target/linux/ppc40x/patches/006-magicboxv2.patch

   1 diff -Nur a/arch/powerpc/boot/cuboot-magicboxv2.c b/arch/powerpc/boot/cuboot-magicboxv2.c
   2 --- a/arch/powerpc/boot/cuboot-magicboxv2.c     1970-01-01 01:00:00.000000000 +0100
   3 +++ b/arch/powerpc/boot/cuboot-magicboxv2.c     2008-11-26 09:29:02.000000000 +0100
   4 @@ -0,0 +1,40 @@
   5 +/*
   6 + * Old U-boot compatibility for Magicbox v2
   7 + *
   8 + * Author: Imre Kaloz <kaloz@openwrt.org>
   9 + *
  10 + * This program is free software; you can redistribute it and/or modify it
  11 + * under the terms of the GNU General Public License version 2 as published
  12 + * by the Free Software Foundation.
  13 + */
  14 +
  15 +#include "ops.h"
  16 +#include "io.h"
  17 +#include "dcr.h"
  18 +#include "stdio.h"
  19 +#include "4xx.h"
  20 +#include "44x.h"
  21 +#include "cuboot.h"
  22 +
  23 +#define TARGET_4xx
  24 +#define TARGET_405EP
  25 +#include "ppcboot.h"
  26 +
  27 +static bd_t bd;
  28 +
  29 +static void magicboxv2_fixups(void)
  30 +{
  31 +       ibm405ep_fixup_clocks(25000000);
  32 +       ibm4xx_sdram_fixup_memsize();
  33 +       dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
  34 +}
  35 +
  36 +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
  37 +               unsigned long r6, unsigned long r7)
  38 +{
  39 +       CUBOOT_INIT();
  40 +       platform_ops.fixups = magicboxv2_fixups;
  41 +       platform_ops.exit = ibm40x_dbcr_reset;
  42 +       fdt_init(_dtb_start);
  43 +       serial_console_init();
  44 +}
  45 diff -Nur a/arch/powerpc/boot/dts/magicboxv2.dts b/arch/powerpc/boot/dts/magicboxv2.dts
  46 --- a/arch/powerpc/boot/dts/magicboxv2.dts      1970-01-01 01:00:00.000000000 +0100
  47 +++ b/arch/powerpc/boot/dts/magicboxv2.dts      2008-11-26 09:28:10.000000000 +0100
  48 @@ -0,0 +1,250 @@
  49 +/*
  50 + * Device Tree Source for Magicbox v2
  51 + *
  52 + * Copyright 2008 Imre Kaloz <kaloz@openwrt.org>
  53 + *
  54 + * Based on walnut.dts
  55 + *
  56 + * This file is licensed under the terms of the GNU General Public
  57 + * License version 2.  This program is licensed "as is" without
  58 + * any warranty of any kind, whether express or implied.
