target/linux/ramips/dts/DIR-510L.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7620a.dtsi"
   5
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/gpio/gpio.h>
   8
   9 / {
  10         compatible = "dlink,dir-510l", "ralink,mt7620a-soc";
  11         model = "D-Link DIR-510L";
  12
  13         aliases {
  14                 led-boot = &led_status;
  15                 led-failsafe = &led_status;
  16                 led-running = &led_status;
  17                 led-upgrade = &led_status;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS1,57600";
  22         };
  23
  24         keys {
  25                 compatible = "gpio-keys-polled";
  26                 poll-interval = <20>;
  27
  28                 reset {
  29                         label = "reset";
  30                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  31                         linux,code = <KEY_RESTART>;
  32                 };
  33
  34                 wps {
  35                         label = "wps";
  36                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                 };
  39         };
  40
  41         leds {
  42                 compatible = "gpio-leds";
  43
  44                 led_status: status {
  45                         label = "dir-510l:green:status";
  46                         gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
  47                 };
  48
  49                 status-red {
  50                         label = "dir-510l:red:status";
  51                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  52                 };
  53
  54         };
  55 };
  56
  57 &ethernet {
  58         mediatek,portmap = "llllw";
  59 };
  60
  61 &uart {
  62         status = "okay";
  63 };
  64
  65 &gpio0 {
  66         status = "okay";
  67 };
  68
  69 &spi0 {
  70         status = "okay";
  71
  72         flash@0 {
  73                 compatible = "jedec,spi-nor";
  74                 reg = <0>;
  75                 spi-max-frequency = <50000000>;
  76
  77                 partitions {
  78                         compatible = "fixed-partitions";
  79                         #address-cells = <1>;
  80                         #size-cells = <1>;
  81
  82                         partition@0 {
  83                                 label = "jboot";
  84                                 reg = <0x0 0x10000>;
  85                                 read-only;
  86                         };
  87
  88                         partition@10000 {
  89                                 label = "recovery";
  90                                 reg = <0x10000 0x200000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@210000 {
  95                                 compatible = "amit,jimage";
  96                                 label = "firmware";
  97                                 reg = <0x210000 0xde0000>;
  98                         };
  99
 100                         config: partition@ff0000 {
 101                                 label = "config";
 102                                 reg = <0xff0000 0x10000>;
 103                                 read-only;
 104                         };
 105                 };
 106         };
 107 };
 108
 109 &ehci {
 110         status = "okay";
 111 };
 112
 113 &ohci {
 114         status = "okay";
 115 };
 116
 117 &pcie {
 118         status = "okay";
 119 };
 120
 121 &pcie0 {
 122         mt76x0e@0,0 {
 123                 reg = <0x0000 0 0 0 0>;
 124                 mtd-mac-address = <&config 0xe490>;
 125                 mtd-mac-address-increment = <(2)>;
 126                 mediatek,mtd-eeprom = <&config 0xe05d>;
 127         };
 128 };
 129
 130 &gsw {
 131         mediatek,port4 = "ephy";
 132 };
 133
 134 &pinctrl {
 135         state_default: pinctrl0 {
 136                 default {
 137                         ralink,group = "i2c", "uartf";
 138                         ralink,function = "gpio";
 139                 };
 140         };
 141 };
 142