target/linux/ramips/dts/DIR-610-A1.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "DIR-610-A1", "ralink,rt5350-soc";
   9         model = "D-Link DIR-610 A1";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 status {
  15                         label = "dir-610-a1:green:status";
  16                         gpios = <&gpio0 9 1>;
  17                 };
  18
  19                 wps {
  20                         label = "dir-610-a1:green:wps";
  21                         gpios = <&gpio0 13 1>;
  22                 };
  23         };
  24
  25         gpio-keys-polled {
  26                 compatible = "gpio-keys-polled";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29                 poll-interval = <20>;
  30
  31                 reset {
  32                         label = "reset";
  33                         gpios = <&gpio0 10 1>;
  34                         linux,code = <KEY_RESTART>;
  35                 };
  36
  37                 wps {
  38                         label = "wps";
  39                         gpios = <&gpio0 0 1>;
  40                         linux,code = <KEY_WPS_BUTTON>;
  41                 };
  42         };
  43 };
  44
  45 &spi0 {
  46         status = "okay";
  47
  48         m25p80@0 {
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 spi-max-frequency = <10000000>;
  54
  55                 partition@0 {
  56                         label = "u-boot";
  57                         reg = <0x0 0x30000>;
  58                         read-only;
  59                 };
  60
  61                 devdata: partition@30000 {
  62                         label = "devdata";
  63                         reg = <0x30000 0x10000>;
  64                         read-only;
  65                 };
  66
  67                 factory: partition@40000 {
  68                         label = "factory";
  69                         reg = <0x40000 0x10000>;
  70                         read-only;
  71                 };
  72
  73                 partition@50000 {
  74                         label = "firmware";
  75                         reg = <0x50000 0x3b0000>;
  76                 };
  77         };
  78 };
  79
  80 &pinctrl {
  81         state_default: pinctrl0 {
  82                 gpio {
  83                         ralink,group = "i2c", "jtag", "uartf";
  84                         ralink,function = "gpio";
  85                 };
  86         };
  87 };
  88
  89 &ethernet {
  90         mtd-mac-address = <&devdata 0x4004>;
  91 };
  92
  93 &esw {
  94         status = "okay";
  95         mediatek,portmap = <0x2f>;
  96         mediatek,led_polarity = <0x17>;
  97 };
  98
  99 &wmac {
 100         status = "okay";
 101         ralink,led-polarity = <1>;
 102         ralink,mtd-eeprom = <&devdata 0x4000>;
 103 };