target/linux/ramips/dts/DIR-620-D1.dts

   1 /dts-v1/;
   2
   3 #include "rt3352.dtsi"
   4
   5 / {
   6         compatible = "DIR-620-D1", "ralink,rt3352-soc";
   7         model = "D-Link DIR-620 D1";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 status {
  13                         label = "dir-620-d1:green:status";
  14                         gpios = <&gpio0 9 1>;
  15                 };
  16
  17                 wifi {
  18                         label = "dir-620-d1:green:wifi";
  19                         gpios = <&gpio0 17 1>;
  20                 };
  21         };
  22
  23         gpio-keys-polled {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 reset_wps {
  30                         label = "reset_wps";
  31                         gpios = <&gpio0 7 1>;
  32                         linux,code = <0x198>;
  33                 };
  34         };
  35 };
  36
  37 &spi0 {
  38         status = "okay";
  39
  40         m25p80@0 {
  41                 #address-cells = <1>;
  42                 #size-cells = <1>;
  43                 compatible = "jedec,spi-nor";
  44                 reg = <0>;
  45                 linux,modalias = "m25p80", "mx25l6405d";
  46                 spi-max-frequency = <10000000>;
  47
  48                 partition@0 {
  49                         label = "u-boot";
  50                         reg = <0x0 0x30000>;
  51                         read-only;
  52                 };
  53
  54                 partition@30000 {
  55                         label = "u-boot-env";
  56                         reg = <0x30000 0x10000>;
  57                         read-only;
  58                 };
  59
  60                 factory: partition@40000 {
  61                         label = "factory";
  62                         reg = <0x40000 0x10000>;
  63                         read-only;
  64                 };
  65
  66                 partition@50000 {
  67                         label = "firmware";
  68                         reg = <0x50000 0x7b0000>;
  69                 };
  70         };
  71 };
  72
  73 &pinctrl {
  74         state_default: pinctrl0 {
  75                 gpio {
  76                         ralink,group = "i2c", "jtag", "uartf";
  77                         ralink,function = "gpio";
  78                 };
  79
  80                 rgmii {
  81                         ralink,group = "rgmii";
  82                         ralink,function = "rgmii";
  83                 };
  84
  85                 mdio {
  86                         ralink,group = "mdio";
  87                         ralink,function = "mdio";
  88                 };
  89         };
  90 };
  91
  92 &ethernet {
  93         mtd-mac-address = <&factory 0x4>;
  94 };
  95
  96 &esw {
  97         mediatek,portmap = <0x2f>;
  98 };
  99
 100 &wmac {
 101         ralink,mtd-eeprom = <&factory 0>;
 102 };
 103
 104 &ehci {
 105         status = "okay";
 106 };
 107
 108 &ohci {
 109         status = "okay";
 110 };