  59 + */
  60 +
  61 +/dts-v1/;
  62 +
  63 +/ {
  64 +       #address-cells = <1>;
  65 +       #size-cells = <1>;
  66 +       model = "magicboxv2";
  67 +       compatible = "magicboxv2";
  68 +       dcr-parent = <&{/cpus/cpu@0}>;
  69 +
  70 +       aliases {
  71 +               ethernet0 = &EMAC0;
  72 +               ethernet1 = &EMAC1;
  73 +               serial0 = &UART0;
  74 +               serial1 = &UART1;
  75 +       };
  76 +
  77 +       cpus {
  78 +               #address-cells = <1>;
  79 +               #size-cells = <0>;
  80 +
  81 +               cpu@0 {
  82 +                       device_type = "cpu";
  83 +                       model = "PowerPC,405EP";
  84 +                       reg = <0x00000000>;
  85 +                       clock-frequency = <0xbebc200>; /* Filled in by zImage */
  86 +                       timebase-frequency = <0>; /* Filled in by zImage */
  87 +                       i-cache-line-size = <20>;
  88 +                       d-cache-line-size = <20>;
  89 +                       i-cache-size = <4000>;
  90 +                       d-cache-size = <4000>;
  91 +                       dcr-controller;
  92 +                       dcr-access-method = "native";
  93 +               };
  94 +       };
  95 +
  96 +       memory {
  97 +               device_type = "memory";
  98 +               reg = <0x00000000 0x00000000>; /* Filled in by zImage */
  99 +       };
 100 +
 101 +       UIC0: interrupt-controller {
 102 +               compatible = "ibm,uic";
 103 +               interrupt-controller;
 104 +               cell-index = <0>;
 105 +               dcr-reg = <0x0c0 0x009>;
 106 +               #address-cells = <0>;
 107 +               #size-cells = <0>;
 108 +               #interrupt-cells = <2>;
 109 +       };
 110 +
 111 +       plb {
 112 +               compatible = "ibm,plb3";
 113 +               #address-cells = <1>;
 114 +               #size-cells = <1>;
 115 +               ranges;
 116 +               clock-frequency = <0>; /* Filled in by zImage */
 117 +
 118 +               SDRAM0: memory-controller {
 119 +                       compatible = "ibm,sdram-405ep";
 120 +                       dcr-reg = <0x010 0x002>;
 121 +               };
 122 +
 123 +               MAL: mcmal {
 124 +                       compatible = "ibm,mcmal-405ep", "ibm,mcmal";
 125 +                       dcr-reg = <0x180 0x062>;
 126 +                       num-tx-chans = <4>;
 127 +                       num-rx-chans = <2>;
 128 +                       interrupt-parent = <&UIC0>;
 129 +                       interrupts = <
 130 +                               0xb 0x4 /* TXEOB */
 131 +                               0xc 0x4 /* RXEOB */
 132 +                               0xa 0x4 /* SERR */
 133 +                               0xd 0x4 /* TXDE */
 134 +                               0xe 0x4 /* RXDE */>;
 135 +               };
 136 +
 137 +               POB0: opb {
 138 +                       compatible = "ibm,opb-405ep", "ibm,opb";
 139 +                       #address-cells = <1>;
 140 +                       #size-cells = <1>;
 141 +                       ranges = <0xef600000 0xef600000 0x00a00000>;
 142 +                       dcr-reg = <0x0a0 0x005>;
 143 +                       clock-frequency = <0>; /* Filled in by zImage */
 144 +
 145 +                       UART0: serial@ef600300 {
 146 +                               device_type = "serial";
 147 +                               compatible = "ns16550";
 148 +                               reg = <0xef600300 0x00000008>;
 149 +                               virtual-reg = <0xef600300>;
 150 +                               clock-frequency = <0>; /* Filled in by zImage */
 151 +                               current-speed = <115200>;
 152 +                               interrupt-parent = <&UIC0>;
 153 +                               interrupts = <0x0 0x4>;
 154 +                       };
 155 +
 156 +                       UART1: serial@ef600400 {
 157 +                               device_type = "serial";
 158 +                               compatible = "ns16550";
 159 +                               reg = <0xef600400 0x00000008>;
 160 +                               virtual-reg = <0xef600400>;
 161 +                               clock-frequency = <0>; /* Filled in by zImage */
 162 +                               current-speed = <115200>;
 163 +                               interrupt-parent = <&UIC0>;
 164 +                               interrupts = <0x1 0x4>;
 165 +                       };
 166 +
 167 +                       IIC: i2c@ef600500 {
 168 +                               compatible = "ibm,iic-405ep", "ibm,iic";
