target/linux/ramips/dts/DB-WRT01.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-soc";
   9         model = "Planex DB-WRT01";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 power {
  15                         label = "db-wrt01:orange:power";
  16                         gpios = <&gpio1 1 1>;
  17                 };
  18         };
  19
  20         gpio-keys-polled {
  21                 compatible = "gpio-keys-polled";
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24                 poll-interval = <20>;
  25
  26                 s1 {
  27                         label = "wps";
  28                         gpios = <&gpio0 2 1>;
  29                         linux,code = <KEY_WPS_BUTTON>;
  30                 };
  31         };
  32 };
  33
  34 &gpio1 {
  35         status = "okay";
  36 };
  37
  38 &spi0 {
  39         status = "okay";
  40
  41         m25p80@0 {
  42                 #address-cells = <1>;
  43                 #size-cells = <1>;
  44                 compatible = "jedec,spi-nor";
  45                 reg = <0>;
  46                 spi-max-frequency = <10000000>;
  47
  48                 partition@0 {
  49                         label = "u-boot";
  50                         reg = <0x0 0x30000>;
  51                         read-only;
  52                 };
  53
  54                 partition@30000 {
  55                         label = "u-boot-env";
  56                         reg = <0x30000 0x10000>;
  57                         read-only;
  58                 };
  59
  60                 factory: partition@40000 {
  61                         label = "factory";
  62                         reg = <0x40000 0x10000>;
  63                         read-only;
  64                 };
  65
  66                 partition@50000 {
  67                         label = "firmware";
  68                         reg = <0x50000 0x7b0000>;
  69                 };
  70         };
  71 };
  72
  73 &pinctrl {
  74         state_default: pinctrl0 {
  75                 gpio {
  76                         ralink,group = "i2c", "spi refclk", "rgmii1";
  77                         ralink,function = "gpio";
  78                 };
  79         };
  80 };
  81
  82 &ethernet {
  83         pinctrl-names = "default";
  84         pinctrl-0 = <&ephy_pins>;
  85         mtd-mac-address = <&factory 0x4>;
  86         mediatek,portmap = "llllw";
  87 };
  88
  89 &gsw {
  90         mediatek,port4 = "ephy";
  91 };
  92
  93 &wmac {
  94         ralink,mtd-eeprom = <&factory 0>;
  95 };
  96
  97 &pcie {
  98         status = "okay";
  99 };