target/linux/ramips/dts/3G-6200NL.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
  10         model = "Edimax 3g-6200nl";
  11
  12         aliases {
  13                 led-status = &led_internet;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 label = "u-boot";
  29                                 reg = <0x0 0x30000>;
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 label = "u-boot-env";
  35                                 reg = <0x30000 0x10000>;
  36                                 read-only;
  37                         };
  38
  39                         factory: partition@40000 {
  40                                 label = "factory";
  41                                 reg = <0x40000 0x10000>;
  42                                 read-only;
  43                         };
  44
  45                         partition@3e0000 {
  46                                 label = "cimage";
  47                                 reg = <0x3e0000 0x20000>;
  48                                 read-only;
  49                         };
  50
  51                         partition@50000 {
  52                                 label = "firmware";
  53                                 reg = <0x50000 0x390000>;
  54                         };
  55                 };
  56         };
  57
  58         gpio-leds {
  59                 compatible = "gpio-leds";
  60
  61                 led_internet: internet {
  62                         label = "3g-6200nl:green:internet";
  63                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wlan {
  67                         label = "3g-6200nl:green:wlan";
  68                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  69                 };
  70         };
  71
  72         gpio-keys-polled {
  73                 compatible = "gpio-keys-polled";
  74                 poll-interval = <20>;
  75
  76                 reset {
  77                         label = "reset";
  78                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_RESTART>;
  80                 };
  81         };
  82 };
  83
  84 &pinctrl {
  85         state_default: pinctrl0 {
  86                 gpio {
  87                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  88                         ralink,function = "gpio";
  89                 };
  90         };
  91 };
  92
  93 &ethernet {
  94         mtd-mac-address = <&factory 0x4>;
  95 };
  96
  97 &esw {
  98         mediatek,portdisable = <0x37>;
  99 };
 100
 101 &wmac {
 102         ralink,mtd-eeprom = <&factory 0>;
 103 };
 104
 105 &otg {
 106         status = "okay";
 107 };