {
  12                 spi@b00 {
  13                         status = "okay";
  14                         m25p80@0 {
  15                                 #address-cells = <1>;
  16                                 #size-cells = <1>;
  17                                 compatible = "jedec,spi-nor";
  18                                 reg = <0 0>;
  19                                 spi-max-frequency = <10000000>;
  20
  21                                 partition@0 {
  22                                         label = "u-boot";
  23                                         reg = <0x0 0x30000>;
  24                                         read-only;
  25                                 };
  26
  27                                 partition@30000 {
  28                                         label = "u-boot-env";
  29                                         reg = <0x30000 0x10000>;
  30                                         read-only;
  31                                 };
  32
  33                                 factory: partition@40000 {
  34                                         label = "factory";
  35                                         reg = <0x40000 0x10000>;
  36                                         read-only;
  37                                 };
  38
  39                                 partition@50000 {
  40                                         label = "firmware";
  41                                         reg = <0x50000 0x7b0000>;
  42                                 };
  43                         };
  44                 };
  45         };
  46
  47         gpio-leds {
  48                 compatible = "gpio-leds";
  49
  50                 power {
  51                         label = "nbg-419n2:green:power";
  52                         gpios = <&gpio0 9 1>;
  53                 };
  54
  55                 wps {
  56                         label = "nbg-419n2:green:wps";
  57                         gpios = <&gpio0 14 1>;
  58                 };
  59
  60                 usb {
  61                         label = "nbg-419n2:green:usb";
  62                         gpios = <&gpio0 13 1>;
  63                 };
  64         };
  65
  66         gpio-keys-polled {
  67                 compatible = "gpio-keys-polled";
  68                 #address-cells = <1>;
  69                 #size-cells = <0>;
  70                 poll-interval = <20>;
  71                 reset {
  72                         label = "reset";
  73                         gpios = <&gpio0 10 1>;
  74                         linux,code = <KEY_RESTART>;
  75                 };
  76                 wps {
  77                         label = "wps";
  78                         gpios = <&gpio0 0 1>;
  79                         linux,code = <KEY_WPS_BUTTON>;
  80                 };
  81                 rfkill {
  82                         label = "rfkill";
  83                         linux,input-type = <EV_SW>;
  84                         gpios = <&gpio0 12 0>;
  85                         linux,code = <KEY_RFKILL>;
  86                 };
  87         };
  88
  89 };
  90
  91 &pinctrl {
  92         state_default: pinctrl0 {
  93                 gpio {
  94                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  95                         ralink,function = "gpio";
  96                 };
  97         };
  98 };
  99
 100 &ethernet {
 101         mtd-mac-address = <&factory 0x28>;
 102 };
 103
 104 &esw {
 105         ralink,portmap = <0x2f>;
 106 };
 107
 108 &wmac {
 109         ralink,mtd-eeprom = <&factory 0>;
 110 };
 111
 112 &ehci {
 113         status = "okay";
 114 };
 115
 116 &ohci {
 117         status = "okay";
 118 };