target/linux/layerscape/patches-5.4/302-dts-0007-arm64-dts-ls1043a-accumulated-change-for-ls1043a-boa.patch

   1 From 794b9e55c77bf0ef34dfdb3b151a845c004b3ce3 Mon Sep 17 00:00:00 2001
   2 From: Li Yang <leoyang.li@nxp.com>
   3 Date: Thu, 2 May 2019 16:01:01 -0500
   4 Subject: [PATCH] arm64: dts: ls1043a: accumulated change for ls1043a boards
   5
   6 commit 118e2f48ee8da3f5547c24888bd6fdb78f03b7ce
   7 Author: Peng Ma <peng.ma@nxp.com>
   8 Date:   Wed Jul 25 08:53:07 2018 +0000
   9
  10     dts: fsl-ls1021a, fsl-ls1043a, fsl-ls1046a: add multi block node
  11 support
  12
  13     add block-offset to support different virtual block offset for qdma
  14     base on soc;
  15     the interrupt named "qdma-queueN(N:0,1,2,3)" correspond to a virtual
  16     block,N based on block number of qdma;
  17
  18     Signed-off-by: Peng Ma <peng.ma@nxp.com>
  19
  20 Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
  21 Date:   Mon Apr 2 16:22:40 2018 +0800
  22
  23     arm64: dts: ls1043a: add dts entry for A-010650
  24
  25     Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
  26
  27 commit a47e4bd0b5d076feb6d81601c16d5b79e53a92c8
  28 Author: Rajesh Bhagat <rajesh.bhagat@freescale.com>
  29 Date:   Wed Jan 27 11:37:25 2016 +0530
  30
  31     arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
  32
  33     Add "configure-gfladj" boolean property to USB3 node. This property
  34     is used to determine whether frame length adjustent is required
  35     or not
  36
  37     Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
  38     Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
  39
  40 commit 38566bbd5ca6747b30d2f0c251bbcfe0723df8c6
  41 Author: Changming Huang <jerry.huang@nxp.com>
  42 Date:   Wed Apr 19 12:49:50 2017 +0800
  43
  44     arm/arm64: dts: Add property snps incr burst type adjustment for
  45 INCR burst type for dwc3
  46
  47     Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
  48     Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
  49
  50 commit 8632d84e0fe187aa023a24f0dad0040c53e12450
  51 Author: Abhimanyu Saini <abhimanyu.saini@nxp.com>
  52 Date:   Thu Jan 25 11:31:13 2018 +0530
  53
  54     arm64: dts: freescale: ls1043a: Modify DT nodes for qspi
  55
  56     Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
  57
  58 commit b1dc1ebed79e9aaab75fd06837d794ec2f1b624d
  59 Author: Ran Wang <ran.wang_1@nxp.com>
  60 Date:   Fri Jan 5 15:14:48 2018 +0800
  61
  62     arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
  63
  64     Enable USB3 HW LPM feature for ls1043a and active patch for
  65     snps erratum A-010131. It will disable U1/U2 temperary when
  66     initiate U3 request.
  67
  68     Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
  69
  70 commit 9b17a5fcf8da5656ff99ebef3d63ba040e9f676d
  71 Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
  72 Date:   Tue Jun 13 13:14:26 2017 +0800
  73
  74     arm64: dts: correct the register range of dcfg
  75
  76     Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
  77
  78 commit f60e39fd51ad702e3a2613faaca40871a4763735
  79 Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
  80 Date:   Tue Aug 22 18:04:02 2017 +0800
  81
  82     arm64: dts: ls1043a: add pcf85263 rtc nodes
  83
  84     Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
  85
  86 commit 67c82e3c7b376139d7cee624589bedbc311f8868
  87 Author: jiaheng.fan <jiaheng.fan@nxp.com>
  88 Date:   Thu May 11 17:36:33 2017 +0800
  89
  90     arm64: dts: ls1021/ls1043/ls1046: add qdma nodes
  91     Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
  92
  93 commit c6d9c2498ee83669f9853100301edff9a5905caf
  94 Author: Wang Dongsheng <dongsheng.wang@nxp.com>
  95 Date:   Fri Apr 21 13:26:07 2017 +0800
  96
  97     arm64: dts: ls1043a: add ftm0 nodes
  98
  99     Add rcpm and ftm0 nodes. The Power Management related features
 100     need these nodes.
