target/linux/ramips/dts/MZK-750DHP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Planex MZK-750DHP";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 wps {
  13                         label = "mzk-750dhp:green:wps";
  14                         gpios = <&gpio2 15 1>;
  15                 };
  16
  17                 power {
  18                         label = "mzk-750dhp:green:power";
  19                         gpios = <&gpio1 15 1>;
  20                 };
  21
  22                 wlan5g {
  23                         label = "mzk-750dhp:green:wlan5g";
  24                         gpios = <&gpio1 14 1>;
  25                 };
  26         };
  27
  28         gpio-keys-polled {
  29                 compatible = "gpio-keys-polled";
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 poll-interval = <20>;
  33
  34                 s1 {
  35                         label = "reset";
  36                         gpios = <&gpio0 1 1>;
  37                         linux,code = <0x198>;
  38                 };
  39
  40                 s2 {
  41                         label = "wps";
  42                         gpios = <&gpio2 19 1>;
  43                         linux,code = <0x211>;
  44                 };
  45         };
  46 };
  47
  48 &gpio1 {
  49         status = "okay";
  50 };
  51
  52 &gpio2 {
  53         status = "okay";
  54 };
  55
  56 &spi0 {
  57         status = "okay";
  58
  59         m25p80@0 {
  60                 #address-cells = <1>;
  61                 #size-cells = <1>;
  62                 compatible = "jedec,spi-nor";
  63                 reg = <0>;
  64                 linux,modalias = "m25p80", "mx25l6405d";
  65                 spi-max-frequency = <10000000>;
  66
  67                 partition@0 {
  68                         label = "u-boot";
  69                         reg = <0x0 0x30000>;
  70                         read-only;
  71                 };
  72
  73                 partition@30000 {
  74                         label = "u-boot-env";
  75                         reg = <0x30000 0x10000>;
  76                         read-only;
  77                 };
  78
  79                 factory: partition@40000 {
  80                         label = "factory";
  81                         reg = <0x40000 0x10000>;
  82                         read-only;
  83                 };
  84
  85                 partition@50000 {
  86                         label = "firmware";
  87                         reg = <0x50000 0x7b0000>;
  88                 };
  89         };
  90 };
  91
  92 &pinctrl {
  93         state_default: pinctrl0 {
  94                 gpio {
  95                         ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
  96                         ralink,function = "gpio";
  97                 };
  98         };
  99 };
 100
 101 &ethernet {
 102         pinctrl-names = "default";
 103         pinctrl-0 = <&ephy_pins>;
 104         mtd-mac-address = <&factory 0x4>;
 105         mediatek,portmap = "llllw";
 106 };
 107
 108 &gsw {
 109         mediatek,port4 = "ephy";
 110 };
 111
 112 &wmac {
 113         ralink,mtd-eeprom = <&factory 0>;
 114 };
 115
 116 &pcie {
 117         status = "okay";
 118
 119         pcie-bridge {
 120                 mt76@0,0 {
 121                         reg = <0x0000 0 0 0 0>;
 122                         device_type = "pci";
 123                         mediatek,mtd-eeprom = <&factory 0x8000>;
 124                         mediatek,2ghz = <0>;
 125                 };
 126         };
 127 };