target/linux/ramips/dts/DIR-615-H1.dts

   1 /dts-v1/;
   2
   3 #include "rt3352.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-615-h1", "ralink,rt3352-soc";
  10         model = "D-Link DIR-615 H1";
  11
  12         aliases {
  13                 led-boot = &led_status_green;
  14                 led-failsafe = &led_status_green;
  15                 led-running = &led_status_green;
  16                 led-upgrade = &led_status_green;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 status {
  23                         label = "dir-615-h1:amber:status";
  24                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  25                 };
  26
  27                 led_status_green: status2 {
  28                         label = "dir-615-h1:green:status";
  29                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  30                         default-state = "on";
  31                 };
  32
  33                 wan {
  34                         label = "dir-615-h1:amber:wan";
  35                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 wan2 {
  39                         label = "dir-615-h1:green:wan";
  40                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 wps {
  44                         label = "dir-615-h1:blue:wps";
  45                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  46                 };
  47         };
  48
  49         keys {
  50                 compatible = "gpio-keys-polled";
  51                 poll-interval = <20>;
  52
  53                 reset {
  54                         label = "reset";
  55                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  56                         linux,code = <KEY_RESTART>;
  57                 };
  58
  59                 wps {
  60                         label = "wps";
  61                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  62                         linux,code = <KEY_WPS_BUTTON>;
  63                 };
  64         };
  65 };
  66
  67 &spi0 {
  68         status = "okay";
  69
  70         m25p80@0 {
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 spi-max-frequency = <10000000>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 label = "u-boot";
  82                                 reg = <0x0 0x30000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@30000 {
  87                                 label = "u-boot-env";
  88                                 reg = <0x30000 0x10000>;
  89                                 read-only;
  90                         };
  91
  92                         factory: partition@40000 {
  93                                 label = "factory";
  94                                 reg = <0x40000 0x10000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@50000 {
  99                                 compatible = "denx,uimage";
 100                                 label = "firmware";
 101                                 reg = <0x50000 0x3b0000>;
 102                         };
 103                 };
 104         };
 105 };
 106
 107 &pinctrl {
 108         state_default: pinctrl0 {
 109                 gpio {
 110                         ralink,group = "i2c", "jtag", "uartf";
 111                         ralink,function = "gpio";
 112                 };
 113         };
 114 };
 115
 116 &ethernet {
 117         mtd-mac-address = <&factory 0x28>;
 118         pinctrl-names = "default";
 119         pinctrl-0 = <&rgmii_pins &mdio_pins>;
 120 };
 121
 122 &esw {
 123         mediatek,portmap = <0x2f>;
 124 };
 125
 126 &wmac {
 127         ralink,mtd-eeprom = <&factory 0>;
 128 };