target/linux/ramips/dts/MZK-EX750NP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Planex MZK-EX750NP";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 power {
  13                         label = "mzk-ex750np:red:power";
  14                         gpios = <&gpio0 14 1>;
  15                 };
  16
  17                 wifi {
  18                         label = "mzk-ex750np:red:wifi";
  19                         gpios = <&gpio3 0 1>;
  20                 };
  21
  22                 wps {
  23                         label = "mzk-ex750np:green:wps";
  24                         gpios = <&gpio0 10 1>;
  25                 };
  26
  27                 rep {
  28                         label = "mzk-ex750np:blue:rep";
  29                         gpios = <&gpio2 16 1>;
  30                 };
  31
  32                 wifi1 {
  33                         label = "mzk-ex750np:blue:wifi1";
  34                         gpios = <&gpio2 19 1>;
  35                 };
  36
  37                 wifi2 {
  38                         label = "mzk-ex750np:blue:wifi2";
  39                         gpios = <&gpio2 18 1>;
  40                 };
  41
  42                 wifi3 {
  43                         label = "mzk-ex750np:blue:wifi3";
  44                         gpios = <&gpio2 17 1>;
  45                 };
  46         };
  47
  48         gpio-keys-polled {
  49                 compatible = "gpio-keys-polled";
  50                 #address-cells = <1>;
  51                 #size-cells = <0>;
  52                 poll-interval = <20>;
  53
  54                 reset {
  55                         label = "reset";
  56                         gpios = <&gpio0 9 1>;
  57                         linux,code = <0x198>;
  58                 };
  59
  60                 wps {
  61                         label = "wps";
  62                         gpios = <&gpio0 13 0>;
  63                         linux,code = <0x211>;
  64                 };
  65         };
  66 };
  67
  68 &gpio2 {
  69         status = "okay";
  70 };
  71
  72 &gpio3 {
  73         status = "okay";
  74 };
  75
  76 &spi0 {
  77         status = "okay";
  78
  79         m25p80@0 {
  80                 #address-cells = <1>;
  81                 #size-cells = <1>;
  82                 compatible = "jedec,spi-nor";
  83                 reg = <0 0>;
  84                 linux,modalias = "m25p80", "w25q64";
  85                 spi-max-frequency = <10000000>;
  86
  87                 partition@0 {
  88                         label = "u-boot";
  89                         reg = <0x0 0x30000>;
  90                         read-only;
  91                 };
  92
  93                 partition@30000 {
  94                         label = "u-boot-env";
  95                         reg = <0x30000 0x10000>;
  96                         read-only;
  97                 };
  98
  99                 factory: partition@40000 {
 100                         label = "factory";
 101                         reg = <0x40000 0x10000>;
 102                         read-only;
 103                 };
 104
 105                 partition@50000 {
 106                         label = "firmware";
 107                         reg = <0x50000 0x730000>;
 108                 };
 109
 110                 partition@780000 {
 111                         label = "Udata";
 112                         reg = <0x780000 0x80000>;
 113                 };
 114         };
 115 };
 116
 117 &pinctrl {
 118         state_default: pinctrl0 {
 119                 gpio {
 120                         ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
 121                         ralink,function = "gpio";
 122                 };
 123         };
 124 };
 125
 126 &ethernet {
 127         pinctrl-names = "default";
 128         pinctrl-0 = <&ephy_pins>;
 129         mtd-mac-address = <&factory 0x4>;
 130         mediatek,portmap = "llllw";
 131 };
 132
 133 &wmac {
 134         ralink,mtd-eeprom = <&factory 0>;
 135 };
 136
 137 &pcie {
 138         status = "okay";
 139
 140         pcie-bridge {
 141                 mt76@0,0 {
 142                         reg = <0x0000 0 0 0 0>;
 143                         device_type = "pci";
 144                         mediatek,mtd-eeprom = <&factory 0x8000>;
 145                         mediatek,2ghz = <0>;
 146                 };
 147         };
 148 };