target/linux/ramips/dts/CY-SWR1100.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "samsung,cy-swr1100", "ralink,rt3883-soc";
  10         model = "Samsung CY-SWR1100";
  11
  12         nor-flash@1c000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1c000000 0x800000>;
  15                 bank-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "uboot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "uboot-env";
  27                         reg = <0x30000 0x4000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@34000 {
  32                         label = "factory";
  33                         reg = <0x34000 0x4000>;
  34                         read-only;
  35                 };
  36
  37                 partition@38000 {
  38                         label = "nvram";
  39                         reg = <0x38000 0x8000>;
  40                         read-only;
  41                 };
  42
  43                 partition@40000 {
  44                         label = "devdata";
  45                         reg = <0x40000 0x10000>;
  46                 };
  47
  48                 partition@50000 {
  49                         label = "firmware";
  50                         reg = <0x50000 0x7b0000>;
  51                 };
  52         };
  53
  54         rtl8367 {
  55                 compatible = "realtek,rtl8367";
  56                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  57                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  58                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
  59         };
  60
  61         gpio-keys-polled {
  62                 compatible = "gpio-keys-polled";
  63                 #address-cells = <1>;
  64                 #size-cells = <0>;
  65                 poll-interval = <100>;
  66
  67                 reset {
  68                         label = "reset";
  69                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
  70                         linux,code = <KEY_RESTART>;
  71                 };
  72
  73                 wps {
  74                         label = "wps";
  75                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  76                         linux,code = <KEY_WPS_BUTTON>;
  77                 };
  78         };
  79
  80         gpio-leds {
  81                 compatible = "gpio-leds";
  82
  83                 wps {
  84                         label = "cy-swr1100:blue:wps";
  85                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  86                 };
  87
  88                 usb {
  89                         label = "cy-swr1100:blue:usb";
  90                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  91                 };
  92         };
  93 };
  94
  95 &gpio1 {
  96         status = "okay";
  97 };
  98
  99 &pinctrl {
 100         state_default: pinctrl0 {
 101                 gpio {
 102                         ralink,group = "i2c", "spi";
 103                         ralink,function = "gpio";
 104                 };
 105         };
 106 };
 107
 108 &ethernet {
 109         port@0 {
 110                 mediatek,fixed-link = <1000 1 1 1>;
 111                 phy-mode = "rgmii";
 112         };
 113 };
 114
 115 &pci {
 116         status = "okay";
 117         pinctrl-names = "default";
 118         pinctrl-0 = <&pci_pins>;
 119
 120         pci_pins: pci {
 121                 pci {
 122                         ralink,group = "pci";
 123                         ralink,function = "pci-fnc";
 124                 };
 125         };
 126
 127         host-bridge {
 128                 pci-bridge@1 {
 129                         status = "okay";
 130
 131                         wifi@0,0 {
 132                                 compatible = "pci0,0";
 133                                 reg = <0x10000 0 0 0 0>;
 134                                 ralink,5ghz = <0>;
 135                                 ralink,mtd-eeprom = <&factory 0x2000>;
 136                         };
 137                 };
 138         };
 139 };
 140
 141 &wmac {
 142         status = "okay";
 143         ralink,2ghz = <0>;
 144         ralink,mtd-eeprom = <&factory 0>;
 145 };
 146
 147 &ehci {
 148         status = "okay";
 149 };
 150
 151 &ohci {
 152         status = "okay";
 153 };