lantiq: drop orphaned eeprom-handling code branches
[oweals/openwrt.git] / target / linux / lantiq / patches-4.4 / 0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
1 From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001
2 From: John Crispin <blogic@openwrt.org>
3 Date: Wed, 10 Sep 2014 22:42:14 +0200
4 Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
5
6 Signed-off-by: John Crispin <blogic@openwrt.org>
7 ---
8  arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h  |    6 +
9  .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    3 +
10  arch/mips/lantiq/xway/Makefile                     |    3 +
11  arch/mips/lantiq/xway/ath_eep.c                    |  282 ++++++++++++++++++++
12  arch/mips/lantiq/xway/eth_mac.c                    |   76 ++++++
13  arch/mips/lantiq/xway/pci-ath-fixup.c              |  109 ++++++++
14  arch/mips/lantiq/xway/rt_eep.c                     |   60 +++++
15  7 files changed, 539 insertions(+)
16  create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
17  create mode 100644 arch/mips/lantiq/xway/ath_eep.c
18  create mode 100644 arch/mips/lantiq/xway/eth_mac.c
19  create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
20  create mode 100644 arch/mips/lantiq/xway/rt_eep.c
21
22 --- /dev/null
23 +++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
24 @@ -0,0 +1,6 @@
25 +#ifndef _PCI_ATH_FIXUP
26 +#define _PCI_ATH_FIXUP
27 +
28 +void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
29 +
30 +#endif /* _PCI_ATH_FIXUP */
31 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
32 +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
33 @@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev,
34  extern void ltq_pmu_enable(unsigned int module);
35  extern void ltq_pmu_disable(unsigned int module);
36  
37 +/* allow the ethernet driver to load a flash mapped mac addr */
38 +const u8* ltq_get_eth_mac(void);
39 +
40  #endif /* CONFIG_SOC_TYPE_XWAY */
41  #endif /* _LTQ_XWAY_H__ */
42 --- a/arch/mips/lantiq/xway/Makefile
43 +++ b/arch/mips/lantiq/xway/Makefile
44 @@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o
45  
46  obj-y += vmmc.o tffs.o
47  
48 +obj-y += eth_mac.o
49 +obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
50 +
51  obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
52 --- /dev/null
53 +++ b/arch/mips/lantiq/xway/ath_eep.c
54 @@ -0,0 +1,281 @@
55 +/*
56 + *  Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
57 + *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
58 + *  Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
59 + *  Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
60 + *  Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
61 + *  Copyright (C) 2015 Vittorio Gambaletta <openwrt@vittgam.net>
62 + *
63 + *  This program is free software; you can redistribute it and/or modify it
64 + *  under the terms of the GNU General Public License version 2 as published
65 + *  by the Free Software Foundation.
66 + */
67 +
68 +#include <linux/init.h>
69 +#include <linux/module.h>
70 +#include <linux/platform_device.h>
71 +#include <linux/etherdevice.h>
72 +#include <linux/ath5k_platform.h>
73 +#include <linux/ath9k_platform.h>
74 +#include <linux/pci.h>
75 +#include <linux/err.h>
76 +#include <linux/mtd/mtd.h>
77 +#include <pci-ath-fixup.h>
78 +#include <lantiq_soc.h>
79 +
80 +extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
81 +struct ath5k_platform_data ath5k_pdata;
82 +struct ath9k_platform_data ath9k_pdata = {
83 +       .led_pin = -1,
84 +};
85 +static u8 athxk_eeprom_mac[6];
86 +
87 +static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
88 +{
89 +       dev->dev.platform_data = &ath9k_pdata;
90 +       return 0;
91 +}
92 +
93 +static int ath9k_eep_load;
94 +int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
95 +{
96 +       struct device_node *np = pdev->dev.of_node, *mtd_np = NULL;
97 +       int mac_offset, led_pin;
98 +       u32 mac_inc = 0, pci_slot = 0;
99 +       int i;
100 +       struct mtd_info *the_mtd;
101 +       size_t flash_readlen;
102 +       const __be32 *list;
103 +       const char *part;
104 +       phandle phandle;
105 +       u16 dev_ids[2] = { 0 };
106 +
107 +       list = of_get_property(np, "ath,eep-flash", &i);
108 +       if (!list || (i != (2 * sizeof(*list))))
109 +               return -ENODEV;
110 +
