target/linux/ramips/dts/DIR-600-B1.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DIR-600-B1", "ralink,rt3050-soc";
   7         model = "D-Link DIR-600 B1";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "u-boot";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31
  32                 devdata: partition@30000 {
  33                         label = "devdata";
  34                         reg = <0x30000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 factory: partition@40000 {
  39                         label = "devconf";
  40                         reg = <0x40000 0x10000>;
  41                         read-only;
  42                 };
  43
  44                 partition@50000 {
  45                         label = "firmware";
  46                         reg = <0x50000 0x3b0000>;
  47                 };
  48         };
  49
  50         ethernet@10100000 {
  51                 mtd-mac-address = <&devdata 0x4004>;
  52         };
  53
  54         esw@10110000 {
  55                 mediatek,portmap = <0x2f>;
  56         };
  57
  58         wmac@10180000 {
  59                 ralink,mtd-eeprom = <&devdata 0x4000>;
  60         };
  61
  62         gpio-keys-polled {
  63                 compatible = "gpio-keys-polled";
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66                 poll-interval = <20>;
  67
  68                 reset {
  69                         label = "reset";
  70                         gpios = <&gpio0 10 1>;
  71                         linux,code = <0x198>;
  72                 };
  73
  74                 wps {
  75                         label = "wps";
  76                         gpios = <&gpio0 0 1>;
  77                         linux,code = <0x211>;
  78                 };
  79         };
  80
  81         gpio-leds {
  82                 compatible = "gpio-leds";
  83
  84                 status {
  85                         label = "dir-600-b1:amber:status";
  86                         gpios = <&gpio0 8 1>;
  87                 };
  88
  89                 status2 {
  90                         label = "dir-600-b1:green:status";
  91                         gpios = <&gpio0 9 1>;
  92                 };
  93
  94                 wan {
  95                         label = "dir-600-b1:amber:wan";
  96                         gpios = <&gpio0 14 1>;
  97                 };
  98
  99                 wan2 {
 100                         label = "dir-600-b1:green:wan";
 101                         gpios = <&gpio0 12 1>;
 102                 };
 103
 104                 wps {
 105                         label = "dir-600-b1:blue:wps";
 106                         gpios = <&gpio0 13 1>;
 107                 };
 108         };
 109 };