3 /include/ "rt3883.dtsi"
6 compatible = "BR-6475ND", "ralink,rt3883-soc";
7 model = "Edimax BR-6475nD";
10 state_default: pinctrl0 {
12 ralink,group = "spi", "jtag", "uartf";
13 ralink,function = "gpio";
34 mtd-mac-address = <&devdata 0x0d>;
37 ralink,fixed-link = <1000 1 1 1>;
43 ralink,mtd-eeprom = <&factory 0>;
48 pinctrl-names = "default";
49 pinctrl-0 = <&pci_pins>;
54 ralink,function = "pci-fnc";
64 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
65 reg = < 0x10000 0 0 0 0 >;
66 ralink,eeprom = "rt2x00pci_1_0.eeprom";
81 compatible = "cfi-flash";
82 reg = <0x1c000000 0x800000>;
88 reg = <0x00000000 0x00030000>;
94 reg = <0x00030000 0x00010000>;
99 factory: partition@40000 {
100 reg = <0x00040000 0x00010000>;
105 devdata: partition@50000 {
106 reg = <0x00050000 0x00020000>;
112 reg = <0x00070000 0x00790000>;
117 reg = <0x00270000 0x00590000>;
123 compatible = "realtek,rtl8367";
124 gpio-sda = <&gpio0 5 0>;
125 gpio-sck = <&gpio0 4 0>;
126 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
130 compatible = "gpio-keys-polled";
131 #address-cells = <1>;
133 poll-interval = <100>;
137 gpios = <&gpio0 7 1>;
138 linux,code = <0x198>;
143 gpios = <&gpio0 9 1>;
144 linux,input-type = <5>;
150 compatible = "gpio-leds";
153 label = "br-6475nd:green:power";
154 gpios = <&gpio0 10 1>;
158 label = "br-6475nd:amber:wlan";
159 gpios = <&gpio0 11 1>;
163 label = "br-6475nd:amber:wlan_5ghz";
164 gpios = <&gpio0 14 1>;
168 /* Unclear if this is the correct gpio setup; the USB ports are
169 unpopulated on a stock BR-6475nD, even though the hardware exists
170 and the headers are there. */
173 compatible = "gpio-export";
177 gpio-export,name="usb";
178 gpio-export,output=<0>;
179 gpios = <&gpio0 19 0>;