target/linux/ramips/dts/F7C027.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "belkin,f7c027", "ralink,rt5350-soc";
  10         model = "Belkin F7C027";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 status {
  16                         label = "f7c027:blue:status";
  17                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 power {
  21                         label = "f7c027:blue:power";
  22                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 orange {
  26                         label = "f7c027:orange:status";
  27                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 relay {
  31                         label = "f7c027:device:relay";
  32                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  33                 };
  34         };
  35
  36         gpio-keys-polled {
  37                 compatible = "gpio-keys-polled";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40                 poll-interval = <20>;
  41
  42                 top {
  43                         label = "restore";
  44                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_RESTART>;
  46                 };
  47
  48                 power {
  49                         label = "power";
  50                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RFKILL>;
  52                 };
  53
  54                 sensor {
  55                         label = "sensor";
  56                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  57                         linux,code = <BTN_0>;
  58                 };
  59         };
  60 };
  61
  62 &spi0 {
  63         status = "okay";
  64
  65         m25p80@0 {
  66                 #address-cells = <1>;
  67                 #size-cells = <1>;
  68                 compatible = "jedec,spi-nor";
  69                 reg = <0>;
  70                 spi-max-frequency = <10000000>;
  71
  72                 partition@0 {
  73                         label = "u-boot";
  74                         reg = <0x0 0x30000>;
  75                         read-only;
  76                 };
  77
  78                 partition@30000 {
  79                         label = "u-boot-env";
  80                         reg = <0x30000 0x10000>;
  81                         read-only;
  82                 };
  83
  84                 factory: partition@40000 {
  85                         label = "factory";
  86                         reg = <0x40000 0x10000>;
  87                         read-only;
  88                 };
  89
  90                 partition@50000 {
  91                         label = "firmware";
  92                         reg = <0x50000 0x770000>;
  93                 };
  94
  95                 partition@7c0000 {
  96                         label = "firmware2";
  97                         reg = <0x7c0000 0x770000>;
  98                 };
  99
 100                 partition@f30000 {
 101                         label = "belkin_settings";
 102                         reg = <0xf30000 0xa0000>;
 103                 };
 104
 105                 partition@fd0000 {
 106                         label = "unknown";
 107                         reg = <0xfd0000 0x10000>;
 108                 };
 109
 110                 partition@fe0000 {
 111                         label = "nvram";
 112                         reg = <0xfe0000 0x10000>;
 113                 };
 114
 115                 partition@ff0000 {
 116                         label = "user_factory";
 117                         reg = <0xff0000 0x10000>;
 118                 };
 119         };
 120 };
 121
 122 &wmac {
 123         ralink,mtd-eeprom = <&factory 0>;
 124 };
 125
 126 &pinctrl {
 127         state_default: pinctrl0 {
 128                 gpio {
 129                         ralink,group = "i2c", "jtag", "uartf";
 130                         ralink,function = "gpio";
 131                 };
 132         };
 133 };