111 +       phandle = be32_to_cpup(list++);
112 +       if (phandle)
113 +               mtd_np = of_find_node_by_phandle(phandle);
114 +
115 +       if (!mtd_np)
116 +               return -ENODEV;
117 +
118 +       part = of_get_property(mtd_np, "label", NULL);
119 +       if (!part)
120 +               part = mtd_np->name;
121 +
122 +       the_mtd = get_mtd_device_nm(part);
123 +       if (IS_ERR(the_mtd))
124 +               return -ENODEV;
125 +
126 +       i = mtd_read(the_mtd, be32_to_cpup(list), ATH9K_PLAT_EEP_MAX_WORDS << 1,
127 +               &flash_readlen, (void *) ath9k_pdata.eeprom_data);
128 +
129 +       if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
130 +               size_t mac_readlen;
131 +               mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
132 +                       (void *) athxk_eeprom_mac);
133 +       }
134 +       put_mtd_device(the_mtd);
135 +
136 +       if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) {
137 +               dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
138 +               return -ENODEV;
139 +       }
140 +
141 +       if (of_find_property(np, "ath,eep-swap", NULL))
142 +               for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++)
143 +                       ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
144 +
145 +       if (of_find_property(np, "ath,eep-endian", NULL)) {
146 +               ath9k_pdata.endian_check = true;
147 +
148 +               dev_info(&pdev->dev, "endian check enabled.\n");
149 +       }
150 +
151 +       if (!is_valid_ether_addr(athxk_eeprom_mac) && ltq_get_eth_mac())
152 +               memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
153 +
154 +       if (!is_valid_ether_addr(athxk_eeprom_mac)) {
155 +               dev_warn(&pdev->dev, "using random mac\n");
156 +               random_ether_addr(athxk_eeprom_mac);
157 +       }
158 +
159 +       if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
160 +               athxk_eeprom_mac[5] += mac_inc;
161 +
162 +       ath9k_pdata.macaddr = athxk_eeprom_mac;
163 +       ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
164 +
165 +       if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
166 +               ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
167 +
168 +               dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
169 +                if (ath9k_eep_load) {
170 +                        struct pci_dev *d = NULL;
171 +                        while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
172 +                                        PCI_ANY_ID, d)) != NULL)
173 +                                pci_fixup_device(pci_fixup_early, d);
174 +                }
175 +
176 +       }
177 +
178 +       if (!of_property_read_u16_array(np, "ath,device-id", dev_ids, 2)) {
179 +               struct pci_dev *d = NULL;
180 +
181 +               while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS,
182 +                                          dev_ids[0], d)) != NULL)
183 +                       d->device = dev_ids[1];
184 +       }
185 +
186 +       if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) {
187 +               ath9k_pdata.led_pin = led_pin;
188 +               dev_info(&pdev->dev, "using led pin %d.\n", led_pin);
189 +       }
190 +
191 +       if (of_property_read_bool(np, "ath,led-active-high")) {
192 +               ath9k_pdata.led_active_high = true;
193 +               dev_info(&pdev->dev, "inverted LED polarity\n");
194 +       }
195 +
196 +       if (of_property_read_bool(np, "ath,disable-2ghz")) {
197 +               ath9k_pdata.disable_2ghz = true;
198 +               dev_info(&pdev->dev, "disabled 2.4 GHz band\n");
199 +       }
200 +
201 +       if (of_property_read_bool(np, "ath,disable-5ghz")) {
202 +               ath9k_pdata.disable_5ghz = true;
203 +               dev_info(&pdev->dev, "disabled 5 GHz band\n");
204 +       }
205 +
206 +       dev_info(&pdev->dev, "loaded ath9k eeprom\n");
207 +
208 +       return 0;
209 +}
210 +
211 +static struct of_device_id ath9k_eeprom_ids[] = {
212 +       { .compatible = "ath9k,eeprom" },
213 +       { }
214 +};
215 +
216 +static struct platform_driver ath9k_eeprom_driver = {
217 +       .driver         = {
218 +               .name           = "ath9k,eeprom",