 101
 102     Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
 103
 104 commit 3bcdc4de0a1c9e6f4a4ddc916e8efe8044d8bbfd
 105 Author: Po Liu <po.liu@nxp.com>
 106 Date:   Fri Sep 30 17:11:36 2016 +0800
 107
 108     arm64: dts: ls1043/ls2080: add pcie aer/pme interrupt-name property
 109
 110     Some platforms(NXP Layerscape for example) aer/pme interrupts was
 111 not
 112     MSI/MSI-X/INTx but using interrupt line independently. This patch
 113     add "aer", "pme" interrupt-names for aer/pme interrupt.
 114
 115     With the interrupt-names "aer", "pme" code could probe aer/pme
 116 interrupt
 117     line for pcie root port, replace the aer/pme interrupt service irqs.
 118
 119     This is intend to fixup the Layerscape platforms which aer/pmes
 120 interrupts
 121     was not MSI/MSI-X/INTx, but using interrupt line independently.
 122
 123     Since the interrupt-names "intr" never been used. Remove it.
 124
 125     Signed-off-by: Po Liu <po.liu@nxp.com>
 126     Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
 127
 128 commit 4d20ecf029f1255520b30c103e1724c618b981c7
 129 Author: Zhao Qiang <qiang.zhao@nxp.com>
 130 Date:   Sun Jun 12 15:51:44 2016 +0800
 131
 132     arm64: dts: ls1043ardb: add ds26522 node
 133
 134     add ds26522 node to fsl-ls1043a-rdb.dts
 135
 136     Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
 137
 138 commit ca470562646ab058814fc4a1195016fb3266cdf5
 139 Author: Zhao Qiang <qiang.zhao@nxp.com>
 140 Date:   Sun Jun 12 15:44:11 2016 +0800
 141
 142     arm64: dts: ls1043ardb: add qe node
 143
 144     Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
 145 ---
 146  arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 162 ++++++++++++++++++++++
 147  arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts |  36 +++++
 148  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 108 +++++++++++++--
 149  3 files changed, 295 insertions(+), 11 deletions(-)
 150
 151 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
 152 +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
 153 @@ -24,6 +24,22 @@
 154                 serial1 = &duart1;
 155                 serial2 = &duart2;
 156                 serial3 = &duart3;
 157 +               sgmii_riser_s1_p1 = &sgmii_phy_s1_p1;
 158 +               sgmii_riser_s2_p1 = &sgmii_phy_s2_p1;
 159 +               sgmii_riser_s3_p1 = &sgmii_phy_s3_p1;
 160 +               sgmii_riser_s4_p1 = &sgmii_phy_s4_p1;
 161 +               qsgmii_s1_p1 = &qsgmii_phy_s1_p1;
 162 +               qsgmii_s1_p2 = &qsgmii_phy_s1_p2;
 163 +               qsgmii_s1_p3 = &qsgmii_phy_s1_p3;
 164 +               qsgmii_s1_p4 = &qsgmii_phy_s1_p4;
 165 +               qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
 166 +               qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
 167 +               qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
 168 +               qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
 169 +               emi1_slot1 = &ls1043mdio_s1;
 170 +               emi1_slot2 = &ls1043mdio_s2;
 171 +               emi1_slot3 = &ls1043mdio_s3;
 172 +               emi1_slot4 = &ls1043mdio_s4;
 173         };
 174
 175         chosen {
 176 @@ -64,6 +80,8 @@
 177         fpga: board-control@2,0 {
 178                 compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
 179                 reg = <0x2 0x0 0x0000100>;
 180 +               #address-cells = <1>;
 181 +               #size-cells = <1>;
 182         };
 183  };
 184
 185 @@ -149,3 +167,147 @@
 186  };
 187
 188  #include "fsl-ls1043-post.dtsi"
 189 +
 190 +&fman0 {
 191 +       ethernet@e0000 {
 192 +               phy-handle = <&qsgmii_phy_s2_p1>;
 193 +               phy-connection-type = "sgmii";
 194 +       };
 195 +
 196 +       ethernet@e2000 {
 197 +               phy-handle = <&qsgmii_phy_s2_p2>;
 198 +               phy-connection-type = "sgmii";
 199 +       };
 200 +
 201 +       ethernet@e4000 {
 202 +               phy-handle = <&rgmii_phy1>;
