target/linux/ramips/dts/CS-QR10.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-soc";
   9         model = "Planex CS-QR10";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 power {
  15                         label = "cs-qr10:red:power";
  16                         gpios = <&gpio1 4 1>;
  17                 };
  18         };
  19
  20         gpio-keys-polled {
  21                 compatible = "gpio-keys-polled";
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24                 poll-interval = <20>;
  25
  26                 s1 {
  27                         label = "reset";
  28                         gpios = <&gpio1 1 1>;
  29                         linux,code = <KEY_RESTART>;
  30                 };
  31
  32                 s2 {
  33                         label = "wps";
  34                         gpios = <&gpio1 3 1>;
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                 };
  37         };
  38 };
  39
  40 &gpio0 {
  41         status = "okay";
  42 };
  43
  44 &gpio1 {
  45         status = "okay";
  46 };
  47
  48 &gpio2 {
  49         status = "okay";
  50 };
  51
  52 &gpio3 {
  53         status = "okay";
  54 };
  55
  56 &i2c {
  57         status = "okay";
  58 };
  59
  60 &i2s {
  61         status = "okay";
  62         pinctrl-names = "default";
  63         pinctrl-0 = <&pcm_i2s_pins>;
  64 };
  65
  66 &spi0 {
  67         status = "okay";
  68
  69         m25p80@0 {
  70                 #address-cells = <1>;
  71                 #size-cells = <1>;
  72                 compatible = "jedec,spi-nor";
  73                 reg = <0>;
  74                 spi-max-frequency = <10000000>;
  75
  76                 partition@0 {
  77                         label = "u-boot";
  78                         reg = <0x0 0x30000>;
  79                         read-only;
  80                 };
  81
  82                 partition@30000 {
  83                         label = "u-boot-env";
  84                         reg = <0x30000 0x10000>;
  85                         read-only;
  86                 };
  87
  88                 factory: partition@40000 {
  89                         label = "factory";
  90                         reg = <0x40000 0x10000>;
  91                         read-only;
  92                 };
  93
  94                 partition@50000 {
  95                         label = "firmware";
  96                         reg = <0x50000 0x7b0000>;
  97                 };
  98         };
  99 };
 100
 101 &pcm {
 102         status = "okay";
 103 };
 104
 105 &gdma {
 106         status = "okay";
 107 };
 108
 109 &pinctrl {
 110         state_default: pinctrl0 {
 111                 gpio {
 112                         ralink,group = "spi refclk", "rgmii1";
 113                         ralink,function = "gpio";
 114                 };
 115                 wdt {
 116                         ralink,group = "wdt";
 117                         ralink,function = "wdt refclk";
 118                 };
 119         };
 120 };
 121
 122 &ethernet {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&ephy_pins>;
 125         mtd-mac-address = <&factory 0x4>;
 126         mediatek,portmap = "llllw";
 127 };
 128
 129 &gsw {
 130         ralink,port4 = "ephy";
 131 };
 132
 133 &sdhci {
 134         status = "okay";
 135 };
 136
 137 &ehci {
 138         status = "okay";
 139 };
 140
 141 &ohci {
 142         status = "okay";
 143 };
 144
 145 &wmac {
 146         ralink,mtd-eeprom = <&factory 0>;
 147 };
 148
 149 &pcie {
 150         status = "okay";
 151 };