219 +               .owner  = THIS_MODULE,
220 +               .of_match_table = of_match_ptr(ath9k_eeprom_ids),
221 +       },
222 +};
223 +
224 +static int __init of_ath9k_eeprom_init(void)
225 +{
226 +        int ret = platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
227 +
228 +        if (ret)
229 +                ath9k_eep_load = 1;
230 +
231 +        return ret;
232 +}
233 +
234 +static int __init of_ath9k_eeprom_init_late(void)
235 +{
236 +        if (!ath9k_eep_load)
237 +                return 0;
238 +        return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
239 +}
240 +late_initcall(of_ath9k_eeprom_init_late);
241 +subsys_initcall(of_ath9k_eeprom_init);
242 +
243 +
244 +static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
245 +{
246 +       dev->dev.platform_data = &ath5k_pdata;
247 +       return 0;
248 +}
249 +
250 +int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
251 +{
252 +       struct device_node *np = pdev->dev.of_node, *mtd_np = NULL;
253 +       int mac_offset;
254 +       u32 mac_inc = 0;
255 +       int i;
256 +       struct mtd_info *the_mtd;
257 +       size_t flash_readlen;
258 +       const __be32 *list;
259 +       const char *part;
260 +       phandle phandle;
261 +
262 +       list = of_get_property(np, "ath,eep-flash", &i);
263 +       if (!list || (i != (2 * sizeof(*list))))
264 +               return -ENODEV;
265 +
266 +       phandle = be32_to_cpup(list++);
267 +       if (phandle)
268 +               mtd_np = of_find_node_by_phandle(phandle);
269 +
270 +       if (!mtd_np)
271 +               return -ENODEV;
272 +
273 +       part = of_get_property(mtd_np, "label", NULL);
274 +       if (!part)
275 +               part = mtd_np->name;
276 +
277 +       the_mtd = get_mtd_device_nm(part);
278 +       if (IS_ERR(the_mtd))
279 +               return -ENODEV;
280 +
281 +       i = mtd_read(the_mtd, be32_to_cpup(list), ATH5K_PLAT_EEP_MAX_WORDS << 1,
282 +               &flash_readlen, (void *) ath5k_pdata.eeprom_data);
283 +
284 +       put_mtd_device(the_mtd);
285 +
286 +       if ((sizeof(ATH5K_PLAT_EEP_MAX_WORDS << 1) != flash_readlen)
287 +                       || i) {
288 +               dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
289 +               return -ENODEV;
290 +       }
291 +
292 +       if (of_find_property(np, "ath,eep-swap", NULL))
293 +               for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
294 +                       ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
295 +
296 +       if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset))
297 +               memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6);
298 +
299 +       if (!is_valid_ether_addr(athxk_eeprom_mac) && ltq_get_eth_mac())
300 +               memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6);
301 +
302 +       if (!is_valid_ether_addr(athxk_eeprom_mac)) {
303 +               dev_warn(&pdev->dev, "using random mac\n");
304 +               random_ether_addr(athxk_eeprom_mac);
305 +       }
306 +
307 +       if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
308 +               athxk_eeprom_mac[5] += mac_inc;
309 +
310 +       ath5k_pdata.macaddr = athxk_eeprom_mac;
311 +       ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
312 +
313 +       dev_info(&pdev->dev, "loaded ath5k eeprom\n");
314 +
315 +       return 0;
316 +}
317 +
318 +static struct of_device_id ath5k_eeprom_ids[] = {
319 +       { .compatible = "ath5k,eeprom" },
320 +       { }
321 +};
322 +
323 +static struct platform_driver ath5k_eeprom_driver = {
324 +       .driver         = {
325 +               .name           = "ath5k,eeprom",
326 +               .owner  = THIS_MODULE,
327 +               .of_match_table = of_match_ptr(ath5k_eeprom_ids),
328 +       },
329 +};
330 +
331 +static int __init of_ath5k_eeprom_init(void)
332 +{
333 +       return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
334 +}
335 +device_initcall(of_ath5k_eeprom_init);
336 --- /dev/null
337 +++ b/arch/mips/lantiq/xway/eth_mac.c
338 @@ -0,0 +1,76 @@
339 +/*
340 + *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
341 + *
342 + *  This program is free software; you can redistribute it and/or modify it
343 + *  under the terms of the GNU General Public License version 2 as published
344 + *  by the Free Software Foundation.