 203 +               phy-connection-type = "rgmii";
 204 +       };
 205 +
 206 +       ethernet@e6000 {
 207 +               phy-handle = <&rgmii_phy2>;
 208 +               phy-connection-type = "rgmii";
 209 +       };
 210 +
 211 +       ethernet@e8000 {
 212 +               phy-handle = <&qsgmii_phy_s2_p3>;
 213 +               phy-connection-type = "sgmii";
 214 +       };
 215 +
 216 +       ethernet@ea000 {
 217 +               phy-handle = <&qsgmii_phy_s2_p4>;
 218 +               phy-connection-type = "sgmii";
 219 +       };
 220 +
 221 +       ethernet@f0000 { /* DTSEC9/10GEC1 */
 222 +               fixed-link = <1 1 10000 0 0>;
 223 +               phy-connection-type = "xgmii";
 224 +       };
 225 +};
 226 +
 227 +&fpga {
 228 +       mdio-mux-emi1 {
 229 +               compatible = "mdio-mux-mmioreg", "mdio-mux";
 230 +               mdio-parent-bus = <&mdio0>;
 231 +               #address-cells = <1>;
 232 +               #size-cells = <0>;
 233 +               reg = <0x54 1>;    /* BRDCFG4 */
 234 +               mux-mask = <0xe0>; /* EMI1 */
 235 +
 236 +               /* On-board RGMII1 PHY */
 237 +               ls1043mdio0: mdio@0 {
 238 +                       reg = <0>;
 239 +                       #address-cells = <1>;
 240 +                       #size-cells = <0>;
 241 +
 242 +                       rgmii_phy1: ethernet-phy@1 { /* MAC3 */
 243 +                               reg = <0x1>;
 244 +                       };
 245 +               };
 246 +
 247 +               /* On-board RGMII2 PHY */
 248 +               ls1043mdio1: mdio@1 {
 249 +                       reg = <0x20>;
 250 +                       #address-cells = <1>;
 251 +                       #size-cells = <0>;
 252 +
 253 +                       rgmii_phy2: ethernet-phy@2 { /* MAC4 */
 254 +                               reg = <0x2>;
 255 +                       };
 256 +               };
 257 +
 258 +               /* Slot 1 */
 259 +               ls1043mdio_s1: mdio@2 {
 260 +                       reg = <0x40>;
 261 +                       #address-cells = <1>;
 262 +                       #size-cells = <0>;
 263 +                       status = "disabled";
 264 +
 265 +                       qsgmii_phy_s1_p1: ethernet-phy@4 {
 266 +                               reg = <0x4>;
 267 +                       };
 268 +                       qsgmii_phy_s1_p2: ethernet-phy@5 {
 269 +                               reg = <0x5>;
 270 +                       };
 271 +                       qsgmii_phy_s1_p3: ethernet-phy@6 {
 272 +                               reg = <0x6>;
 273 +                       };
 274 +                       qsgmii_phy_s1_p4: ethernet-phy@7 {
 275 +                               reg = <0x7>;
 276 +                       };
 277 +
 278 +                       sgmii_phy_s1_p1: ethernet-phy@1c {
 279 +                               reg = <0x1c>;
 280 +                       };
 281 +               };
 282 +
 283 +               /* Slot 2 */
 284 +               ls1043mdio_s2: mdio@3 {
 285 +                       reg = <0x60>;
 286 +                       #address-cells = <1>;
 287 +                       #size-cells = <0>;
 288 +                       status = "disabled";
 289 +
 290 +                       qsgmii_phy_s2_p1: ethernet-phy@8 {
 291 +                               reg = <0x8>;
 292 +                       };
 293 +                       qsgmii_phy_s2_p2: ethernet-phy@9 {
 294 +                               reg = <0x9>;
 295 +                       };
 296 +                       qsgmii_phy_s2_p3: ethernet-phy@a {
 297 +                               reg = <0xa>;
 298 +                       };
 299 +                       qsgmii_phy_s2_p4: ethernet-phy@b {
 300 +                               reg = <0xb>;
 301 +                       };
 302 +
 303 +                       sgmii_phy_s2_p1: ethernet-phy@1c {
 304 +                               reg = <0x1c>;
 305 +                       };
