target/linux/ramips/dts/DIR-615-H1.dts

   1 /dts-v1/;
   2
   3 #include "rt3352.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-615-h1", "ralink,rt3352-soc";
  10         model = "D-Link DIR-615 H1";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 status {
  16                         label = "dir-615-h1:amber:status";
  17                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  18                 };
  19
  20                 status2 {
  21                         label = "dir-615-h1:green:status";
  22                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  23                 };
  24
  25                 wan {
  26                         label = "dir-615-h1:amber:wan";
  27                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 wan2 {
  31                         label = "dir-615-h1:green:wan";
  32                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wps {
  36                         label = "dir-615-h1:blue:wps";
  37                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  38                 };
  39         };
  40
  41         gpio-keys-polled {
  42                 compatible = "gpio-keys-polled";
  43                 #address-cells = <1>;
  44                 #size-cells = <0>;
  45                 poll-interval = <20>;
  46
  47                 reset {
  48                         label = "reset";
  49                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52
  53                 wps {
  54                         label = "wps";
  55                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  56                         linux,code = <KEY_WPS_BUTTON>;
  57                 };
  58         };
  59 };
  60
  61 &spi0 {
  62         status = "okay";
  63
  64         m25p80@0 {
  65                 #address-cells = <1>;
  66                 #size-cells = <1>;
  67                 compatible = "jedec,spi-nor";
  68                 reg = <0>;
  69                 spi-max-frequency = <10000000>;
  70
  71                 partition@0 {
  72                         label = "u-boot";
  73                         reg = <0x0 0x30000>;
  74                         read-only;
  75                 };
  76
  77                 partition@30000 {
  78                         label = "u-boot-env";
  79                         reg = <0x30000 0x10000>;
  80                         read-only;
  81                 };
  82
  83                 factory: partition@40000 {
  84                         label = "factory";
  85                         reg = <0x40000 0x10000>;
  86                         read-only;
  87                 };
  88
  89                 partition@50000 {
  90                         label = "firmware";
  91                         reg = <0x50000 0x3b0000>;
  92                 };
  93         };
  94 };
  95
  96 &pinctrl {
  97         state_default: pinctrl0 {
  98                 gpio {
  99                         ralink,group = "i2c", "jtag", "uartf";
 100                         ralink,function = "gpio";
 101                 };
 102         };
 103 };
 104
 105 &ethernet {
 106         mtd-mac-address = <&factory 0x28>;
 107         pinctrl-names = "default";
 108         pinctrl-0 = <&rgmii_pins &mdio_pins>;
 109 };
 110
 111 &esw {
 112         mediatek,portmap = <0x2f>;
 113 };
 114
 115 &wmac {
 116         ralink,mtd-eeprom = <&factory 0>;
 117 };