target/linux/ramips/dts/F5D8235_V2.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
  10         model = "Belkin F5D8235 v2";
  11
  12         cfi@1f000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1f000000 0x800000>;
  15                 bank-width = <2>;
  16                 device-width = <2>;
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19
  20                 uboot: partition@0 {
  21                         label = "uboot";
  22                         reg = <0x0 0x50000>;
  23                         read-only;
  24                 };
  25
  26                 partition@50000 {
  27                         label = "firmware";
  28                         reg = <0x50000 0x790000>;
  29                 };
  30
  31                 partition@7e0000 {
  32                         label = "nvram";
  33                         reg = <0x7e0000 0x10000>;
  34                 };
  35
  36                 factory: partition@7f0000 {
  37                         label = "factory";
  38                         reg = <0x7f0000 0x10000>;
  39                 };
  40         };
  41
  42         rtl8366rb {
  43                 compatible = "realtek,rtl8366rb";
  44                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  45                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50
  51                 internet {
  52                         label = "f5d8235-v2:blue:internet";
  53                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 internet2 {
  57                         label = "f5d8235-v2:amber:internet";
  58                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 modem {
  62                         label = "f5d8235-v2:blue:modem";
  63                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 modem2 {
  67                         label = "f5d8235-v2:amber:modem";
  68                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 router {
  72                         label = "f5d8235-v2:blue:router";
  73                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 storage {
  77                         label = "f5d8235-v2:blue:storage";
  78                         gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 storage2 {
  82                         label = "f5d8235-v2:amber:storage";
  83                         gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 security {
  87                         label = "f5d8235-v2:blue:security";
  88                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  89                 };
  90
  91                 security2 {
  92                         label = "f5d8235-v2:amber:security";
  93                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  94                 };
  95         };
  96 };
  97
  98 &pinctrl {
  99         state_default: pinctrl0 {
 100                 gpio {
 101                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 102                         ralink,function = "gpio";
 103                 };
 104         };
 105 };
 106
 107 &ethernet {
 108         mtd-mac-address = <&uboot 0x40004>;
 109 };
 110
 111 &esw {
 112         mediatek,portmap = <0x3f>;
 113 };
 114
 115 &wmac {
 116         ralink,mtd-eeprom = <&uboot 0x40000>;
 117 };
 118
 119 &otg {
 120         status = "okay";
 121 };