target/linux/ramips/dts/HC5661A.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
  10         model = "HiWiFi HC5661A";
  11
  12         chosen {
  13                 bootargs = "console=ttyS0,115200";
  14         };
  15
  16         memory@0 {
  17                 device_type = "memory";
  18                 reg = <0x0 0x8000000>;
  19         };
  20
  21         gpio-leds {
  22                 compatible = "gpio-leds";
  23
  24                 system {
  25                         label = "hc5661a:blue:system";
  26                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  27                 };
  28                 internet {
  29                         label = "hc5661a:blue:internet";
  30                         gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  31                 };
  32                 wlan2g {
  33                         label = "hc5661a:blue:wlan2g";
  34                         gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
  35                 };
  36         };
  37
  38         gpio-keys {
  39                 compatible = "gpio-keys-polled";
  40                 #address-cells = <1>;
  41                 #size-cells = <0>;
  42                 poll-interval = <20>;
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_RESTART>;
  48                 };
  49         };
  50 };
  51
  52 &pinctrl {
  53         state_default: pinctrl0 {
  54                 gpio {
  55                         ralink,group = "i2c", "refclk", "wled_an";
  56                         ralink,function = "gpio";
  57                 };
  58         };
  59 };
  60
  61 &spi0 {
  62         status = "okay";
  63
  64         m25p80@0 {
  65                 #address-cells = <1>;
  66                 #size-cells = <1>;
  67                 compatible = "jedec,spi-nor";
  68                 reg = <0>;
  69                 linux,modalias = "m25p80", "w25q128";
  70                 spi-max-frequency = <10000000>;
  71                 m25p,chunked-io = <32>;
  72
  73                 partition@0 {
  74                         label = "u-boot";
  75                         reg = <0x0 0x30000>;
  76                         read-only;
  77                 };
  78
  79                 partition@30000 {
  80                         label = "hw_panic";
  81                         reg = <0x30000 0x10000>;
  82                         read-only;
  83                 };
  84
  85                 factory: partition@40000 {
  86                         label = "factory";
  87                         reg = <0x40000 0x10000>;
  88                         read-only;
  89                 };
  90
  91                 partition@50000 {
  92                         label = "firmware";
  93                         reg = <0x50000 0xf70000>;
  94                 };
  95
  96                 partition@fc0000 {
  97                         label = "oem";
  98                         reg = <0xfc0000 0x20000>;
  99                         read-only;
 100                 };
 101
 102                 bdinfo: partition@fe0000 {
 103                         label = "bdinfo";
 104                         reg = <0xfe0000 0x10000>;
 105                         read-only;
 106                 };
 107
 108                 partition@ff0000 {
 109                         label = "backup";
 110                         reg = <0xff0000 0x10000>;
 111                         read-only;
 112                 };
 113         };
 114 };
 115
 116 &ethernet {
 117         mtd-mac-address = <&factory 0x4>;
 118         mediatek,portmap = "wllll";
 119 };
 120
 121 &wmac {
 122         status = "okay";
 123 };