ramips: Add support for the NixCore X1 Module
[librecmc/librecmc.git] / target / linux / ramips / dts / F7C027.dts
1 /dts-v1/;
2
3 #include "rt5350.dtsi"
4
5 / {
6         compatible = "F7C027", "ralink,rt5350-soc";
7         model = "Belkin F7C027";
8
9         gpio-leds {
10                 compatible = "gpio-leds";
11
12                 status {
13                         label = "f7c027:blue:status";
14                         gpios = <&gpio0 7 1>;
15                 };
16
17                 power {
18                         label = "f7c027:blue:power";
19                         gpios = <&gpio0 9 1>;
20                 };
21
22                 orange {
23                         label = "f7c027:orange:status";
24                         gpios = <&gpio0 11 1>;
25                 };
26
27                 relay {
28                         label = "f7c027:device:relay";
29                         gpios = <&gpio0 13 0>;
30                 };
31         };
32
33         gpio-keys-polled {
34                 compatible = "gpio-keys-polled";
35                 #address-cells = <1>;
36                 #size-cells = <0>;
37                 poll-interval = <20>;
38
39                 top {
40                         label = "top";
41                         gpios = <&gpio0 10 1>;
42                         linux,code = <0x198>;
43                 };
44
45                 power {
46                         label = "power";
47                         gpios = <&gpio0 12 1>;
48                         linux,code = <0x100>;
49                 };
50
51                 sensor {
52                         label = "sensor";
53                         gpios = <&gpio0 14 1>;
54                         linux,code = <0x101>;
55                 };
56         };
57 };
58
59 &spi0 {
60         status = "okay";
61
62         m25p80@0 {
63                 #address-cells = <1>;
64                 #size-cells = <1>;
65                 compatible = "jedec,spi-nor";
66                 reg = <0>;
67                 linux,modalias = "m25p80", "mx25l12805d";
68                 spi-max-frequency = <10000000>;
69
70                 partition@0 {
71                         label = "u-boot";
72                         reg = <0x0 0x30000>;
73                         read-only;
74                 };
75
76                 partition@30000 {
77                         label = "u-boot-env";
78                         reg = <0x30000 0x10000>;
79                         read-only;
80                 };
81
82                 factory: partition@40000 {
83                         label = "factory";
84                         reg = <0x40000 0x10000>;
85                         read-only;
86                 };
87
88                 partition@50000 {
89                         label = "firmware";
90                         reg = <0x50000 0x770000>;
91                 };
92
93                 partition@7c0000 {
94                         label = "firmware2";
95                         reg = <0x7c0000 0x770000>;
96                 };
97
98                 partition@f30000 {
99                         label = "belkin_settings";
100                         reg = <0xf30000 0xa0000>;
101                 };
102
103                 partition@fd0000 {
104                         label = "unknown";
105                         reg = <0xfd0000 0x10000>;
106                 };
107
108                 partition@fe0000 {
109                         label = "nvram";
110                         reg = <0xfe0000 0x10000>;
111                 };
112
113                 partition@ff0000 {
114                         label = "user_factory";
115                         reg = <0xff0000 0x10000>;
116                 };
117         };
118 };
119
120 &wmac {
121         ralink,mtd-eeprom = <&factory 0>;
122 };
123
124 &pinctrl {
125         state_default: pinctrl0 {
126                 gpio {
127                         ralink,group = "i2c", "jtag", "uartf";
128                         ralink,function = "gpio";
129                 };
130         };
131 };