ramips: set usb led trigger via devicetree
[oweals/openwrt.git] / target / linux / ramips / dts / FREESTATION5.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
10         model = "ARC FreeStation5";
11
12         chosen {
13                 bootargs = "console=ttyS0,115200";
14         };
15
16         cfi@1f000000 {
17                 compatible = "cfi-flash";
18                 reg = <0x1f000000 0x800000>;
19                 bank-width = <2>;
20                 device-width = <2>;
21
22                 partitions {
23                         compatible = "fixed-partitions";
24                         #address-cells = <1>;
25                         #size-cells = <1>;
26
27                         partition@0 {
28                                 label = "u-boot";
29                                 reg = <0x0 0x30000>;
30                                 read-only;
31                         };
32
33                         partition@30000 {
34                                 label = "u-boot-env";
35                                 reg = <0x30000 0x10000>;
36                                 read-only;
37                         };
38
39                         factory: partition@40000 {
40                                 label = "factory";
41                                 reg = <0x40000 0x10000>;
42                                 read-only;
43                         };
44
45                         partition@50000 {
46                                 label = "firmware";
47                                 reg = <0x50000 0x7b0000>;
48                         };
49                 };
50         };
51
52         gpio-export {
53                 compatible = "gpio-export";
54
55                 /*
56                  * Used to enable power-over-ethernet passthrough from port0 to port1.
57                  * Disable passthrough by default to prevent accidental equipment damage.
58                  */
59                 poe {
60                         gpio-export,name = "poe-passthrough";
61                         gpio-export,output = <1>;
62                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
63                 };
64         };
65
66         gpio-leds {
67                 compatible = "gpio-leds";
68
69                 /*
70                  * The following leds are defined in the ArcOS firmware, but reportedly
71                  * not present in the Freestation5 device.
72                  */
73                 wifi {
74                         label = "freestation5:unknown:wifi";
75                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
76                 };
77
78                 powerg {
79                         label = "freestation5:unknown:powerg";
80                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
81                 };
82
83                 usb {
84                         label = "freestation5:unknown:usb";
85                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
86                 };
87         };
88 };
89
90 &pinctrl {
91         state_default: pinctrl0 {
92                 gpio {
93                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
94                         ralink,function = "gpio";
95                 };
96         };
97 };
98
99 &ethernet {
100         mtd-mac-address = <&factory 0x4>;
101 };
102
103 &esw {
104         mediatek,portmap = <0x01>;
105 };
106
107 &wmac {
108         ralink,mtd-eeprom = <&factory 0>;
109 };
110
111 &otg {
112         status = "okay";
113 };