target/linux/ppc40x/patches/005-openrb.patch

   1 --- /dev/null
   2 +++ b/arch/powerpc/boot/cuboot-openrb.c
   3 @@ -0,0 +1,77 @@
   4 +/*
   5 + * Old U-boot compatibility for OpenRB boards
   6 + *
   7 + * Author: Gabor Juhos <juhosg@openwrt.org>
   8 + *         Imre Kaloz <kaloz@openwrt.org>
   9 + *
  10 + * This program is free software; you can redistribute it and/or modify it
  11 + * under the terms of the GNU General Public License version 2 as published
  12 + * by the Free Software Foundation.
  13 + */
  14 +
  15 +#include "ops.h"
  16 +#include "io.h"
  17 +#include "dcr.h"
  18 +#include "stdio.h"
  19 +#include "4xx.h"
  20 +#include "44x.h"
  21 +#include "cuboot.h"
  22 +
  23 +#define TARGET_4xx
  24 +#define TARGET_405EP
  25 +#include "ppcboot.h"
  26 +
  27 +static bd_t bd;
  28 +
  29 +static void fixup_perwe(void)
  30 +{
  31 +#define DCRN_CPC0_PCI_BASE     0xf9
  32 +
  33 +       /* Turn on PerWE instead of PCIINT */
  34 +       mtdcr(DCRN_CPC0_PCI_BASE,
  35 +             mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
  36 +
  37 +#undef DCRN_CPC0_PCI_BASE
  38 +}
  39 +
  40 +static void fixup_cf_card(void)
  41 +{
  42 +#define CF_CS0_BASE            0xff100000
  43 +#define CF_CS1_BASE            0xff200000
  44 +
  45 +       /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
  46 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR);
  47 +       mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
  48 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP);
  49 +       mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
  50 +
  51 +       /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
  52 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR);
  53 +       mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
  54 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP);
  55 +       mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
  56 +
  57 +#undef CF_CS0_BASE
  58 +#undef CF_CS1_BASE
  59 +}
  60 +
  61 +static void openrb_fixups(void)
  62 +{
  63 +       ibm405ep_fixup_clocks(bd.bi_procfreq / 8);
  64 +       ibm4xx_sdram_fixup_memsize();
  65 +
  66 +       fixup_perwe();
  67 +       fixup_cf_card();
  68 +
  69 +       dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
  70 +}
  71 +
  72 +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
  73 +               unsigned long r6, unsigned long r7)
  74 +{
  75 +       CUBOOT_INIT();
  76 +       platform_ops.fixups = openrb_fixups;
  77 +       platform_ops.exit = ibm40x_dbcr_reset;
  78 +       fdt_init(_dtb_start);
  79 +       serial_console_init();
  80 +}
  81 --- /dev/null
  82 +++ b/arch/powerpc/boot/dts/openrb.dts
  83 @@ -0,0 +1,280 @@
  84 +/*
  85 + * Device Tree Source for OpenRB boards
  86 + *
  87 + * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
  88 + * Copyright 2009 Imre Kaloz <kaloz@openwrt.org>
  89 + *
  90 + * Based on walnut.dts
  91 + *
  92 + * This file is licensed under the terms of the GNU General Public
  93 + * License version 2.  This program is licensed "as is" without
  94 + * any warranty of any kind, whether express or implied.
