target/linux/ramips/dts/BC2.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "nexaira,bc2", "ralink,rt3052-soc";
  10         model = "NexAira BC2";
  11
  12         cfi@1f000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1f000000 0x800000>;
  15                 bank-width = <2>;
  16                 device-width = <2>;
  17
  18                 partitions {
  19                         compatible = "fixed-partitions";
  20                         #address-cells = <1>;
  21                         #size-cells = <1>;
  22
  23                         partition@0 {
  24                                 label = "u-boot";
  25                                 reg = <0x0 0x30000>;
  26                                 read-only;
  27                         };
  28
  29                         partition@30000 {
  30                                 label = "u-boot-env";
  31                                 reg = <0x30000 0x10000>;
  32                                 read-only;
  33                         };
  34
  35                         factory: partition@40000 {
  36                                 label = "factory";
  37                                 reg = <0x40000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         partition@50000 {
  42                                 label = "firmware";
  43                                 reg = <0x50000 0x7b0000>;
  44                         };
  45                 };
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50
  51                 usb {
  52                         label = "bc2:blue:usb";
  53                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  54                         trigger-sources = <&otg_port1>;
  55                         linux,default-trigger = "usbport";
  56                 };
  57         };
  58
  59         gpio-keys-polled {
  60                 compatible = "gpio-keys-polled";
  61                 poll-interval = <20>;
  62
  63                 reset {
  64                         label = "reset";
  65                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_RESTART>;
  67                 };
  68         };
  69 };
  70
  71 &pinctrl {
  72         state_default: pinctrl0 {
  73                 gpio {
  74                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  75                         ralink,function = "gpio";
  76                 };
  77         };
  78 };
  79
  80 &ethernet {
  81         mtd-mac-address = <&factory 0x4>;
  82 };
  83
  84 &esw {
  85         mediatek,portmap = <0x2f>;
  86 };
  87
  88 &wmac {
  89         ralink,mtd-eeprom = <&factory 0>;
  90 };
  91
  92 &otg {
  93         status = "okay";
  94 };