345 + */
346 +
347 +#include <linux/init.h>
348 +#include <linux/module.h>
349 +#include <linux/of_platform.h>
350 +#include <linux/if_ether.h>
351 +
352 +static u8 eth_mac[6];
353 +static int eth_mac_set;
354 +
355 +const u8* ltq_get_eth_mac(void)
356 +{
357 +       return eth_mac;
358 +}
359 +
360 +static int __init setup_ethaddr(char *str)
361 +{
362 +       eth_mac_set = mac_pton(str, eth_mac);
363 +       return !eth_mac_set;
364 +}
365 +early_param("ethaddr", setup_ethaddr);
366 +
367 +int __init of_eth_mac_probe(struct platform_device *pdev)
368 +{
369 +       struct device_node *np = pdev->dev.of_node;
370 +       struct resource *mac_res;
371 +       void __iomem *mac;
372 +       u32 mac_inc = 0;
373 +
374 +       if (eth_mac_set) {
375 +               dev_err(&pdev->dev, "mac was already set by bootloader\n");
376 +               return -EINVAL;
377 +       }
378 +       mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
379 +
380 +       if (!mac_res) {
381 +               dev_err(&pdev->dev, "failed to load mac\n");
382 +               return -EINVAL;
383 +       }
384 +       if (resource_size(mac_res) != 6) {
385 +               dev_err(&pdev->dev, "mac has an invalid size\n");
386 +               return -EINVAL;
387 +       }
388 +       mac = ioremap(mac_res->start, resource_size(mac_res));
389 +       memcpy_fromio(eth_mac, mac, 6);
390 +
391 +       if (!of_property_read_u32(np, "mac-increment", &mac_inc))
392 +               eth_mac[5] += mac_inc;
393 +
394 +       return 0;
395 +}
396 +
397 +static struct of_device_id eth_mac_ids[] = {
398 +       { .compatible = "lantiq,eth-mac" },
399 +       { /* sentinel */ }
400 +};
401 +
402 +static struct platform_driver eth_mac_driver = {
403 +       .driver         = {
404 +               .name           = "lantiq,eth-mac",
405 +               .owner  = THIS_MODULE,
406 +               .of_match_table = of_match_ptr(eth_mac_ids),
407 +       },
408 +};
409 +
410 +static int __init of_eth_mac_init(void)
411 +{
412 +       return platform_driver_probe(&eth_mac_driver, of_eth_mac_probe);
413 +}
414 +device_initcall(of_eth_mac_init);
415 --- /dev/null
416 +++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
417 @@ -0,0 +1,118 @@
418 +/*
419 + *  Atheros AP94 reference board PCI initialization
420 + *
421 + *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
422 + *
423 + *  This program is free software; you can redistribute it and/or modify it
424 + *  under the terms of the GNU General Public License version 2 as published
425 + *  by the Free Software Foundation.
426 + */
427 +
428 +#include <linux/pci.h>
429 +#include <linux/init.h>
430 +#include <linux/delay.h>
431 +#include <lantiq_soc.h>
432 +
433 +struct ath_fixup {
434 +       u16             *cal_data;
435 +       unsigned        slot;
436 +};
437 +
438 +static int ath_num_fixups;
439 +static struct ath_fixup ath_fixups[2];
440 +
441 +static void ath_pci_fixup(struct pci_dev *dev)
442 +{
443 +       void __iomem *mem;
444 +       struct pci_dev *bridge = pci_upstream_bridge(dev); 
445 +       u16 *cal_data = NULL;
446 +       u16 cmd;
447 +       u32 bar0;
448 +       u32 val;
449 +       u32 base;
450 +       unsigned i;
451 +
452 +       for (i = 0; i < ath_num_fixups; i++) {
453 +               if (ath_fixups[i].cal_data == NULL)
454 +                       continue;
455 +
456 +               if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
457 +                       continue;
458 +
459 +               cal_data = ath_fixups[i].cal_data;
460 +               break;
461 +       }
462 +
463 +       if (cal_data == NULL)
464 +               return;
465 +
466 +       if (*cal_data != 0xa55a) {
467 +               pr_err("pci %s: invalid calibration data\n", pci_name(dev));
468 +               return;
469 +       }
470 +
471 +       pr_info("pci %s: fixup device configuration\n", pci_name(dev));
472 +
473 +       base = dev->resource[0].start;
474 +       mem = ioremap(base, 0x10000);
475 +       if (!mem) {
476 +               pr_err("pci %s: ioremap error\n", pci_name(dev));
477 +               return;
478 +       }
479 +
480 +       if (bridge) {
481 +               pci_enable_device(dev);
482 +       }
483 +
484 +       pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
485 +       pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, base);
486 +       pci_read_config_word(dev, PCI_COMMAND, &cmd);
487 +       cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
