target/linux/ramips/dts/JHR-N805R.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "jcg,jhr-n805r", "ralink,rt3050-soc";
  10         model = "JCG JHR-N805R";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 system {
  16                         label = "jhr-n805r:blue:system";
  17                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  18                 };
  19         };
  20
  21         gpio-keys-polled {
  22                 compatible = "gpio-keys-polled";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25                 poll-interval = <20>;
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32         };
  33 };
  34
  35 &pinctrl {
  36         state_default: pinctrl0 {
  37                 gpio {
  38                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  39                         ralink,function = "gpio";
  40                 };
  41         };
  42 };
  43
  44 &spi0 {
  45         status = "okay";
  46
  47         m25p80@0 {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 compatible = "jedec,spi-nor";
  51                 reg = <0>;
  52                 spi-max-frequency = <10000000>;
  53
  54                 partition@0 {
  55                         label = "u-boot";
  56                         reg = <0x0 0x30000>;
  57                         read-only;
  58                 };
  59
  60                 partition@30000 {
  61                         label = "u-boot-env";
  62                         reg = <0x30000 0x10000>;
  63                         read-only;
  64                 };
  65
  66                 factory: partition@40000 {
  67                         label = "factory";
  68                         reg = <0x40000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 partition@50000 {
  73                         label = "firmware";
  74                         reg = <0x50000 0x3b0000>;
  75                 };
  76         };
  77 };
  78
  79 &ethernet {
  80         mtd-mac-address = <&factory 0x2e>;
  81 };
  82
  83 &esw {
  84         mediatek,portmap = <0x3e>;
  85 };
  86
  87 &wmac {
  88         ralink,mtd-eeprom = <&factory 0>;
  89 };