target/linux/ramips/dts/M3.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "M3", "ralink,rt5350-soc";
   7         model = "Poray M3";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 status {
  13                         label = "m3:blue:status";
  14                         gpios = <&gpio0 9 1>;
  15                 };
  16         };
  17
  18         gpio-keys-polled {
  19                 compatible = "gpio-keys-polled";
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22                 poll-interval = <20>;
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&gpio0 10 1>;
  27                         linux,code = <0x198>;
  28                 };
  29
  30                 mode {
  31                         label = "mode";
  32                         gpios = <&gpio0 17 1>;
  33                         linux,code = <0x100>;
  34                         linux,input-type = <5>;
  35                 };
  36         };
  37 };
  38
  39 &spi0 {
  40         status = "okay";
  41
  42         m25p80@0 {
  43                 #address-cells = <1>;
  44                 #size-cells = <1>;
  45                 compatible = "jedec,spi-nor";
  46                 reg = <0>;
  47                 linux,modalias = "m25p80", "w25q32";
  48                 spi-max-frequency = <10000000>;
  49
  50                 partition@0 {
  51                         label = "u-boot";
  52                         reg = <0x0 0x30000>;
  53                         read-only;
  54                 };
  55
  56                 partition@30000 {
  57                         label = "u-boot-env";
  58                         reg = <0x30000 0x10000>;
  59                         read-only;
  60                 };
  61
  62                 factory: partition@40000 {
  63                         label = "factory";
  64                         reg = <0x40000 0x10000>;
  65                         read-only;
  66                 };
  67
  68                 partition@50000 {
  69                         label = "firmware";
  70                         reg = <0x50000 0x3b0000>;
  71                 };
  72         };
  73 };
  74
  75 &pinctrl {
  76         state_default: pinctrl0 {
  77                 gpio {
  78                         ralink,group = "i2c", "jtag", "uartf";
  79                         ralink,function = "gpio";
  80                 };
  81         };
  82 };
  83
  84 &ethernet {
  85         mtd-mac-address = <&factory 0x4>;
  86 };
  87
  88 &esw {
  89         mediatek,portmap = <0x2f>;
  90         mediatek,led_polarity = <1>;
  91 };
  92
  93 &wmac {
  94         ralink,mtd-eeprom = <&factory 0>;
  95         ralink,led-polarity = <1>;
  96 };
  97
  98 &ehci {
  99         status = "okay";
 100 };
 101
 102 &ohci {
 103         status = "okay";
 104 };