target/linux/ramips/dts/CS-QR10.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
  10         model = "Planex CS-QR10";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 power {
  16                         label = "cs-qr10:red:power";
  17                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
  18                 };
  19         };
  20
  21         gpio-keys-polled {
  22                 compatible = "gpio-keys-polled";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25                 poll-interval = <20>;
  26
  27                 s1 {
  28                         label = "reset";
  29                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32
  33                 s2 {
  34                         label = "wps";
  35                         gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_WPS_BUTTON>;
  37                 };
  38         };
  39 };
  40
  41 &gpio0 {
  42         status = "okay";
  43 };
  44
  45 &gpio1 {
  46         status = "okay";
  47 };
  48
  49 &gpio2 {
  50         status = "okay";
  51 };
  52
  53 &gpio3 {
  54         status = "okay";
  55 };
  56
  57 &i2c {
  58         status = "okay";
  59 };
  60
  61 &i2s {
  62         status = "okay";
  63         pinctrl-names = "default";
  64         pinctrl-0 = <&pcm_i2s_pins>;
  65 };
  66
  67 &spi0 {
  68         status = "okay";
  69
  70         m25p80@0 {
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73                 compatible = "jedec,spi-nor";
  74                 reg = <0>;
  75                 spi-max-frequency = <10000000>;
  76
  77                 partition@0 {
  78                         label = "u-boot";
  79                         reg = <0x0 0x30000>;
  80                         read-only;
  81                 };
  82
  83                 partition@30000 {
  84                         label = "u-boot-env";
  85                         reg = <0x30000 0x10000>;
  86                         read-only;
  87                 };
  88
  89                 factory: partition@40000 {
  90                         label = "factory";
  91                         reg = <0x40000 0x10000>;
  92                         read-only;
  93                 };
  94
  95                 partition@50000 {
  96                         label = "firmware";
  97                         reg = <0x50000 0x7b0000>;
  98                 };
  99         };
 100 };
 101
 102 &pcm {
 103         status = "okay";
 104 };
 105
 106 &gdma {
 107         status = "okay";
 108 };
 109
 110 &pinctrl {
 111         state_default: pinctrl0 {
 112                 gpio {
 113                         ralink,group = "spi refclk", "rgmii1";
 114                         ralink,function = "gpio";
 115                 };
 116                 wdt {
 117                         ralink,group = "wdt";
 118                         ralink,function = "wdt refclk";
 119                 };
 120         };
 121 };
 122
 123 &ethernet {
 124         pinctrl-names = "default";
 125         pinctrl-0 = <&ephy_pins>;
 126         mtd-mac-address = <&factory 0x4>;
 127         mediatek,portmap = "llllw";
 128 };
 129
 130 &gsw {
 131         ralink,port4 = "ephy";
 132 };
 133
 134 &sdhci {
 135         status = "okay";
 136 };
 137
 138 &ehci {
 139         status = "okay";
 140 };
 141
 142 &ohci {
 143         status = "okay";
 144 };
 145
 146 &wmac {
 147         ralink,mtd-eeprom = <&factory 0>;
 148 };
 149
 150 &pcie {
 151         status = "okay";
 152 };