 169 +                               reg = <0xef600500 0x00000011>;
 170 +                               interrupt-parent = <&UIC0>;
 171 +                               interrupts = <0x2 0x4>;
 172 +                       };
 173 +
 174 +                       GPIO: gpio@ef600700 {
 175 +                               compatible = "ibm,gpio-405ep";
 176 +                               reg = <0xef600700 0x00000020>;
 177 +                       };
 178 +
 179 +                       EMAC0: ethernet@ef600800 {
 180 +                               linux,network-index = <0x0>;
 181 +                               device_type = "network";
 182 +                               compatible = "ibm,emac-405ep", "ibm,emac";
 183 +                               interrupt-parent = <&UIC0>;
 184 +                               interrupts = <
 185 +                                       0xf 0x4 /* Ethernet */
 186 +                                       0x9 0x4 /* Ethernet Wake Up */>;
 187 +                               local-mac-address = [000000000000]; /* Filled in by zImage */
 188 +                               reg = <0xef600800 0x00000070>;
 189 +                               mal-device = <&MAL>;
 190 +                               mal-tx-channel = <0>;
 191 +                               mal-rx-channel = <0>;
 192 +                               cell-index = <0>;
 193 +                               max-frame-size = <0x5dc>;
 194 +                               rx-fifo-size = <0x1000>;
 195 +                               tx-fifo-size = <0x800>;
 196 +                               phy-mode = "mii";
 197 +                               phy-map = <0x00000000>;
 198 +                       };
 199 +                       EMAC1: ethernet@ef600900 {
 200 +                               linux,network-index = <0x1>;
 201 +                               device_type = "network";
 202 +                               compatible = "ibm,emac-405ep", "ibm,emac";
 203 +                               interrupt-parent = <&UIC0>;
 204 +                               interrupts = <
 205 +                                       0x11 0x4 /* Ethernet */
 206 +                                       0x09 0x4 /* Ethernet Wake Up */>;
 207 +                               local-mac-address = [000000000000]; /* Filled in by zImage */
 208 +                               reg = <0xef600900 0x00000070>;
 209 +                               mal-device = <&MAL>;
 210 +                               mal-tx-channel = <2>;
 211 +                               mal-rx-channel = <1>;
 212 +                               cell-index = <1>;
 213 +                               max-frame-size = <0x5dc>;
 214 +                               rx-fifo-size = <0x1000>;
 215 +                               tx-fifo-size = <0x800>;
 216 +                               mdio-device = <&EMAC0>;
 217 +                               phy-mode = "mii";
 218 +                               phy-map = <0x00000001>;
 219 +                       };
 220 +
 221 +               };
 222 +
 223 +               EBC0: ebc {
 224 +                       compatible = "ibm,ebc-405ep", "ibm,ebc";
 225 +                       dcr-reg = <0x012 0x002>;
 226 +                       #address-cells = <2>;
 227 +                       #size-cells = <1>;
 228 +                       /* The ranges property is supplied by the bootwrapper
 229 +                        * and is based on the firmware's configuration of the
 230 +                        * EBC bridge
 231 +                        */
 232 +                       clock-frequency = <0>; /* Filled in by zImage */
 233 +
 234 +                       nor_flash@ffc00000 {
 235 +                               compatible = "cfi-flash";
 236 +                               bank-width = <2>;
 237 +                               reg = <0x00000000 0xffc00000 0x00400000>;
 238 +                               #address-cells = <1>;
 239 +                               #size-cells = <1>;
 240 +                               partition@0 {
 241 +                                       label = "linux";
 242 +                                       reg = <0x0 0x3c0000>;
 243 +                               };
 244 +                               partition@100000 {
 245 +                                       label = "rootfs";
 246 +                                       reg = <0x100000 0x2c0000>;
 247 +                               };
 248 +                               partition@3c0000 {
 249 +                                       label = "u-boot";
 250 +                                       reg = <0x3c0000 0x30000>;
 251 +                                       read-only;