 306 +               };
 307 +
 308 +               /* Slot 3 */
 309 +               ls1043mdio_s3: mdio@4 {
 310 +                       reg = <0x80>;
 311 +                       #address-cells = <1>;
 312 +                       #size-cells = <0>;
 313 +                       status = "disabled";
 314 +
 315 +                       sgmii_phy_s3_p1: ethernet-phy@1c {
 316 +                               reg = <0x1c>;
 317 +                       };
 318 +               };
 319 +
 320 +               /* Slot 4 */
 321 +               ls1043mdio_s4: mdio@5 {
 322 +                       reg = <0xa0>;
 323 +                       #address-cells = <1>;
 324 +                       #size-cells = <0>;
 325 +                       status = "disabled";
 326 +
 327 +                       sgmii_phy_s4_p1: ethernet-phy@1c {
 328 +                               reg = <0x1c>;
 329 +                       };
 330 +               };
 331 +       };
 332 +};
 333 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
 334 +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
 335 @@ -49,6 +49,10 @@
 336                 compatible = "pericom,pt7c4338";
 337                 reg = <0x68>;
 338         };
 339 +       rtc@51 {
 340 +               compatible = "nxp,pcf85263";
 341 +               reg = <0x51>;
 342 +       };
 343  };
 344
 345  &ifc {
 346 @@ -94,6 +98,38 @@
 347                 reg = <0>;
 348                 spi-max-frequency = <1000000>; /* input clock */
 349         };
 350 +
 351 +       slic@2 {
 352 +               compatible = "maxim,ds26522";
 353 +               reg = <2>;
 354 +               spi-max-frequency = <2000000>;
 355 +               fsl,spi-cs-sck-delay = <100>;
 356 +               fsl,spi-sck-cs-delay = <50>;
 357 +       };
 358 +
 359 +       slic@3 {
 360 +               compatible = "maxim,ds26522";
 361 +               reg = <3>;
 362 +               spi-max-frequency = <2000000>;
 363 +               fsl,spi-cs-sck-delay = <100>;
 364 +               fsl,spi-sck-cs-delay = <50>;
 365 +       };
 366 +};
 367 +
 368 +&uqe {
 369 +       ucc_hdlc: ucc@2000 {
 370 +               compatible = "fsl,ucc-hdlc";
 371 +               rx-clock-name = "clk8";
 372 +               tx-clock-name = "clk9";
 373 +               fsl,rx-sync-clock = "rsync_pin";
 374 +               fsl,tx-sync-clock = "tsync_pin";
 375 +               fsl,tx-timeslot-mask = <0xfffffffe>;
 376 +               fsl,rx-timeslot-mask = <0xfffffffe>;
 377 +               fsl,tdm-framer-type = "e1";
 378 +               fsl,tdm-id = <0>;
 379 +               fsl,siram-entry-id = <0>;
 380 +               fsl,tdm-interface;
 381 +       };
 382  };
 383
 384  &duart0 {
 385 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
 386 +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
 387 @@ -277,7 +277,7 @@
 388
 389                 dcfg: dcfg@1ee0000 {
 390                         compatible = "fsl,ls1043a-dcfg", "syscon";
 391 -                       reg = <0x0 0x1ee0000 0x0 0x10000>;
 392 +                       reg = <0x0 0x1ee0000 0x0 0x1000>;
 393                         big-endian;
 394                 };
 395
 396 @@ -411,7 +411,7 @@
 397                 };
 398
 399                 i2c0: i2c@2180000 {
 400 -                       compatible = "fsl,vf610-i2c";
 401 +                       compatible = "fsl,vf610-i2c", "fsl,ls1043a-vf610-i2c";
 402                         #address-cells = <1>;
 403                         #size-cells = <0>;
 404                         reg = <0x0 0x2180000 0x0 0x10000>;
 405 @@ -421,6 +421,7 @@
 406                         dmas = <&edma0 1 39>,
 407                                <&edma0 1 38>;
 408                         dma-names = "tx", "rx";
 409 +                       scl-gpios = <&gpio4 12 0>;
 410                         status = "disabled";
 411                 };
 412
 413 @@ -525,6 +526,72 @@
 414                         #interrupt-cells = <2>;
 415                 };
