target/linux/ramips/dts/MT7620a_MT7610e.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   9         model = "Ralink MT7620A evaluation board";
  10
  11         gpio-keys-polled {
  12                 compatible = "gpio-keys";
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15                 poll-interval = <20>;
  16
  17                 wps {
  18                         label = "wps";
  19                         gpios = <&gpio0 12 1>;
  20                         linux,code = <BTN_0>;
  21                 };
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio0 13 1>;
  26                         linux,code = <BTN_1>;
  27                 };
  28         };
  29 };
  30
  31 &gpio0 {
  32         status = "okay";
  33 };
  34
  35 &spi0 {
  36         status = "okay";
  37
  38         m25p80@0 {
  39                 #address-cells = <1>;
  40                 #size-cells = <1>;
  41                 compatible = "jedec,spi-nor";
  42                 reg = <0>;
  43                 spi-max-frequency = <1000000>;
  44
  45                 partition@0 {
  46                         label = "u-boot";
  47                         reg = <0x0 0x30000>;
  48                         read-only;
  49                 };
  50
  51                 partition@30000 {
  52                         label = "u-boot-env";
  53                         reg = <0x30000 0x10000>;
  54                         read-only;
  55                 };
  56
  57                 factory: partition@40000 {
  58                         label = "factory";
  59                         reg = <0x40000 0x10000>;
  60                         read-only;
  61                 };
  62
  63                 partition@50000 {
  64                         label = "firmware";
  65                         reg = <0x50000 0x7b0000>;
  66                 };
  67         };
  68 };
  69
  70 &ethernet {
  71         status = "okay";
  72         pinctrl-names = "default";
  73         pinctrl-0 = <&ephy_pins>;
  74         mediatek,portmap = "llllw";
  75 };
  76
  77 &gsw {
  78         mediatek,port4 = "ephy";
  79 };
  80
  81 &sdhci {
  82         status = "okay";
  83 };
  84
  85 &pcie {
  86         status = "okay";
  87 };