target/linux/ramips/dts/HC5661A.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
  10         model = "HiWiFi HC5661A";
  11
  12         aliases {
  13                 led-status = &led_system;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         memory@0 {
  21                 device_type = "memory";
  22                 reg = <0x0 0x8000000>;
  23         };
  24
  25         gpio-leds {
  26                 compatible = "gpio-leds";
  27
  28                 led_system: system {
  29                         label = "hc5661a:blue:system";
  30                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  31                 };
  32                 internet {
  33                         label = "hc5661a:blue:internet";
  34                         gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  35                 };
  36                 wlan2g {
  37                         label = "hc5661a:blue:wlan2g";
  38                         gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
  39                 };
  40         };
  41
  42         gpio-keys {
  43                 compatible = "gpio-keys-polled";
  44                 poll-interval = <20>;
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51         };
  52 };
  53
  54 &pinctrl {
  55         state_default: pinctrl0 {
  56                 gpio {
  57                         ralink,group = "i2c", "refclk", "wled_an";
  58                         ralink,function = "gpio";
  59                 };
  60         };
  61 };
  62
  63 &sdhci {
  64         status = "okay";
  65 };
  66
  67 &spi0 {
  68         status = "okay";
  69
  70         m25p80@0 {
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 linux,modalias = "m25p80", "w25q128";
  74                 spi-max-frequency = <10000000>;
  75                 m25p,chunked-io = <32>;
  76
  77                 partitions {
  78                         compatible = "fixed-partitions";
  79                         #address-cells = <1>;
  80                         #size-cells = <1>;
  81
  82                         partition@0 {
  83                                 label = "u-boot";
  84                                 reg = <0x0 0x30000>;
  85                                 read-only;
  86                         };
  87
  88                         partition@30000 {
  89                                 label = "hw_panic";
  90                                 reg = <0x30000 0x10000>;
  91                                 read-only;
  92                         };
  93
  94                         factory: partition@40000 {
  95                                 label = "factory";
  96                                 reg = <0x40000 0x10000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@50000 {
 101                                 label = "firmware";
 102                                 reg = <0x50000 0xf70000>;
 103                         };
 104
 105                         partition@fc0000 {
 106                                 label = "oem";
 107                                 reg = <0xfc0000 0x20000>;
 108                                 read-only;
 109                         };
 110
 111                         bdinfo: partition@fe0000 {
 112                                 label = "bdinfo";
 113                                 reg = <0xfe0000 0x10000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@ff0000 {
 118                                 label = "backup";
 119                                 reg = <0xff0000 0x10000>;
 120                                 read-only;
 121                         };
 122                 };
 123         };
 124 };
 125
 126 &ethernet {
 127         mtd-mac-address = <&factory 0x4>;
 128         mediatek,portmap = "wllll";
 129 };
 130
 131 &wmac {
 132         status = "okay";
 133 };