 416
 417 +               uqe: uqe@2400000 {
 418 +                       #address-cells = <1>;
 419 +                       #size-cells = <1>;
 420 +                       device_type = "qe";
 421 +                       compatible = "fsl,qe", "simple-bus";
 422 +                       ranges = <0x0 0x0 0x2400000 0x40000>;
 423 +                       reg = <0x0 0x2400000 0x0 0x480>;
 424 +                       brg-frequency = <100000000>;
 425 +                       bus-frequency = <200000000>;
 426 +
 427 +                       fsl,qe-num-riscs = <1>;
 428 +                       fsl,qe-num-snums = <28>;
 429 +
 430 +                       qeic: qeic@80 {
 431 +                               compatible = "fsl,qe-ic";
 432 +                               reg = <0x80 0x80>;
 433 +                               #address-cells = <0>;
 434 +                               interrupt-controller;
 435 +                               #interrupt-cells = <1>;
 436 +                               interrupts = <0 77 0x04 0 77 0x04>;
 437 +                       };
 438 +
 439 +                       si1: si@700 {
 440 +                               #address-cells = <1>;
 441 +                               #size-cells = <0>;
 442 +                               compatible = "fsl,ls1043-qe-si",
 443 +                                               "fsl,t1040-qe-si";
 444 +                               reg = <0x700 0x80>;
 445 +                       };
 446 +
 447 +                       siram1: siram@1000 {
 448 +                               #address-cells = <1>;
 449 +                               #size-cells = <1>;
 450 +                               compatible = "fsl,ls1043-qe-siram",
 451 +                                               "fsl,t1040-qe-siram";
 452 +                               reg = <0x1000 0x800>;
 453 +                       };
 454 +
 455 +                       ucc@2000 {
 456 +                               cell-index = <1>;
 457 +                               reg = <0x2000 0x200>;
 458 +                               interrupts = <32>;
 459 +                               interrupt-parent = <&qeic>;
 460 +                       };
 461 +
 462 +                       ucc@2200 {
 463 +                               cell-index = <3>;
 464 +                               reg = <0x2200 0x200>;
 465 +                               interrupts = <34>;
 466 +                               interrupt-parent = <&qeic>;
 467 +                       };
 468 +
 469 +                       muram@10000 {
 470 +                               #address-cells = <1>;
 471 +                               #size-cells = <1>;
 472 +                               compatible = "fsl,qe-muram", "fsl,cpm-muram";
 473 +                               ranges = <0x0 0x10000 0x6000>;
 474 +
 475 +                               data-only@0 {
 476 +                                       compatible = "fsl,qe-muram-data",
 477 +                                       "fsl,cpm-muram-data";
 478 +                                       reg = <0x0 0x6000>;
 479 +                               };
 480 +                       };
 481 +               };
 482 +
 483                 lpuart0: serial@2950000 {
 484                         compatible = "fsl,ls1021a-lpuart";
 485                         reg = <0x0 0x2950000 0x0 0x1000>;
 486 @@ -579,6 +646,16 @@
 487                         status = "disabled";
 488                 };
 489
 490 +               ftm0: ftm0@29d0000 {
 491 +                       compatible = "fsl,ftm-alarm";
 492 +                       reg = <0x0 0x29d0000 0x0 0x10000>,
 493 +                             <0x0 0x1ee2140 0x0 0x4>;
 494 +                       reg-names = "ftm", "FlexTimer1";
 495 +                       interrupts = <0 86 0x4>;
 496 +                       big-endian;
 497 +                       status = "okay";
 498 +               };
 499 +
 500                 wdog0: wdog@2ad0000 {
