6 compatible = "BR-6475ND", "ralink,rt3883-soc";
7 model = "Edimax BR-6475nD";
10 compatible = "gpio-keys-polled";
13 poll-interval = <100>;
24 linux,input-type = <5>;
30 compatible = "gpio-leds";
33 label = "br-6475nd:green:power";
34 gpios = <&gpio0 10 1>;
38 label = "br-6475nd:amber:wlan";
39 gpios = <&gpio0 11 1>;
43 label = "br-6475nd:amber:wlan_5ghz";
44 gpios = <&gpio0 14 1>;
49 compatible = "cfi-flash";
50 reg = <0x1c000000 0x800000>;
56 reg = <0x00000000 0x00030000>;
62 reg = <0x00030000 0x00010000>;
67 factory: partition@40000 {
68 reg = <0x00040000 0x00010000>;
73 devdata: partition@50000 {
74 reg = <0x00050000 0x00020000>;
80 reg = <0x00070000 0x00790000>;
85 reg = <0x00270000 0x00590000>;
91 compatible = "realtek,rtl8367";
92 gpio-sda = <&gpio0 5 0>;
93 gpio-sck = <&gpio0 4 0>;
94 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
97 /* Unclear if this is the correct gpio setup; the USB ports are
98 unpopulated on a stock BR-6475nD, even though the hardware exists
99 and the headers are there. */
102 compatible = "gpio-export";
106 gpio-export,name="usb";
107 gpio-export,output=<0>;
108 gpios = <&gpio0 19 0>;
115 state_default: pinctrl0 {
117 ralink,group = "spi", "jtag", "uartf";
118 ralink,function = "gpio";
137 mtd-mac-address = <&devdata 0x0d>;
140 mediatek,fixed-link = <1000 1 1 1>;
146 ralink,mtd-eeprom = <&factory 0>;
151 pinctrl-names = "default";
152 pinctrl-0 = <&pci_pins>;
156 ralink,group = "pci";
157 ralink,function = "pci-fnc";
167 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
168 reg = < 0x10000 0 0 0 0 >;
169 ralink,eeprom = "rt2x00pci_1_0.eeprom";