3 /include/ "rt3883.dtsi"
6 compatible = "BR-6475ND", "ralink,rt3883-soc";
7 model = "Edimax BR-6475nD";
10 state_default: pinctrl0 {
12 ralink,group = "spi", "jtag", "uartf";
13 ralink,function = "gpio";
34 mtd-mac-address = <&devdata 0x0d>;
37 ralink,fixed-link = <1000 1 1 1>;
42 ralink,mtd-eeprom = <&factory 0>;
48 pinctrl-names = "default";
49 pinctrl-0 = <&pci_pins>;
53 ralink,function = "pci-fnc";
61 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
62 reg = < 0x10000 0 0 0 0 >;
63 ralink,eeprom = "soc_wmac.eeprom";
78 compatible = "cfi-flash";
79 reg = <0x1c000000 0x800000>;
86 reg = <0x00000000 0x00030000>;
92 reg = <0x00030000 0x00010000>;
97 factory: partition@40000 {
98 reg = <0x00040000 0x00010000>;
103 devdata: partition@50000 {
104 reg = <0x00050000 0x00020000>;
110 reg = <0x00070000 0x00790000>;
115 reg = <0x00270000 0x00590000>;
121 compatible = "realtek,rtl8367";
122 gpio-sda = <&gpio0 5 0>;
123 gpio-sck = <&gpio0 4 0>;
124 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
128 compatible = "gpio-keys-polled";
129 #address-cells = <1>;
131 poll-interval = <100>;
134 gpios = <&gpio0 7 1>;
135 linux,code = <0x198>;
139 gpios = <&gpio0 9 1>;
140 linux,input-type = <5>;
146 compatible = "gpio-leds";
149 label = "edimax:green:power";
150 gpios = <&gpio0 10 1>;
153 label = "edimax:amber:wlan";
154 gpios = <&gpio0 11 1>;
157 label = "edimax:amber:wlan_5ghz";
158 gpios = <&gpio0 14 1>;
162 /* Unclear if this is the correct gpio setup; the USB ports are
163 unpopulated on a stock BR-6475nD, even though the hardware exists
164 and the headers are there. */
167 compatible = "gpio-export";
170 gpio-export,name="usb";
171 gpio-export,output=<0>;
172 gpios = <&gpio0 19 0>;