target/linux/ramips/dts/ATP-52B.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "argus,atp-52b", "ralink,rt3052-soc";
  10         model = "Argus ATP-52B";
  11
  12         cfi@1f000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1f000000 0x800000>;
  15                 bank-width = <2>;
  16                 device-width = <2>;
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19
  20                 partition@0 {
  21                         label = "bootloader";
  22                         reg = <0x0 0x30000>;
  23                         read-only;
  24                 };
  25
  26                 partition@30000 {
  27                         label = "config";
  28                         reg = <0x30000 0x10000>;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                 };
  35
  36                 partition@50000 {
  37                         label = "firmware";
  38                         reg = <0x50000 0x7a0000>;
  39                 };
  40         };
  41
  42         gpio-leds {
  43                 compatible = "gpio-leds";
  44
  45                 run {
  46                         label = "atp-52b:green:run";
  47                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 net {
  51                         label = "atp-52b:amber:net";
  52                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55
  56         gpio-keys-polled {
  57                 compatible = "gpio-keys-polled";
  58                 #address-cells = <1>;
  59                 #size-cells = <0>;
  60                 poll-interval = <20>;
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_WPS_BUTTON>;
  66                 };
  67
  68                 reset {
  69                         label = "reset";
  70                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  71                         linux,code = <KEY_RESTART>;
  72                 };
  73         };
  74 };
  75
  76 &pinctrl {
  77         state_default: pinctrl0 {
  78                 gpio {
  79                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  80                         ralink,function = "gpio";
  81                 };
  82         };
  83 };
  84
  85
  86 &ethernet {
  87         mtd-mac-address = <&factory 0x4>;
  88 };
  89
  90 &esw {
  91         mediatek,portmap = <0x3e>;
  92 };
  93
  94 &wmac {
  95         ralink,mtd-eeprom = <&factory 0>;
  96 };
  97
  98 &otg {
  99         status = "okay";
 100 };