target/linux/ramips/dts/BC2.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "BC2", "ralink,rt3052-soc";
   7         model = "NexAira BC2";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "u-boot";
  19                         reg = <0x0 0x30000>;
  20                         read-only;
  21                 };
  22
  23                 partition@30000 {
  24                         label = "u-boot-env";
  25                         reg = <0x30000 0x10000>;
  26                         read-only;
  27                 };
  28
  29                 factory: partition@40000 {
  30                         label = "factory";
  31                         reg = <0x40000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 partition@50000 {
  36                         label = "firmware";
  37                         reg = <0x50000 0x7b0000>;
  38                 };
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43
  44                 usb {
  45                         label = "bc2:blue:usb";
  46                         gpios = <&gpio0 20 1>;
  47                 };
  48         };
  49
  50         gpio-keys-polled {
  51                 compatible = "gpio-keys-polled";
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54                 poll-interval = <20>;
  55
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio0 17 1>;
  59                         linux,code = <0x198>;
  60                 };
  61         };
  62 };
  63
  64 &pinctrl {
  65         state_default: pinctrl0 {
  66                 gpio {
  67                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  68                         ralink,function = "gpio";
  69                 };
  70         };
  71 };
  72
  73 &ethernet {
  74         mtd-mac-address = <&factory 0x4>;
  75 };
  76
  77 &esw {
  78         mediatek,portmap = <0x2f>;
  79 };
  80
  81 &wmac {
  82         ralink,mtd-eeprom = <&factory 0>;
  83 };
  84
  85 &otg {
  86         status = "okay";
  87 };