target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR300.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
   9         model = "Buffalo WBMR-300HPD";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_g;
  17                 led-failsafe = &diag_r;
  18                 led-running = &power_g;
  19
  20                 led-dsl = &dsl;
  21                 led-internet = &router_g;
  22                 led-wifi = &wifi_g;
  23         };
  24
  25         memory@0 {
  26                 reg = <0x0 0x4000000>;
  27         };
  28
  29         fpi@10000000 {
  30                 gpio: pinmux@E100B10 {
  31                         pinctrl-names = "default";
  32                         pinctrl-0 = <&state_default>;
  33
  34                         state_default: pinmux {
  35                                 mdio {
  36                                         lantiq,groups = "mdio";
  37                                         lantiq,function = "mdio";
  38                                 };
  39                                 phy-rst {
  40                                         lantiq,pins = "io42";
  41                                         lantiq,pull = <0>;
  42                                         lantiq,open-drain = <0>;
  43                                         lantiq,output = <1>;
  44                                 };
  45                                 pcie-rst {
  46                                         lantiq,pins = "io38";
  47                                         lantiq,pull = <0>;
  48                                         lantiq,output = <1>;
  49                                 };
  50                         };
  51                         pins_spi_default: pins_spi_default {
  52                                 spi_in {
  53                                         lantiq,groups = "spi_di";
  54                                         lantiq,function = "spi";
  55                                 };
  56                                 spi_out {
  57                                         lantiq,groups = "spi_do", "spi_clk",
  58                                                 "spi_cs4";
  59                                         lantiq,function = "spi";
  60                                         lantiq,output = <1>;
  61                                 };
  62                         };
  63                 };
  64
  65                 ifxhcd@E101000 {
  66                         status = "okay";
  67                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  68                         lantiq,portmask = <0x3>;
  69                 };
  70
  71                 ifxhcd@E106000 {
  72                         status = "okay";
  73                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  74                 };
  75         };
  76
  77         gphy-xrx200 {
  78                 compatible = "lantiq,phy-xrx200";
  79                 firmware = "lantiq/xrx200_phy22f_a22.bin";
  80                 phys = [ 00 01 ];
  81         };
  82
  83         gpio_poweroff {
  84                 compatible = "gpio-poweroff";
  85                 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  86         };
  87
  88         gpio-keys-polled {
  89                 compatible = "gpio-keys-polled";
  90                 #address-cells = <1>;
  91                 #size-cells = <0>;
  92                 poll-interval = <100>;
  93
  94                 power {
  95                         label = "power";
  96                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_POWER>;
  98                 };
  99
 100                 reset {
 101                         label = "reset";
 102                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 103                         linux,code = <KEY_RESTART>;
 104                 };
 105
 106                 wps {
 107                         label = "wps";
 108                         gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
 109                         linux,code = <KEY_WPS_BUTTON>;
 110                 };
 111
 112                 auto {
 113                         label = "auto";
 114                         gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
 115                         linux,code = <BTN_0>;
 116                         linux,input-type = <EV_SW>;
 117                 };
 118
 119                 router {
 120                         label = "router";
 121                         gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
 122                         linux,code = <BTN_1>;
 123                         linux,input-type = <EV_SW>;
 124                 };
 125         };
 126
 127         gpio-leds {
 128                 compatible = "gpio-leds";
 129
 130                 diag_r: diag_r {
 131                         label = "wbmr300:red:diag";
 132                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 133                         default_state = "off";
 134                 };
 135
 136                 wifi_g: wifi_g {
 137                         label = "wbmr300:green:wifi";
 138                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 139                 };
 140
 141                 dsl: dsl {
 142                         label = "dsl";
 143                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
 144                 };
 145
 146                 router_y: router_y {
 147                         label = "wbmr300:yellow:router";
 148                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 149                 };
 150
 151                 wifi_y: wifi_y {
 152                         label = "wbmr300:yellow:wifi";
 153                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
