3 /include/ "rt3883.dtsi"
6 compatible = "BR-6475ND", "ralink,rt3883-soc";
7 model = "Edimax BR-6475nD";
10 state_default: pinctrl0 {
12 ralink,group = "spi", "jtag", "uartf";
13 ralink,function = "gpio";
36 ralink,fixed-link = <1000 1 1 1>;
41 ralink,mtd-eeprom = <&factory 0>;
47 pinctrl-names = "default";
48 pinctrl-0 = <&pci_pins>;
52 ralink,function = "pci-fnc";
60 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
61 reg = < 0x10000 0 0 0 0 >;
62 ralink,eeprom = "soc_wmac.eeprom";
77 compatible = "cfi-flash";
78 reg = <0x1c000000 0x800000>;
85 reg = <0x00000000 0x00030000>;
91 reg = <0x00030000 0x00010000>;
96 factory: partition@40000 {
97 reg = <0x00040000 0x00010000>;
103 reg = <0x00050000 0x00020000>;
109 reg = <0x00070000 0x00790000>;
114 reg = <0x00270000 0x00590000>;
120 compatible = "realtek,rtl8367";
121 gpio-sda = <&gpio0 5 0>;
122 gpio-sck = <&gpio0 4 0>;
123 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
127 compatible = "gpio-keys-polled";
128 #address-cells = <1>;
130 poll-interval = <100>;
133 gpios = <&gpio0 7 1>;
134 linux,code = <0x198>;
138 gpios = <&gpio0 9 1>;
139 linux,input-type = <5>;
145 compatible = "gpio-leds";
148 label = "edimax:green:power";
149 gpios = <&gpio0 10 1>;
152 label = "edimax:amber:wlan";
153 gpios = <&gpio0 11 1>;
156 label = "edimax:amber:wlan_5ghz";
157 gpios = <&gpio0 14 1>;
161 /* Unclear if this is the correct gpio setup; the USB ports are
162 unpopulated on a stock BR-6475nD, even though the hardware exists
163 and the headers are there. */
166 compatible = "gpio-export";
169 gpio-export,name="usb";
170 gpio-export,output=<0>;
171 gpios = <&gpio0 19 0>;