target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch

   1 From a9f1c1d3e410596d0a39fd92562cc48ef960b1b7 Mon Sep 17 00:00:00 2001
   2 From: Li Yang <leoyang.li@nxp.com>
   3 Date: Fri, 5 Oct 2018 18:33:49 -0500
   4 Subject: [PATCH] ARM: dts: accumulated change
   5
   6 Signed-off-by: Li Yang <leoyang.li@nxp.com>
   7 ---
   8  arch/arm/boot/dts/ls1021a-qds.dts | 15 +++++++++++++++
   9  arch/arm/boot/dts/ls1021a-twr.dts | 15 +++++++++++++++
  10  arch/arm/boot/dts/ls1021a.dtsi    | 29 ++++++++++++++++++++++++-----
  11  3 files changed, 54 insertions(+), 5 deletions(-)
  12
  13 --- a/arch/arm/boot/dts/ls1021a-qds.dts
  14 +++ b/arch/arm/boot/dts/ls1021a-qds.dts
  15 @@ -126,6 +126,21 @@
  16         };
  17  };
  18
  19 +&qspi {
  20 +       num-cs = <2>;
  21 +       status = "okay";
  22 +
  23 +       qflash0: s25fl128s@0 {
  24 +               compatible = "spansion,m25p80";
  25 +               #address-cells = <1>;
  26 +               #size-cells = <1>;
  27 +               spi-max-frequency = <20000000>;
  28 +               reg = <0>;
  29 +               spi-rx-bus-width = <4>;
  30 +               spi-tx-bus-width = <4>;
  31 +       };
  32 +};
  33 +
  34  &enet0 {
  35         tbi-handle = <&tbi0>;
  36         phy-handle = <&sgmii_phy1c>;
  37 --- a/arch/arm/boot/dts/ls1021a-twr.dts
  38 +++ b/arch/arm/boot/dts/ls1021a-twr.dts
  39 @@ -144,6 +144,21 @@
  40         };
  41  };
  42
  43 +&qspi {
  44 +       num-cs = <2>;
  45 +       status = "okay";
  46 +
  47 +       qflash0: n25q128a13@0 {
  48 +               compatible = "n25q128a13", "jedec,spi-nor";
  49 +               #address-cells = <1>;
  50 +               #size-cells = <1>;
  51 +               spi-max-frequency = <20000000>;
  52 +               reg = <0>;
  53 +               spi-rx-bus-width = <4>;
  54 +               spi-tx-bus-width = <4>;
  55 +       };
  56 +};
  57 +
  58  &enet0 {
  59         tbi-handle = <&tbi0>;
  60         phy-handle = <&sgmii_phy2>;
  61 --- a/arch/arm/boot/dts/ls1021a.dtsi
  62 +++ b/arch/arm/boot/dts/ls1021a.dtsi
  63 @@ -167,12 +167,13 @@
  64                 ifc: ifc@1530000 {
  65                         compatible = "fsl,ifc", "simple-bus";
  66                         reg = <0x0 0x1530000 0x0 0x10000>;
  67 +                       big-endian;
  68                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
  69                 };
  70
  71                 dcfg: dcfg@1ee0000 {
  72                         compatible = "fsl,ls1021a-dcfg", "syscon";
  73 -                       reg = <0x0 0x1ee0000 0x0 0x10000>;
  74 +                       reg = <0x0 0x1ee0000 0x0 0x1000>;
  75                         big-endian;
  76                 };
  77
  78 @@ -371,7 +372,7 @@
  79                 };
  80
  81                 i2c0: i2c@2180000 {
  82 -                       compatible = "fsl,vf610-i2c";
  83 +                       compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
  84                         #address-cells = <1>;
  85                         #size-cells = <0>;
  86                         reg = <0x0 0x2180000 0x0 0x10000>;
  87 @@ -380,11 +381,12 @@
  88                         clocks = <&clockgen 4 1>;
  89                         dma-names = "tx", "rx";
  90                         dmas = <&edma0 1 39>, <&edma0 1 38>;
  91 +                       fsl-scl-gpio = <&gpio3 23 0>;
  92                         status = "disabled";
  93                 };
  94
  95                 i2c1: i2c@2190000 {
  96 -                       compatible = "fsl,vf610-i2c";
  97 +                       compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
  98                         #address-cells = <1>;
  99                         #size-cells = <0>;
 100                         reg = <0x0 0x2190000 0x0 0x10000>;
 101 @@ -393,6 +395,7 @@
 102                         clocks = <&clockgen 4 1>;
 103                         dma-names = "tx", "rx";
 104                         dmas = <&edma0 1 37>, <&edma0 1 36>;
 105 +                       fsl-scl-gpio = <&gpio3 23 0>;
 106                         status = "disabled";
 107                 };
 108
 109 @@ -579,6 +582,16 @@
 110                         status = "disabled";
 111                 };
 112
 113 +               ftm0: ftm0@29d0000 {
 114 +                       compatible = "fsl,ftm-alarm";
 115 +                       reg = <0x0 0x29d0000 0x0 0x10000>,
 116 +                             <0x0 0x1ee2140 0x0 0x4>;
 117 +                       reg-names = "ftm", "FlexTimer1";
 118 +                       interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 119 +                       big-endian;
 120 +                       status = "okay";
 121 +               };
 122 +
 123                 pwm1: pwm@29e0000 {
 124                         compatible = "fsl,vf610-ftm-pwm";
 125                         #pwm-cells = <3>;
 126 @@ -861,6 +874,8 @@
 127                         dr_mode = "host";
 128                         snps,quirk-frame-length-adjustment = <0x20>;
 129                         snps,dis_rxdet_inp3_quirk;
 130 +                       usb3-lpm-capable;
 131 +                       snps,dis-u1u2-when-u3-quirk;
 132                         snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 133                 };
 134
 135 @@ -869,7 +884,9 @@
 136                         reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
 137                                0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 138                         reg-names = "regs", "config";
 139 -                       interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 140 +                       interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
 141 +                                          <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 142 +                       interrupt-names = "pme", "aer";
 143                         fsl,pcie-scfg = <&scfg 0>;
 144                         #address-cells = <3>;
 145                         #size-cells = <2>;
 146 @@ -893,7 +910,9 @@
 147                         reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
 148                                0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 149                         reg-names = "regs", "config";
 150 -                       interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 151 +                       interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
 152 +                                          <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
 153 +                       interrupt-names = "pme", "aer";
 154                         fsl,pcie-scfg = <&scfg 1>;
 155                         #address-cells = <3>;
 156                         #size-cells = <2>;