target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7525PW.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
   9         model = "Speedport W303V Typ A";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_green;
  17                 led-failsafe = &power_red;
  18                 led-running = &power_green;
  19
  20                 led-dsl = &power_green;
  21                 led-internet = &online;
  22                 led-wifi = &wifi;
  23         };
  24
  25         memory@0 {
  26                 reg = <0x0 0x2000000>;
  27         };
  28
  29         gpio-keys-polled {
  30                 compatible = "gpio-keys-polled";
  31                 #address-cells = <1>;
  32                 #size-cells = <0>;
  33                 poll-interval = <100>;
  34
  35                 wps {
  36                         label = "wps";
  37                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                 };
  40                 reset {
  41                         label = "reset";
  42                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_RESTART>;
  44                 };
  45         };
  46
  47         gpio-leds {
  48                 compatible = "gpio-leds";
  49                 power_green: power {
  50                         label = "arv7525pw:green:power";
  51                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  52                         default-state = "keep";
  53                 };
  54                 power_red: power1 {
  55                         label = "arv7525pw:red:power";
  56                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  57                 };
  58                 online: online {
  59                         label = "arv7525pw:green:online";
  60                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  61                 };
  62                 voice {
  63                         label = "arv7525pw:green:telefonie";
  64                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  65                 };
  66                 voice2 {
  67                         label = "arv7525pw:red:telefonie";
  68                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  69                 };
  70                 wifi: wifi {
  71                         label = "arv7525pw:green:wlan";
  72                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  73                 };
  74         };
  75 };
  76
  77 &gpio {
  78         pinctrl-names = "default";
  79         pinctrl-0 = <&state_default>;
  80
  81         state_default: pinmux {
  82                 exin {
  83                         lantiq,groups = "exin1";
  84                         lantiq,function = "exin";
  85                 };
  86                 pci {
  87                         lantiq,groups = "gnt1", "req1";
  88                         lantiq,function = "pci";
  89                 };
  90         };
  91 };
  92
  93 &gsw {
  94         phy-mode = "mii";
  95         mtd-mac-address = <&boardconfig 0x16>;
  96 };
  97
  98 &localbus {
  99         nor@0 {
 100                 compatible = "lantiq,nor";
 101                 bank-width = <2>;
 102                 reg = <0 0x0 0x2000000>;
 103                 #address-cells = <1>;
 104                 #size-cells = <1>;
 105
 106                 partitions {
 107                         compatible = "fixed-partitions";
 108                         #address-cells = <1>;
 109                         #size-cells = <1>;
 110
 111                         partition@0 {
 112                                 label = "uboot";
 113                                 reg = <0x00000 0x10000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@10000 {
 118                                 label = "uboot_env";
 119                                 reg = <0x10000 0x10000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@20000 {
 124                                 label = "firmware";
 125                                 reg = <0x20000 0x3d0000>;
 126                         };
 127
 128                         boardconfig: partition@400000 {
 129                                 label = "board_config";
 130                                 reg = <0x3f0000 0x10000>;
 131                                 read-only;
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &pci0 {
 138         status = "okay";
 139         interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
 140
 141         wifi@0,0 {
 142                 compatible = "pci0,0";
 143                 reg = <0x7000 0 0 0 0>;
 144                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 145         };
 146 };
 147
 148 &vmmc {
 149         status = "okay";
 150         gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
 151 };