 252 +                               };
 253 +                       };
 254 +               };
 255 +
 256 +               PCI0: pci@ec000000 {
 257 +                       device_type = "pci";
 258 +                       #interrupt-cells = <1>;
 259 +                       #size-cells = <2>;
 260 +                       #address-cells = <3>;
 261 +                       compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
 262 +                       primary;
 263 +                       reg = <0xeec00000 0x00000008    /* Config space access */
 264 +                              0xeed80000 0x00000004    /* IACK */
 265 +                              0xeed80000 0x00000004    /* Special cycle */
 266 +                              0xef480000 0x00000040>;  /* Internal registers */
 267 +
 268 +                       /* Outbound ranges, one memory and one IO,
 269 +                        * later cannot be changed. Chip supports a second
 270 +                        * IO range but we don't use it for now
 271 +                        */
 272 +                       ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
 273 +                                 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 274 +
 275 +                       /* Inbound 2GB range starting at 0 */
 276 +                       dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 277 +
 278 +                       interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 279 +                       interrupt-map = <
 280 +                               /* IDSEL 1 */
 281 +                               0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 282 +
 283 +                               /* IDSEL 2 */
 284 +                               0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
 285 +
 286 +                               /* IDSEL 3 */
 287 +                               0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
 288 +
 289 +                               /* IDSEL 4 */
 290 +                               0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
 291 +                       >;
 292 +               };
 293 +       };
 294 +
 295 +       chosen {
 296 +               linux,stdout-path = "/plb/opb/serial@ef600300";
 297 +       };
 298 +};
 299 diff -Nur a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
 300 --- a/arch/powerpc/boot/Makefile        2008-11-26 09:15:15.000000000 +0100
 301 +++ b/arch/powerpc/boot/Makefile        2008-11-26 09:17:01.000000000 +0100
 302 @@ -69,7 +69,7 @@
 303                 cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 304                 cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 305                 virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
 306 -               cuboot-acadia.c cuboot-magicboxv1.c
 307 +               cuboot-acadia.c cuboot-magicboxv1.c cuboot-magicboxv2.c
 308  src-boot := $(src-wlib) $(src-plat) empty.c
 309
 310  src-boot := $(addprefix $(obj)/, $(src-boot))
 311 @@ -214,6 +214,7 @@
 312  image-$(CONFIG_WALNUT)                 += treeImage.walnut
 313  image-$(CONFIG_ACADIA)                 += cuImage.acadia
 314  image-$(CONFIG_MAGICBOXV1)             += cuImage.magicboxv1
 315 +image-$(CONFIG_MAGICBOXV2)             += cuImage.magicboxv2
 316
 317  # Board ports in arch/powerpc/platform/44x/Kconfig
 318  image-$(CONFIG_EBONY)                  += treeImage.ebony cuImage.ebony
 319 diff -Nur a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
 320 --- a/arch/powerpc/platforms/40x/Kconfig        2008-11-26 09:15:15.000000000 +0100
 321 +++ b/arch/powerpc/platforms/40x/Kconfig        2008-11-26 09:16:08.000000000 +0100
 322 @@ -51,6 +51,16 @@
 323         help
 324           This option enables support for the Magicbox v1 board.
 325
 326 +config MAGICBOXV2
 327 +       bool "Magicbox v2"
 328 +       depends on 40x
 329 +       default n
 330 +       select PPC40x_SIMPLE
 331 +       select 405EP
 332 +       select PCI
 333 +       help
 334 +         This option enables support for the Magicbox v2 board.
 335 +
 336  config MAKALU
 337         bool "Makalu"
 338         depends on 40x
 339 diff -Nur a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
 340 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c        2008-11-26 09:15:15.000000000 +0100
 341 +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c        2008-11-26 09:15:46.000000000 +0100
 342 @@ -52,7 +52,8 @@
 343   */
 344  static char *board[] __initdata = {
 345         "amcc,acadia",
 346 -       "magicboxv1"
 347 +       "magicboxv1",
 348 +       "magicboxv2",
 349  };
 350
 351  static int __init ppc40x_probe(void)