target/linux/ramips/dts/MAC1200RV2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 / {
   6         compatible = "mercury,mac1200rv2", "mediatek,mt7628an-soc";
   7         model = "Mercury MAC1200R v2";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,57600";
  11         };
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x2000000>;
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20                 status {
  21                         label = "mac1200rv2:green:status";
  22                         gpios = <&gpio0 11 1>;
  23                 };
  24         };
  25 };
  26
  27 &spi0 {
  28         status = "okay";
  29
  30         m25p80@0 {
  31                 #address-cells = <1>;
  32                 #size-cells = <1>;
  33                 compatible = "jedec,spi-nor";
  34                 reg = <0 0>;
  35                 spi-max-frequency = <10000000>;
  36                 m25p,chunked-io = <32>;
  37
  38                 partition@0 {
  39                         label = "u-boot";
  40                         reg = <0x0 0x1d800>;
  41                 };
  42
  43                 factory: partition@0x1d800 {
  44                         label = "factory_info";
  45                         reg = <0x1d800 0x800>;
  46                         read-only;
  47                 };
  48
  49                 art: partition@0x1e000 {
  50                         label = "art";
  51                         reg = <0x1e000 0x2000>;
  52                         read-only;
  53                 };
  54
  55                 partition@20000 {
  56                         label = "config";
  57                         reg = <0x20000 0x10000>;
  58                 };
  59
  60                 partition@30000 {
  61                         label = "u-boot2";
  62                         reg = <0x30000 0x10000>;
  63                 };
  64
  65                 partition@40000 {
  66                         label = "firmware";
  67                         reg = <0x40000 0x7c0000>;
  68                 };
  69         };
  70 };
  71
  72 &ethernet {
  73         pinctrl-names = "default";
  74         mtd-mac-address = <&factory 0xd>;
  75         ralink,port-map = "llllw";
  76 };
  77
  78 &wmac {
  79         status = "okay";
  80         ralink,mtd-eeprom = <&art 0x0>;
  81 };
  82
  83 &pcie {
  84         status = "okay";
  85         pcie-bridge {
  86                 mt76@0,0 {
  87                         reg = <0x0000 0 0 0 0>;
  88                         device_type = "pci";
  89                         mediatek,mtd-eeprom = <&art 0x1000>;
  90                         mediatek,2ghz = <0>;
  91                 };
  92         };
  93 };