 501                         compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
 502                         reg = <0x0 0x2ad0000 0x0 0x10000>;
 503 @@ -611,7 +688,10 @@
 504                         dr_mode = "host";
 505                         snps,quirk-frame-length-adjustment = <0x20>;
 506                         snps,dis_rxdet_inp3_quirk;
 507 +                       usb3-lpm-capable;
 508 +                       snps,dis-u1u2-when-u3-quirk;
 509                         snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 510 +                       configure-gfladj;
 511                 };
 512
 513                 usb1: usb3@3000000 {
 514 @@ -621,7 +701,10 @@
 515                         dr_mode = "host";
 516                         snps,quirk-frame-length-adjustment = <0x20>;
 517                         snps,dis_rxdet_inp3_quirk;
 518 +                       usb3-lpm-capable;
 519 +                       snps,dis-u1u2-when-u3-quirk;
 520                         snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 521 +                       configure-gfladj;
 522                 };
 523
 524                 usb2: usb3@3100000 {
 525 @@ -631,7 +714,10 @@
 526                         dr_mode = "host";
 527                         snps,quirk-frame-length-adjustment = <0x20>;
 528                         snps,dis_rxdet_inp3_quirk;
 529 +                       usb3-lpm-capable;
 530 +                       snps,dis-u1u2-when-u3-quirk;
 531                         snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 532 +                       configure-gfladj;
 533                 };
 534
 535                 sata: sata@3200000 {
 536 @@ -670,9 +756,9 @@
 537                         reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
 538                                0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 539                         reg-names = "regs", "config";
 540 -                       interrupts = <0 118 0x4>, /* controller interrupt */
 541 -                                    <0 117 0x4>; /* PME interrupt */
 542 -                       interrupt-names = "intr", "pme";
 543 +                       interrupts = <0 117 0x4>, /* PME interrupt */
 544 +                                    <0 118 0x4>; /* aer interrupt */
 545 +                       interrupt-names = "pme", "aer";
 546                         #address-cells = <3>;
 547                         #size-cells = <2>;
 548                         device_type = "pci";
 549 @@ -696,9 +782,9 @@
 550                         reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
 551                                0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 552                         reg-names = "regs", "config";
 553 -                       interrupts = <0 128 0x4>,
 554 -                                    <0 127 0x4>;
 555 -                       interrupt-names = "intr", "pme";
 556 +                       interrupts = <0 127 0x4>,
 557 +                                    <0 128 0x4>;
 558 +                       interrupt-names = "pme", "aer";
 559                         #address-cells = <3>;
 560                         #size-cells = <2>;
 561                         device_type = "pci";
 562 @@ -722,9 +808,9 @@
 563                         reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
 564                                0x50 0x00000000 0x0 0x00002000>; /* configuration space */
 565                         reg-names = "regs", "config";
 566 -                       interrupts = <0 162 0x4>,
 567 -                                    <0 161 0x4>;
 568 -                       interrupt-names = "intr", "pme";
 569 +                       interrupts = <0 161 0x4>,
 570 +                                    <0 162 0x4>;
 571 +                       interrupt-names = "pme", "aer";
 572                         #address-cells = <3>;
 573                         #size-cells = <2>;
 574                         device_type = "pci";