target/linux/ramips/dts/DIR-810L.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
   9         model = "D-Link DIR-810L";
  10
  11         gpio-keys-polled {
  12                 compatible = "gpio-keys-polled";
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15                 poll-interval = <20>;
  16
  17                 reset {
  18                         label = "reset";
  19                         gpios = <&gpio0 1 1>;
  20                         linux,code = <BTN_0>;
  21                 };
  22
  23                 wps {
  24                         label = "wps";
  25                         gpios = <&gpio0 2 1>;
  26                         linux,code = <BTN_0>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 power {
  34                         label = "dir-810l:green:power";
  35                         gpios = <&gpio0 9 0>;
  36                 };
  37
  38                 wan {
  39                         label = "dir-810l:orange:wan";
  40                         gpios = <&gpio0 12 0>;
  41                 };
  42
  43                 status {
  44                         label = "dir-810l:orange:power";
  45                         gpios = <&gpio0 13 0>;
  46                 };
  47         };
  48 };
  49
  50 &spi0 {
  51         status = "okay";
  52
  53         m25p80@0 {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 compatible = "jedec,spi-nor";
  57                 reg = <0>;
  58                 spi-max-frequency = <10000000>;
  59
  60                 partition@0 {
  61                         label = "u-boot";
  62                         reg = <0x0 0x30000>;
  63                         read-only;
  64                 };
  65
  66                 partition@30000 {
  67                         label = "u-boot-env";
  68                         reg = <0x30000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 factory: partition@40000 {
  73                         label = "factory";
  74                         reg = <0x40000 0x10000>;
  75                         read-only;
  76                 };
  77
  78                 factory5g: partition@50000 {
  79                         label = "factory5g";
  80                         reg = <0x50000 0x10000>;
  81                         read-only;
  82                 };
  83
  84                 partition@60000 {
  85                         label = "Wolf_Config";
  86                         reg = <0x60000 0x10000>;
  87                         read-only;
  88                 };
  89
  90                 partition@70000 {
  91                         label = "MyDlink";
  92                         reg = <0x70000 0x80000>;
  93                         read-only;
  94                 };
  95
  96                 partition@e0000 {
  97                         label = "Jffs2";
  98                         reg = <0xe0000 0x80000>;
  99                         read-only;
 100                 };
 101
 102                 partition@170000 {
 103                         label = "firmware";
 104                         reg = <0x170000 0x690000>;
 105                 };
 106         };
 107 };
 108
 109 &pinctrl {
 110         state_default: pinctrl0 {
 111                 gpio {
 112                         ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
 113                         ralink,function = "gpio";
 114                 };
 115         };
 116 };
 117
 118 &ethernet {
 119         mtd-mac-address = <&factory 0x28>;
 120         mediatek,portmap = "llllw";
 121 };
 122
 123 &gsw {
 124         mediatek,port4 = "ephy";
 125         pinctrl-names = "default";
 126         pinctrl-0 = <&ephy_pins>;
 127 };
 128
 129 &pcie {
 130         status = "okay";
 131 };
 132
 133 &wmac {
 134         ralink,mtd-eeprom = <&factory 0>;
 135 };