  95 + */
  96 +
  97 +/dts-v1/;
  98 +
  99 +/ {
 100 +       #address-cells = <1>;
 101 +       #size-cells = <1>;
 102 +       model = "openrb";
 103 +       compatible = "openrb";
 104 +       dcr-parent = <&{/cpus/cpu@0}>;
 105 +
 106 +       aliases {
 107 +               ethernet0 = &EMAC0;
 108 +               ethernet1 = &EMAC1;
 109 +               serial0 = &UART0;
 110 +               serial1 = &UART1;
 111 +       };
 112 +
 113 +       cpus {
 114 +               #address-cells = <1>;
 115 +               #size-cells = <0>;
 116 +
 117 +               cpu@0 {
 118 +                       device_type = "cpu";
 119 +                       model = "PowerPC,405EP";
 120 +                       reg = <0x00000000>;
 121 +                       clock-frequency = <0>; /* Filled in by zImage */
 122 +                       timebase-frequency = <0>; /* Filled in by zImage */
 123 +                       i-cache-line-size = <0x20>;
 124 +                       d-cache-line-size = <0x20>;
 125 +                       i-cache-size = <0x4000>;
 126 +                       d-cache-size = <0x4000>;
 127 +                       dcr-controller;
 128 +                       dcr-access-method = "native";
 129 +               };
 130 +       };
 131 +
 132 +       memory {
 133 +               device_type = "memory";
 134 +               reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 135 +       };
 136 +
 137 +       UIC0: interrupt-controller {
 138 +               compatible = "ibm,uic";
 139 +               interrupt-controller;
 140 +               cell-index = <0>;
 141 +               dcr-reg = <0x0c0 0x009>;
 142 +               #address-cells = <0>;
 143 +               #size-cells = <0>;
 144 +               #interrupt-cells = <2>;
 145 +       };
 146 +
 147 +       plb {
 148 +               compatible = "ibm,plb3";
 149 +               #address-cells = <1>;
 150 +               #size-cells = <1>;
 151 +               ranges;
 152 +               clock-frequency = <0>; /* Filled in by zImage */
 153 +
 154 +               SDRAM0: memory-controller {
 155 +                       compatible = "ibm,sdram-405ep";
 156 +                       dcr-reg = <0x010 0x002>;
 157 +               };
 158 +
 159 +               MAL: mcmal {
 160 +                       compatible = "ibm,mcmal-405ep", "ibm,mcmal";
 161 +                       dcr-reg = <0x180 0x062>;
 162 +                       num-tx-chans = <4>;
 163 +                       num-rx-chans = <2>;
 164 +                       interrupt-parent = <&UIC0>;
 165 +                       interrupts = <
 166 +                               0xb 0x4 /* TXEOB */
 167 +                               0xc 0x4 /* RXEOB */
 168 +                               0xa 0x4 /* SERR */
 169 +                               0xd 0x4 /* TXDE */
 170 +                               0xe 0x4 /* RXDE */>;
 171 +               };
 172 +
 173 +               POB0: opb {
 174 +                       compatible = "ibm,opb-405ep", "ibm,opb";
 175 +                       #address-cells = <1>;
 176 +                       #size-cells = <1>;
 177 +                       ranges = <0xef600000 0xef600000 0x00a00000>;
 178 +                       dcr-reg = <0x0a0 0x005>;
 179 +                       clock-frequency = <0>; /* Filled in by zImage */
 180 +
 181 +                       UART0: serial@ef600300 {
 182 +                               device_type = "serial";
 183 +                               compatible = "ns16550";
 184 +                               reg = <0xef600300 0x00000008>;
 185 +                               virtual-reg = <0xef600300>;
 186 +                               clock-frequency = <0>; /* Filled in by zImage */
 187 +                               current-speed = <115200>;
 188 +                               interrupt-parent = <&UIC0>;
 189 +                               interrupts = <0x0 0x4>;
 190 +                       };
 191 +
 192 +                       UART1: serial@ef600400 {
 193 +                               device_type = "serial";
 194 +                               compatible = "ns16550";
 195 +                               reg = <0xef600400 0x00000008>;
 196 +                               virtual-reg = <0xef600400>;
 197 +                               clock-frequency = <0>; /* Filled in by zImage */
 198 +                               current-speed = <115200>;
 199 +                               interrupt-parent = <&UIC0>;
 200 +                               interrupts = <0x1 0x4>;
 201 +                       };
 202 +
 203 +                       IIC: i2c@ef600500 {
 204 +                               compatible = "ibm,iic-405ep", "ibm,iic";
 205 +                               #address-cells = <1>;
 206 +                               #size-cells = <0>;
 207 +                               reg = <0xef600500 0x00000011>;
 208 +                               interrupt-parent = <&UIC0>;
 209 +                               interrupts = <0x2 0x4>;
 210 +
 211 +                               eeprom@50 {
 212 +                                       compatible = "at24,24c16";
 213 +                                       reg = <0x50>;
 214 +                               };
