target/linux/ramips/dts/ArcherC50.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "TP-Link Archer C50";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         gpio-leds {
  14                 compatible = "gpio-leds";
  15
  16                 lan {
  17                         label = "tp-link:blue:lan";
  18                         gpios = <&gpio0 1 1>;
  19                 };
  20
  21                 power {
  22                         label = "tp-link:blue:power";
  23                         gpios = <&gpio0 7 0>;
  24                 };
  25
  26                 usb {
  27                         label = "tp-link:blue:usb";
  28                         gpios = <&gpio0 9 1>;
  29                 };
  30
  31                 wlan5g {
  32                         label = "tp-link:blue:wlan5g";
  33                         gpios = <&gpio0 11 1>;
  34                 };
  35
  36                 wlan2g {
  37                         label = "tp-link:blue:wlan2g";
  38                         gpios = <&gpio3 0 1>;
  39                 };
  40         };
  41
  42         gpio-keys-polled {
  43                 compatible = "gpio-keys-polled";
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 poll-interval = <20>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 13 1>;
  51                         linux,code = <0x198>;
  52                 };
  53
  54                 rfkill {
  55                         label = "rfkill";
  56                         gpios = <&gpio0 2 1>;
  57                         linux,code = <0xf7>;
  58                 };      };
  59 };
  60
  61 &gpio2 {
  62         status = "okay";
  63 };
  64
  65 &gpio3 {
  66         status = "okay";
  67 };
  68
  69 &spi0 {
  70         status = "okay";
  71
  72         m25p80@0 {
  73                 #address-cells = <1>;
  74                 #size-cells = <1>;
  75                 compatible = "jedec,spi-nor";
  76                 reg = <0>;
  77                 linux,modalias = "m25p80", "mx25l6405d";
  78                 spi-max-frequency = <10000000>;
  79
  80                 partition@0 {
  81                         label = "u-boot";
  82                         reg = <0x0 0x20000>;
  83                         read-only;
  84                 };
  85
  86                 partition@20000 {
  87                         label = "firmware";
  88                         reg = <0x20000 0x7a0000>;
  89                 };
  90
  91                 partition@7c0000 {
  92                         label = "config";
  93                         reg = <0x7c0000 0x10000>;
  94                 };
  95
  96                 rom: partition@7d0000 {
  97                         label = "rom";
  98                         reg = <0x7d0000 0x10000>;
  99                 };
 100
 101                 partition@7e0000 {
 102                         label = "romfile";
 103                         reg = <0x7e0000 0x10000>;
 104                 };
 105
 106                 radio: partition@7f0000 {
 107                         label = "radio";
 108                         reg = <0x7f0000 0x10000>;
 109                 };
 110         };
 111 };
 112
 113 &pinctrl {
 114         state_default: pinctrl0 {
 115                 gpio {
 116                         ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
 117                         ralink,function = "gpio";
 118                 };
 119         };
 120 };
 121
 122 &ethernet {
 123                 pinctrl-names = "default";
 124                 pinctrl-0 = <&ephy_pins>;
 125                 mtd-mac-address = <&rom 0xf100>;
 126                 mediatek,portmap = "wllll";
 127         };
 128
 129 &ehci {
 130         status = "okay";
 131 };
 132
 133 &ohci {
 134         status = "okay";
 135 };
 136
 137 &gsw {
 138         mediatek,port4 = "ephy";
 139 };
 140
 141 &wmac {
 142         ralink,mtd-eeprom = <&radio 0>;
 143 };
 144
 145 &pcie {
 146         status = "okay";
 147
 148         pcie-bridge {
 149                 mt76@0,0 {
 150                         reg = <0x0000 0 0 0 0>;
 151                         device_type = "pci";
 152                         mediatek,mtd-eeprom = <&radio 32768>;
 153                         mediatek,2ghz = <0>;
 154                 };
 155         };
 156 };