ramips: disable sdhc for HC5661A
[oweals/openwrt.git] / target / linux / orion / patches-4.9 / 210-wn802t_support.patch
1 --- a/arch/arm/mach-orion5x/Kconfig
2 +++ b/arch/arm/mach-orion5x/Kconfig
3 @@ -159,10 +159,13 @@ config MACH_MSS2_DT
4           Maxtor Shared Storage II platform.
5  
6  config MACH_WNR854T
7 -       bool "Netgear WNR854T"
8 +       bool "Netgear WNR854T / WN802T"
9         help
10           Say 'Y' here if you want your kernel to support the
11 -         Netgear WNR854T platform.
12 +         Netgear WNR854T or WN802T platform.
13 +
14 +config MACH_WN802T
15 +       def_bool MACH_WNR854T
16  
17  config MACH_RD88F5181L_GE
18         bool "Marvell Orion-VoIP GE Reference Design"
19 --- a/arch/arm/mach-orion5x/wnr854t-setup.c
20 +++ b/arch/arm/mach-orion5x/wnr854t-setup.c
21 @@ -115,6 +115,15 @@ static struct dsa_platform_data __initda
22         .chip           = &wnr854t_switch_chip_data,
23  };
24  
25 +static struct dsa_chip_data wn802t_switch_chip_data = {
26 +       .port_names[2] = "wan",
27 +       .port_names[3] = "cpu",
28 +};
29 +
30 +static struct dsa_platform_data wn802t_switch_plat_data = {
31 +       .nr_chips       = 1,
32 +       .chip           = &wn802t_switch_chip_data,
33 +};
34  static void __init wnr854t_init(void)
35  {
36         /*
37 @@ -128,7 +137,10 @@ static void __init wnr854t_init(void)
38          * Configure peripherals.
39          */
40         orion5x_eth_init(&wnr854t_eth_data);
41 -       orion5x_eth_switch_init(&wnr854t_switch_plat_data);
42 +       if (machine_is_wn802t())
43 +               orion5x_eth_switch_init(&wn802t_switch_plat_data);
44 +       else
45 +               orion5x_eth_switch_init(&wnr854t_switch_plat_data);
46         orion5x_uart0_init();
47  
48         mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
49 @@ -168,7 +180,7 @@ static struct hw_pci wnr854t_pci __initd
50  
51  static int __init wnr854t_pci_init(void)
52  {
53 -       if (machine_is_wnr854t())
54 +       if (machine_is_wnr854t() || machine_is_wn802t())
55                 pci_common_init(&wnr854t_pci);
56  
57         return 0;
58 @@ -187,3 +199,15 @@ MACHINE_START(WNR854T, "Netgear WNR854T"
59         .fixup          = tag_fixup_mem32,
60         .restart        = orion5x_restart,
61  MACHINE_END
62 +
63 +MACHINE_START(WN802T, "Netgear WN802T")
64 +       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
65 +       .atag_offset    = 0x100,
66 +       .init_machine   = wnr854t_init,
67 +       .map_io         = orion5x_map_io,
68 +       .init_early     = orion5x_init_early,
69 +       .init_irq       = orion5x_init_irq,
70 +       .init_time      = orion5x_timer_init,
71 +       .fixup          = tag_fixup_mem32,
72 +       .restart        = orion5x_restart,
73 +MACHINE_END