target/linux/ramips/dts/M2M.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "intenso,memory2move", "ralink,rt5350-soc";
  10         model = "Intenso Memory 2 Move";
  11
  12         aliases {
  13                 led-boot = &led_wifi;
  14                 led-failsafe = &led_wifi;
  15                 led-running = &led_wifi;
  16                 led-upgrade = &led_wifi;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
  21         };
  22
  23         gpio-leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_wifi: wifi {
  27                         label = "m2m:blue:wifi";
  28                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 wan {
  32                         label = "m2m:green:wan";
  33                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  34                 };
  35         };
  36
  37         gpio-keys-polled {
  38                 compatible = "gpio-keys-polled";
  39                 poll-interval = <20>;
  40
  41                 power {
  42                         label = "power";
  43                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_POWER>;
  45                 };
  46
  47                 reset {
  48                         label = "reset";
  49                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52         };
  53 };
  54
  55 &spi0 {
  56         status = "okay";
  57
  58         m25p80@0 {
  59                 compatible = "jedec,spi-nor";
  60                 reg = <0>;
  61                 spi-max-frequency = <10000000>;
  62
  63                 partitions {
  64                         compatible = "fixed-partitions";
  65                         #address-cells = <1>;
  66                         #size-cells = <1>;
  67
  68                         partition@0 {
  69                                 label = "Bootloader";
  70                                 reg = <0x0 0x30000>;
  71                                 read-only;
  72                         };
  73
  74                         partition@30000 {
  75                                 label = "Config";
  76                                 reg = <0x30000 0x10000>;
  77                                 read-only;
  78                         };
  79
  80                         factory: partition@40000 {
  81                                 label = "Factory";
  82                                 reg = <0x40000 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@50000 {
  87                                 label = "firmware";
  88                                 reg = <0x50000 0x7b0000>;
  89                         };
  90                 };
  91         };
  92 };
  93
  94 &pinctrl {
  95         state_default: pinctrl0 {
  96                 gpio {
  97                         ralink,group = "i2c", "uartf";
  98                         ralink,function = "gpio";
  99                 };
 100         };
 101 };
 102
 103 &ethernet {
 104         mtd-mac-address = <&factory 0x28>;
 105 };
 106
 107 &esw {
 108         mediatek,portmap = <0x2f>;
 109 };
 110
 111 &ehci {
 112         status = "okay";
 113 };
 114
 115 &ohci {
 116         status = "okay";
 117 };
 118
 119 &wmac {
 120         ralink,mtd-eeprom = <&factory 0x0>;
 121 };