488 +       pci_write_config_word(dev, PCI_COMMAND, cmd);
489 +
490 +       /* set pointer to first reg address */
491 +       cal_data += 3;
492 +       while (*cal_data != 0xffff) {
493 +               u32 reg;
494 +               reg = *cal_data++;
495 +               val = *cal_data++;
496 +               val |= (*cal_data++) << 16;
497 +
498 +               ltq_w32(swab32(val), mem + reg);
499 +               udelay(100);
500 +       }
501 +
502 +       pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
503 +       dev->vendor = val & 0xffff;
504 +       dev->device = (val >> 16) & 0xffff;
505 +
506 +       pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
507 +       dev->revision = val & 0xff;
508 +       dev->class = val >> 8; /* upper 3 bytes */
509 +
510 +       pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", 
511 +               pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
512 +
513 +       pci_read_config_word(dev, PCI_COMMAND, &cmd);
514 +       cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
515 +       pci_write_config_word(dev, PCI_COMMAND, cmd);
516 +
517 +       pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
518 +
519 +       if (bridge) {
520 +               pci_disable_device(dev);
521 +       }
522 +
523 +       iounmap(mem);
524 +}
525 +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
526 +
527 +void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
528 +{
529 +       if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
530 +               return;
531 +
532 +       ath_fixups[ath_num_fixups].slot = slot;
533 +       ath_fixups[ath_num_fixups].cal_data = cal_data;
534 +       ath_num_fixups++;
535 +}
536 --- /dev/null
537 +++ b/arch/mips/lantiq/xway/rt_eep.c
538 @@ -0,0 +1,60 @@
539 +/*
540 + *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
541 + *
542 + *  This program is free software; you can redistribute it and/or modify it
543 + *  under the terms of the GNU General Public License version 2 as published
544 + *  by the Free Software Foundation.
545 + */
546 +
547 +#include <linux/init.h>
548 +#include <linux/module.h>
549 +#include <linux/pci.h>
550 +#include <linux/platform_device.h>
551 +#include <linux/rt2x00_platform.h>
552 +
553 +extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
554 +static struct rt2x00_platform_data rt2x00_pdata;
555 +
556 +static int rt2x00_pci_plat_dev_init(struct pci_dev *dev)
557 +{
558 +       dev->dev.platform_data = &rt2x00_pdata;
559 +       return 0;
560 +}
561 +
562 +int __init of_ralink_eeprom_probe(struct platform_device *pdev)
563 +{
564 +       struct device_node *np = pdev->dev.of_node;
565 +       const char *eeprom;
566 +
567 +       if (of_property_read_string(np, "ralink,eeprom", &eeprom)) {
568 +               dev_err(&pdev->dev, "failed to load eeprom filename\n");
569 +               return 0;
570 +       }
571 +
572 +       rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
573 +//     rt2x00_pdata.mac_address = mac;
574 +       ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init;
575 +
576 +       dev_info(&pdev->dev, "using %s as eeprom\n", eeprom);
577 +
578 +       return 0;
579 +}
580 +
581 +static struct of_device_id ralink_eeprom_ids[] = {
582 +       { .compatible = "ralink,eeprom" },
583 +       { }
584 +};
585 +
586 +static struct platform_driver ralink_eeprom_driver = {
587 +       .driver         = {
588 +               .name           = "ralink,eeprom",
589 +               .owner  = THIS_MODULE,
590 +               .of_match_table = of_match_ptr(ralink_eeprom_ids),
591 +       },
592 +};
593 +
594 +static int __init of_ralink_eeprom_init(void)
595 +{
596 +       return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
597 +}
598 +device_initcall(of_ralink_eeprom_init);
599 --- a/drivers/net/ethernet/lantiq_etop.c
600 +++ b/drivers/net/ethernet/lantiq_etop.c
601 @@ -840,7 +840,11 @@ ltq_etop_init(struct net_device *dev)
602         if (err)
603                 goto err_hw;
604  
605 -       memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
606 +       memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN);
607 +
608 +       if (priv->mac && !is_valid_ether_addr(mac.sa_data))
609 +               memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
610 +
611         if (!is_valid_ether_addr(mac.sa_data)) {
612                 pr_warn("etop: invalid MAC, using random\n");
613                 eth_random_addr(mac.sa_data);