 154                 };
 155
 156                 lan1: lan1 {
 157                         label = "wbmr300:green:lan1";
 158                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
 159                 };
 160
 161                 wan: wan {
 162                         label = "wbmr300:green:wan";
 163                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
 164                 };
 165
 166                 lan3: lan3 {
 167                         label = "wbmr300:green:lan3";
 168                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
 169                 };
 170
 171                 lan2: lan2 {
 172                         label = "wbmr300:green:lan2";
 173                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 174                 };
 175
 176                 internet_g: internet_g {
 177                         label = "wbmr300:green:internet";
 178                         gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
 179                 };
 180
 181                 internet_y: internet_y {
 182                         label = "wbmr300:yellow:internet";
 183                         gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 184                 };
 185
 186                 router_g: router_g {
 187                         label = "wbmr300:green:router";
 188                         gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
 189                 };
 190
 191                 power_g: power_g {
 192                         label = "wbmr300:green:power";
 193                         gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
 194                 };
 195         };
 196 };
 197
 198 &spi {
 199         pinctrl-names = "default";
 200         pinctrl-0 = <&pins_spi_default>;
 201
 202         status = "ok";
 203         m25p80@4 {
 204                 #address-cells = <1>;
 205                 #size-cells = <1>;
 206                 compatible = "jedec,spi-nor";
 207                 reg = <4 0>;
 208                 spi-max-frequency = <20000000>;
 209
 210                 partition@0 {
 211                         reg = <0x0 0x10000>;
 212                         label = "u-boot";
 213                         read-only;
 214                 };
 215
 216                 partition@10000 {
 217                         reg = <0x10000 0x10000>;
 218                         label = "gphyfirmware";
 219                         read-only;
 220                 };
 221
 222                 partition@20000 {
 223                         reg = <0x20000 0x80000>;
 224                         label = "dsl_fw";
 225                 };
 226
 227                 partition@de0000 {
 228                         reg = <0xa0000 0xf40000>;
 229                         label = "firmware";
 230                 };
 231
 232                 partition@fe0000 {
 233                         reg = <0xfe0000 0x10000>;
 234                         label = "sysconfig";
 235                         read-only;
 236                 };
 237
 238                 partition@ff0000 {
 239                         reg = <0xff0000 0x2000>;
 240                         label = "ubootconfig";
 241                 };
 242
 243                 partition@ff3000 {
 244                         reg = <0xff3000 0x2000>;
 245                         label = "board_config";
 246                         read-only;
 247                 };
 248         };
 249 };
 250
 251 &eth0 {
 252         lan: interface@0 {
 253                 compatible = "lantiq,xrx200-pdi";
 254                 #address-cells = <1>;
 255                 #size-cells = <0>;
 256                 reg = <0>;
 257                 lantiq,switch;
 258
 259                 ethernet@1 {
 260                         compatible = "lantiq,xrx200-pdi-port";
 261                         reg = <4>;
 262                         phy-mode = "mii";
 263                         phy-handle = <&phy13>;
 264                 };
 265                 ethernet@2 {
 266                         compatible = "lantiq,xrx200-pdi-port";
 267                         reg = <5>;
 268                         phy-mode = "mii";
 269                         phy-handle = <&phy14>;
 270                 };
 271                 ethernet@3 {
 272                         compatible = "lantiq,xrx200-pdi-port";
 273                         reg = <2>;
 274                         phy-mode = "mii";
 275                         phy-handle = <&phy11>;
 276                 };
 277                 ethernet@4 {
 278                         compatible = "lantiq,xrx200-pdi-port";
 279                         reg = <3>;
 280                         phy-mode = "mii";
 281                         phy-handle = <&phy12>;
 282                 };
 283         };
 284
 285         mdio@0 {
 286                 #address-cells = <1>;
 287                 #size-cells = <0>;
 288                 compatible = "lantiq,xrx200-mdio";
 289                 phy11: ethernet-phy@11 {
 290                         reg = <0x11>;
 291                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 292                 };
 293                 phy12: ethernet-phy@12 {
 294                         reg = <0x12>;
 295                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 296                 };
 297                 phy13: ethernet-phy@13 {
 298                         reg = <0x13>;
 299                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 300                 };
 301                 phy14: ethernet-phy@14 {
 302                         reg = <0x14>;
 303                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 304                 };
 305         };
 306 };