ramips: disable NAND device in mt7621.dtsi to fix boot errors on many devices
[oweals/openwrt.git] / target / linux / ramips / dts / 3G-6200N.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6         compatible = "3G-6200N", "ralink,rt3050-soc";
7         model = "Edimax 3g-6200n";
8
9         pinctrl {
10                 state_default: pinctrl0 {
11                         gpio {
12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13                                 ralink,function = "gpio";
14                         };
15                 };
16         };
17
18         cfi@1f000000 {
19                 compatible = "cfi-flash";
20                 reg = <0x1f000000 0x800000>;
21                 bank-width = <2>;
22                 device-width = <2>;
23                 #address-cells = <1>;
24                 #size-cells = <1>;
25
26                 partition@0 {
27                         label = "u-boot";
28                         reg = <0x0 0x30000>;
29                         read-only;
30                 };
31
32                 partition@30000 {
33                         label = "u-boot-env";
34                         reg = <0x30000 0x10000>;
35                         read-only;
36                 };
37
38                 factory: partition@40000 {
39                         label = "factory";
40                         reg = <0x40000 0x10000>;
41                         read-only;
42                 };
43
44                 partition@3e0000 {
45                         label = "cimage";
46                         reg = <0x3e0000 0x20000>;
47                         read-only;
48                 };
49
50                 partition@50000 {
51                         label = "firmware";
52                         reg = <0x50000 0x390000>;
53                 };
54         };
55
56         ethernet@10100000 {
57                 mtd-mac-address = <&factory 0x4>;
58         };
59
60         esw@10110000 {
61                 mediatek,portmap = <0x2f>;
62         };
63
64         wmac@10180000 {
65                 ralink,mtd-eeprom = <&factory 0>;
66         };
67
68         gpio-leds {
69                 compatible = "gpio-leds";
70
71                 power {
72                         label = "3g-6200n:green:power";
73                         gpios = <&gpio0 9 1>;
74                 };
75
76                 wlan {
77                         label = "3g-6200n:amber:wlan";
78                         gpios = <&gpio0 14 1>;
79                 };
80
81                 3g {
82                         label = "3g-6200n:blue:3g";
83                         gpios = <&gpio0 7 1>;
84                 };
85         };
86
87         gpio-keys-polled {
88                 compatible = "gpio-keys-polled";
89                 #address-cells = <1>;
90                 #size-cells = <0>;
91                 poll-interval = <20>;
92
93                 wps {
94                         label = "wps";
95                         gpios = <&gpio0 12 1>;
96                         linux,code = <0x211>;
97                 };
98
99                 wlanswitch {
100                         label = "wlanswitch";
101                         gpios = <&gpio0 13 1>;
102                         linux,code = <0x100>;
103                 };
104         };
105
106         otg@101c0000 {
107                 status = "okay";
108         };
109 };