 215 +                       };
 216 +
 217 +                       GPIO0: gpio-controller@ef600700 {
 218 +                               compatible = "ibm,ppc4xx-gpio";
 219 +                               reg = <0xef600700 0x00000020>;
 220 +                               #gpio-cells = <2>;
 221 +                               gpio-controller;
 222 +                       };
 223 +
 224 +                       EMAC0: ethernet@ef600800 {
 225 +                               linux,network-index = <0x0>;
 226 +                               device_type = "network";
 227 +                               compatible = "ibm,emac-405ep", "ibm,emac";
 228 +                               interrupt-parent = <&UIC0>;
 229 +                               interrupts = <
 230 +                                       0xf 0x4 /* Ethernet */
 231 +                                       0x9 0x4 /* Ethernet Wake Up */>;
 232 +                               local-mac-address = [000000000000]; /* Filled in by zImage */
 233 +                               reg = <0xef600800 0x00000070>;
 234 +                               mal-device = <&MAL>;
 235 +                               mal-tx-channel = <0>;
 236 +                               mal-rx-channel = <0>;
 237 +                               cell-index = <0>;
 238 +                               max-frame-size = <0x5dc>;
 239 +                               rx-fifo-size = <0x1000>;
 240 +                               tx-fifo-size = <0x800>;
 241 +                               phy-mode = "mii";
 242 +                               phy-map = <0x00000000>;
 243 +                       };
 244 +
 245 +                       EMAC1: ethernet@ef600900 {
 246 +                               linux,network-index = <0x1>;
 247 +                               device_type = "network";
 248 +                               compatible = "ibm,emac-405ep", "ibm,emac";
 249 +                               interrupt-parent = <&UIC0>;
 250 +                               interrupts = <
 251 +                                       0x11 0x4 /* Ethernet */
 252 +                                       0x09 0x4 /* Ethernet Wake Up */>;
 253 +                               local-mac-address = [000000000000]; /* Filled in by zImage */
 254 +                               reg = <0xef600900 0x00000070>;
 255 +                               mal-device = <&MAL>;
 256 +                               mal-tx-channel = <2>;
 257 +                               mal-rx-channel = <1>;
 258 +                               cell-index = <1>;
 259 +                               max-frame-size = <0x5dc>;
 260 +                               rx-fifo-size = <0x1000>;
 261 +                               tx-fifo-size = <0x800>;
 262 +                               mdio-device = <&EMAC0>;
 263 +                               phy-mode = "mii";
 264 +                               phy-map = <0x00000001>;
 265 +                       };
 266 +
 267 +                       leds {
 268 +                               compatible = "gpio-leds";
 269 +                               user {
 270 +                                       label = "openrb:green:user";
 271 +                                       gpios = <&GPIO0 2 1>;
 272 +                               };
 273 +                       };
 274 +               };
 275 +
 276 +               EBC0: ebc {
 277 +                       compatible = "ibm,ebc-405ep", "ibm,ebc";
 278 +                       dcr-reg = <0x012 0x002>;
 279 +                       #address-cells = <2>;
 280 +                       #size-cells = <1>;
 281 +                       /* The ranges property is supplied by the bootwrapper
 282 +                        * and is based on the firmware's configuration of the
 283 +                        * EBC bridge
 284 +                        */
 285 +                       clock-frequency = <0>; /* Filled in by zImage */
 286 +
 287 +                       cf_card@ff100000 {
 288 +                               compatible = "magicbox-cf", "pata-magicbox-cf";
 289 +                               reg = <0x00000000 0xff100000 0x00001000
 290 +                                      0x00000000 0xff200000 0x00001000>;
 291 +                               interrupt-parent = <&UIC0>;
 292 +                               interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >;
 293 +                       };
 294 +
 295 +                       nor_flash@ff800000 {
 296 +                               compatible = "cfi-flash";
 297 +                               bank-width = <2>;
 298 +                               reg = <0x00000000 0xff800000 0x00800000>;
 299 +                               #address-cells = <1>;
 300 +                               #size-cells = <1>;
 301 +                               partition0@0 {
 302 +                                       label = "linux";
 303 +                                       reg = <0x0 0x140000>;
 304 +                               };
 305 +                               partition1@120000 {
 306 +                                       label = "rootfs";
 307 +                                       reg = <0x140000 0x680000>;
 308 +                               };
