target/linux/ramips/dts/MPRA1.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "hame,mpr-a1", "ralink,rt5350-soc";
  10         model = "HAME MPR-A1";
  11
  12         aliases {
  13                 led-status = &led_system;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_system: system {
  20                         label = "mpr-a1:blue:system";
  21                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 power {
  25                         label = "mpr-a1:red:power";
  26                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 poll-interval = <20>;
  33
  34                 wps {
  35                         label = "reset";
  36                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_RESTART>;
  38                 };
  39         };
  40
  41         gpio_export {
  42                 compatible = "gpio-export";
  43                 #size-cells = <0>;
  44
  45                 usb {
  46                         gpio-export,name = "usb";
  47                         gpio-export,output = <1>;
  48                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  49                 };
  50
  51                 root_hub {
  52                         gpio-export,name = "root_hub";
  53                         gpio-export,output = <1>;
  54                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  55                 };
  56         };
  57 };
  58
  59 &spi0 {
  60         status = "okay";
  61
  62         m25p80@0 {
  63                 compatible = "jedec,spi-nor";
  64                 reg = <0>;
  65                 spi-max-frequency = <10000000>;
  66
  67                 partitions {
  68                         compatible = "fixed-partitions";
  69                         #address-cells = <1>;
  70                         #size-cells = <1>;
  71
  72                         partition@0 {
  73                                 label = "u-boot";
  74                                 reg = <0x0 0x30000>;
  75                                 read-only;
  76                         };
  77
  78                         partition@30000 {
  79                                 label = "u-boot-env";
  80                                 reg = <0x30000 0x10000>;
  81                                 read-only;
  82                         };
  83
  84                         factory: partition@40000 {
  85                                 label = "factory";
  86                                 reg = <0x40000 0x10000>;
  87                                 read-only;
  88                         };
  89
  90                         partition@50000 {
  91                                 label = "firmware";
  92                                 reg = <0x50000 0x3b0000>;
  93                         };
  94                 };
  95         };
  96 };
  97
  98 &gpio1 {
  99         status = "okay";
 100 };
 101
 102 &pinctrl {
 103         state_default: pinctrl0 {
 104                 gpio {
 105                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
 106                         ralink,function = "gpio";
 107                 };
 108         };
 109 };
 110
 111 &ethernet {
 112         mtd-mac-address = <&factory 0x4>;
 113 };
 114
 115 &esw {
 116         mediatek,portmap = <0x2f>;
 117 };
 118
 119 &wmac {
 120         ralink,mtd-eeprom = <&factory 0>;
 121 };
 122
 123 &ehci {
 124         status = "okay";
 125 };
 126
 127 &ohci {
 128         status = "okay";
 129 };