target/linux/ramips/dts/MZK-EX750NP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
  10         model = "Planex MZK-EX750NP";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 power {
  16                         label = "mzk-ex750np:red:power";
  17                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 wifi {
  21                         label = "mzk-ex750np:red:wifi";
  22                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 wps {
  26                         label = "mzk-ex750np:green:wps";
  27                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 rep {
  31                         label = "mzk-ex750np:blue:rep";
  32                         gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wifi1 {
  36                         label = "mzk-ex750np:blue:wifi1";
  37                         gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 wifi2 {
  41                         label = "mzk-ex750np:blue:wifi2";
  42                         gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 wifi3 {
  46                         label = "mzk-ex750np:blue:wifi3";
  47                         gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
  48                 };
  49         };
  50
  51         gpio-keys-polled {
  52                 compatible = "gpio-keys-polled";
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55                 poll-interval = <20>;
  56
  57                 reset {
  58                         label = "reset";
  59                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_RESTART>;
  61                 };
  62
  63                 wps {
  64                         label = "wps";
  65                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  66                         linux,code = <KEY_RFKILL>;
  67                 };
  68         };
  69 };
  70
  71 &gpio2 {
  72         status = "okay";
  73 };
  74
  75 &gpio3 {
  76         status = "okay";
  77 };
  78
  79 &spi0 {
  80         status = "okay";
  81
  82         m25p80@0 {
  83                 #address-cells = <1>;
  84                 #size-cells = <1>;
  85                 compatible = "jedec,spi-nor";
  86                 reg = <0>;
  87                 spi-max-frequency = <10000000>;
  88
  89                 partition@0 {
  90                         label = "u-boot";
  91                         reg = <0x0 0x30000>;
  92                         read-only;
  93                 };
  94
  95                 partition@30000 {
  96                         label = "u-boot-env";
  97                         reg = <0x30000 0x10000>;
  98                         read-only;
  99                 };
 100
 101                 factory: partition@40000 {
 102                         label = "factory";
 103                         reg = <0x40000 0x10000>;
 104                         read-only;
 105                 };
 106
 107                 partition@50000 {
 108                         label = "firmware";
 109                         reg = <0x50000 0x730000>;
 110                 };
 111
 112                 partition@780000 {
 113                         label = "Udata";
 114                         reg = <0x780000 0x80000>;
 115                 };
 116         };
 117 };
 118
 119 &pinctrl {
 120         state_default: pinctrl0 {
 121                 gpio {
 122                         ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
 123                         ralink,function = "gpio";
 124                 };
 125         };
 126 };
 127
 128 &ethernet {
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&ephy_pins>;
 131         mtd-mac-address = <&factory 0x4>;
 132         mediatek,portmap = "llllw";
 133 };
 134
 135 &wmac {
 136         ralink,mtd-eeprom = <&factory 0>;
 137 };
 138
 139 &pcie {
 140         status = "okay";
 141
 142         pcie-bridge {
 143                 mt76@0,0 {
 144                         reg = <0x0000 0 0 0 0>;
 145                         device_type = "pci";
 146                         mediatek,mtd-eeprom = <&factory 0x8000>;
 147                 };
 148         };
 149 };