 309 +                               partition2@7c0000 {
 310 +                                       label = "u-boot";
 311 +                                       reg = <0x7c0000 0x30000>;
 312 +                                       read-only;
 313 +                               };
 314 +                               partition3@0 {
 315 +                                       label = "firmware";
 316 +                                       reg = <0x0 0x7c0000>;
 317 +                               };
 318 +                       };
 319 +               };
 320 +
 321 +               PCI0: pci@ec000000 {
 322 +                       device_type = "pci";
 323 +                       #interrupt-cells = <1>;
 324 +                       #size-cells = <2>;
 325 +                       #address-cells = <3>;
 326 +                       compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
 327 +                       primary;
 328 +                       reg = <0xeec00000 0x00000008    /* Config space access */
 329 +                              0xeed80000 0x00000004    /* IACK */
 330 +                              0xeed80000 0x00000004    /* Special cycle */
 331 +                              0xef480000 0x00000040>;  /* Internal registers */
 332 +
 333 +                       /* Outbound ranges, one memory and one IO,
 334 +                        * later cannot be changed. Chip supports a second
 335 +                        * IO range but we don't use it for now
 336 +                        */
 337 +                       ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
 338 +                                 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 339 +
 340 +                       /* Inbound 2GB range starting at 0 */
 341 +                       dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 342 +
 343 +                       interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 344 +                       interrupt-map = <
 345 +                               /* IDSEL 1 */
 346 +                               0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 347 +
 348 +                               /* IDSEL 2 */
 349 +                               0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
 350 +
 351 +                               /* IDSEL 3 */
 352 +                               0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
 353 +
 354 +                               /* IDSEL 4 */
 355 +                               0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
 356 +                       >;
 357 +               };
 358 +       };
 359 +
 360 +       chosen {
 361 +               linux,stdout-path = "/plb/opb/serial@ef600300";
 362 +       };
 363 +};
 364 --- a/arch/powerpc/boot/Makefile
 365 +++ b/arch/powerpc/boot/Makefile
 366 @@ -44,6 +44,7 @@ $(obj)/cuboot-taishan.o: BOOTCFLAGS += -
 367  $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
 368  $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 369  $(obj)/cuboot-magicbox.o: BOOTCFLAGS += -mcpu=405
 370 +$(obj)/cuboot-openrb.o: BOOTCFLAGS += -mcpu=405
 371  $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 372  $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 373
 374 @@ -78,7 +79,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82
 375                 cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 376                 virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
 377                 cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
 378 -               cuboot-magicbox.c
 379 +               cuboot-magicbox.c cuboot-openrb.c
 380  src-boot := $(src-wlib) $(src-plat) empty.c
 381
 382  src-boot := $(addprefix $(obj)/, $(src-boot))
 383 @@ -197,6 +198,7 @@ image-$(CONFIG_HOTFOOT)                     += cuImage.hot
 384  image-$(CONFIG_WALNUT)                 += treeImage.walnut
 385  image-$(CONFIG_ACADIA)                 += cuImage.acadia
 386  image-$(CONFIG_MAGICBOX)               += cuImage.magicbox
 387 +image-$(CONFIG_OPENRB)                 += cuImage.openrb
 388
 389  # Board ports in arch/powerpc/platform/44x/Kconfig
 390  image-$(CONFIG_EBONY)                  += treeImage.ebony cuImage.ebony
 391 --- a/arch/powerpc/platforms/40x/Kconfig
 392 +++ b/arch/powerpc/platforms/40x/Kconfig
 393 @@ -70,6 +70,16 @@ config MAGICBOX
 394         help
 395           This option enables support for the Magicbox boards.
 396
 397 +config OPENRB
 398 +       bool "OpenRB"
 399 +       depends on 40x
 400 +       default n
 401 +       select PPC40x_SIMPLE
 402 +       select 405EP
 403 +       select PCI
 404 +       help
 405 +         This option enables support for the OpenRB boards.
 406 +
 407  config MAKALU
 408         bool "Makalu"
 409         depends on 40x
 410 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c
 411 +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
 412 @@ -56,7 +56,8 @@ static char *board[] __initdata = {
 413         "amcc,kilauea",
 414         "amcc,makalu",
 415         "est,hotfoot",
 416 -       "magicbox"
 417 +       "magicbox",
 418 +       "openrb"
 419  };
 420
 421  static int __init ppc40x_probe(void)