target/linux/ramips/dts/CS-QR10.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Planex CS-QR10";
   8
   9         sound {
  10                 compatible = "mediatek,mt7620-audio-wm8960";
  11                 model = "mt7620-wm8960";
  12                 i2s-controller = <&i2s>;
  13                 audio-routing =
  14                         "Ext Spk", "SPK_LP",
  15                         "Ext Spk", "SPK_LN",
  16                         "Ext Spk", "SPK_RP",
  17                         "Ext Spk", "SPK_RN";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 power {
  24                         label = "cs-qr10:red:power";
  25                         gpios = <&gpio1 4 1>;
  26                 };
  27         };
  28
  29         gpio-keys-polled {
  30                 compatible = "gpio-keys-polled";
  31                 #address-cells = <1>;
  32                 #size-cells = <0>;
  33                 poll-interval = <20>;
  34
  35                 s1 {
  36                         label = "reset";
  37                         gpios = <&gpio1 1 1>;
  38                         linux,code = <0x198>;
  39                 };
  40
  41                 s2 {
  42                         label = "wps";
  43                         gpios = <&gpio1 3 1>;
  44                         linux,code = <0x211>;
  45                 };
  46         };
  47 };
  48
  49 &gpio0 {
  50         status = "okay";
  51 };
  52
  53 &gpio1 {
  54         status = "okay";
  55 };
  56
  57 &gpio2 {
  58         status = "okay";
  59 };
  60
  61 &gpio3 {
  62         status = "okay";
  63 };
  64
  65 &i2c {
  66         status = "okay";
  67 };
  68
  69 &i2s {
  70         status = "okay";
  71         pinctrl-names = "default";
  72         pinctrl-0 = <&pcm_i2s_pins>;
  73 };
  74
  75 &spi0 {
  76         status = "okay";
  77
  78         m25p80@0 {
  79                 #address-cells = <1>;
  80                 #size-cells = <1>;
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 linux,modalias = "m25p80", "mx25l6405d";
  84                 spi-max-frequency = <10000000>;
  85
  86                 partition@0 {
  87                         label = "u-boot";
  88                         reg = <0x0 0x30000>;
  89                         read-only;
  90                 };
  91
  92                 partition@30000 {
  93                         label = "u-boot-env";
  94                         reg = <0x30000 0x10000>;
  95                         read-only;
  96                 };
  97
  98                 factory: partition@40000 {
  99                         label = "factory";
 100                         reg = <0x40000 0x10000>;
 101                         read-only;
 102                 };
 103
 104                 partition@50000 {
 105                         label = "firmware";
 106                         reg = <0x50000 0x7b0000>;
 107                 };
 108         };
 109 };
 110
 111 &pcm {
 112         status = "okay";
 113 };
 114
 115 &gdma {
 116         status = "okay";
 117 };
 118
 119 &pinctrl {
 120         state_default: pinctrl0 {
 121                 gpio {
 122                         ralink,group = "spi refclk", "rgmii1";
 123                         ralink,function = "gpio";
 124                 };
 125                 wdt {
 126                         ralink,group = "wdt";
 127                         ralink,function = "wdt refclk";
 128                 };
 129         };
 130 };
 131
 132 &ethernet {
 133         pinctrl-names = "default";
 134         pinctrl-0 = <&ephy_pins>;
 135         mtd-mac-address = <&factory 0x4>;
 136         mediatek,portmap = "llllw";
 137 };
 138
 139 &gsw {
 140         ralink,port4 = "ephy";
 141 };
 142
 143 &sdhci {
 144         status = "okay";
 145 };
 146
 147 &ehci {
 148         status = "okay";
 149 };
 150
 151 &ohci {
 152         status = "okay";
 153 };
 154
 155 &wmac {
 156         ralink,mtd-eeprom = <&factory 0>;
 157 };
 158
 159 &pcie {
 160         status = "okay";
 161 };