5 #include <dt-bindings/input/input.h>
8 compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
9 model = "D-Link DIR-860L B1";
12 device_type = "memory";
13 reg = <0x0 0x8000000>;
17 bootargs = "console=ttyS0,57600";
21 compatible = "gpio-leds";
24 label = "dir-860l-b1:orange:power";
25 gpios = <&gpio0 13 1>;
29 label = "dir-860l-b1:green:power";
30 gpios = <&gpio0 15 1>;
34 label = "dir-860l-b1:orange:net";
35 gpios = <&gpio0 14 1>;
39 label = "dir-860l-b1:green:net";
40 gpios = <&gpio0 16 1>;
45 compatible = "gpio-keys-polled";
53 linux,code = <KEY_RESTART>;
58 gpios = <&gpio0 18 1>;
59 linux,code = <KEY_WPS_BUTTON>;
70 compatible = "jedec,spi-nor";
72 linux,modalias = "m25p80";
73 spi-max-frequency = <10000000>;
83 reg = <0x30000 0x4000>;
87 radio: partition@34000 {
89 reg = <0x34000 0x4000>;
93 factory: partition@38000 {
95 reg = <0x38000 0x8000>;
101 reg = <0x40000 0x10000>;
107 reg = <0x50000 0xfb0000>;
117 reg = <0x0000 0 0 0 0>;
119 mediatek,mtd-eeprom = <&radio 0x2000>;
126 reg = <0x0000 0 0 0 0>;
128 mediatek,mtd-eeprom = <&radio 0>;
135 state_default: pinctrl0 {
137 ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
138 ralink,function = "gpio";